This is six in a row jim again there for a while I was losing water pumps in my old 91.5 dodge put like three of them in over four year period of time maybe was less than four years I can’t remember but when I switched over to Amsoil antifreeze problem went away oh thank you
Mopar parts are very expensive. On my Ram my alternator went out. Did some research it turns out Bosch made it but they put the Mopar stamp on it. I bought the Bosch one instead of Mopar on rockauto. Saved a lot of money.
New Subscriber! Thanks for the video. I have a 14' Ram 6.7 Cummins. It had the water pump recall done on it a while back. I only have 48k on it. It's been using a little antifreeze and I can smell it towards the front of the engine. I can't see anything leaking, but I have a feeling it's the seep hole in the waterpump. How has that car quest pump been holding up? Any ideas on the antifreeze issue? Thank!
Awesome vid keep the vids coming, but should of gotten a gates water pump from Napa, or genos garage. Or a mopar/Cummins brand. Advance auto, autozone, Oreillys pumps don’t last you be lucky if they last a year. I’ve tried them all. My gates pump has lasted for 3yrs now.
Great help. Thank You! I have the same intake and deletes on the passenger side and made it real helpful to see what was going on and what to expect. Thank You.
Great video, thanks. I waited, and then blew the serpentine belt hauling a trailer of cattle in the snow here in Canada with my kid and 9 months pregnant wife... Now back in my shop watching your video and repairing. Wish I just got on it right away, easy job!
Thank you for sharing. I notice your ram has a coolant bleeder however, I have a 2014 and when I look all I can see is banjo bolt with a hose connected to the overflow tank. Do you know if the 2014 ram has a bleeder or how to remove any air in the system?
im not sure if the 2013 and newer have that bleeder screw up top. tbh its not really efficent cause coolant runs out of it and gets on the manifold and makes a mess. i bleed it from the radiator cap removed until no more bubbles.
I’ve forgot with your first name is but next time you go to drain your radiator don’t go for the cockpit below use a siphon hose you got a crossflow radiator you can get right to the bottom and that’ll save you from loosen that Amsoil court are use the same products the best of the best as far as I’m concerned hey nice truck man this is six in a row jim so you have a good day
Instead of before/after shots, set up your camera and video taking things off and putting them back on is much more helpful. You and I have the same truck so your instructional videos are SO helpful to me. Thank you.
Yeah I do that for more difficult jobs. Water pump job is pretty upfront. Filming is a lot more work than most people think. Thank you though man. The turbo video will be full detailed
I have it on my truck. Let me tell you that my truck runs 11 degreas cooler. On the high way the motor is quit on fuel miles I can’t tell you if it’s better on not becauxe I only drive it on the week ends to go on rides messing around and stuff. But it was well worth the money. I have the part number for the belt you can use when you delet the ran pull. Truck runs about 184 temp. I rarely hear the fans kick on
Thanks bro. It was a simple job for the most part. Haha we'll see how long it last if I get 50k out a this one that ain't bad. I put 40k on my truck before it went bad and idk how long it was on before
Well that saved you 110$ an hour! At a shop. I was going to film the build sheet on the truck today but it’s raining. Cheak out my last vid with my girl 😀 your going to get a kick on how she drives it’s lol!!
5.9 cummins owner. Its all about the U!!!!
Good procedure.
Thanks bro
This is six in a row jim again there for a while I was losing water pumps in my old 91.5 dodge put like three of them in over four year period of time maybe was less than four years I can’t remember but when I switched over to Amsoil antifreeze problem went away oh thank you
Yessir!
Mopar parts are very expensive. On my Ram my alternator went out. Did some research it turns out Bosch made it but they put the Mopar stamp on it. I bought the Bosch one instead of Mopar on rockauto. Saved a lot of money.
That's smart. Yeah my I had to change my alternator too last year. I went with the cheap120 ones lol
Juanin Elmascabron - Thanks for the knowledge tip
New Subscriber! Thanks for the video. I have a 14' Ram 6.7 Cummins. It had the water pump recall done on it a while back. I only have 48k on it. It's been using a little antifreeze and I can smell it towards the front of the engine. I can't see anything leaking, but I have a feeling it's the seep hole in the waterpump. How has that car quest pump been holding up? Any ideas on the antifreeze issue? Thank!
I have a box truck, 2011 with a Cummins. Is that the same coolant?
Yessir
How many miles were on your truck?
Bro!!!!! You just saved me a ton of unbolting shit to get that shroud off!
Haha no worries man!
Awesome vid keep the vids coming, but should of gotten a gates water pump from Napa, or genos garage. Or a mopar/Cummins brand. Advance auto, autozone, Oreillys pumps don’t last you be lucky if they last a year. I’ve tried them all. My gates pump has lasted for 3yrs now.
Yeah when this one goes out I'll probably get a oem one.
Great help. Thank You! I have the same intake and deletes on the passenger side and made it real helpful to see what was going on and what to expect. Thank You.
When a water pump goes bad does it always leak coolant Or it can go bad and not leak?
Great video, thanks. I waited, and then blew the serpentine belt hauling a trailer of cattle in the snow here in Canada with my kid and 9 months pregnant wife... Now back in my shop watching your video and repairing. Wish I just got on it right away, easy job!
glad to help man and know you got it fixed and nothing bad happened.
Mine went out on my 09 omw to GA from FL. The pulley snapped clean off.
Woah. That's shitty. If that happened to me I would've had it towed to a part store and changed it out myself.
Heads up when you do the s400 if you keep the s&b box it's a tight fit.
yeah it comes with it new intake
@@EVERYTHANGDIESEL on my smeding I had to flip the intake tube to fit the sensors with my s&b box
Since I wanted to keep the box
U ran the stock s&b box with the smeding kit?
@@EVERYTHANGDIESEL that's how it's on now, do you know something I don't know?
Thank you for sharing. I notice your ram has a coolant bleeder however, I have a 2014 and when I look all I can see is banjo bolt with a hose connected to the overflow tank. Do you know if the 2014 ram has a bleeder or how to remove any air in the system?
im not sure if the 2013 and newer have that bleeder screw up top. tbh its not really efficent cause coolant runs out of it and gets on the manifold and makes a mess. i bleed it from the radiator cap removed until no more bubbles.
I’ve forgot with your first name is but next time you go to drain your radiator don’t go for the cockpit below use a siphon hose you got a crossflow radiator you can get right to the bottom and that’ll save you from loosen that Amsoil court are use the same products the best of the best as far as I’m concerned hey nice truck man this is six in a row jim so you have a good day
Instead of before/after shots, set up your camera and video taking things off and putting them back on is much more helpful. You and I have the same truck so your instructional videos are SO helpful to me. Thank you.
Yeah I do that for more difficult jobs. Water pump job is pretty upfront. Filming is a lot more work than most people think. Thank you though man. The turbo video will be full detailed
What catch can is that and where can I get it? It looks sick
From Amazon
checkout my video when i installed the catch can. i l have the link for it in the description box.
Changed my water pump today thanks to you. Good shit bro
Just wait till you have to replace the A/C evaporator.
Already did lol
Not factory pump. mopar pumps have steel blades. you should have left coolant out you'll need to drain agine when doing turbo swap
Oh ok I had a feeling but wasn't sure when i drain the coolant imma just save it in my buckets.
@@EVERYTHANGDIESEL small advice get parts from Cummins. Mopar to high and it's Cummins parts anyways.
thanks man
Nice one 👍 that’s why I drive a Cummins ! Changing a water pump is a piece of cake 🎂 do this on Ford or Chevy.....😅
Yeah I would've still been filming with a spot light at night had it been a power stroke lol
EVERYTHANG DIESEL hahaha that’s for sure 😅😂
that's the highest quality video in terms of clarity (clear picture) I've ever seen on youtube. Nice. Must be a real nice Gopro camera.
It wasnt a go pro but thank you man I appreciate it a lot!
Move bumper next???
Not gonna lie man I like those bumpers, but then I still like the 3rd gen sport bumper. Lol I like iron cross bumpers too but they want money
Great info
Hey bro ... wanna come to north Carolina and do mine for me lol
Great video man. Ty
Glad I haven’t had this problem but great explanation man!
ThNkz man! Yeah you might have one of those sweet built water pumps or urs is a just a beast lol
Wish Dmax pumps where that easy!!
It was pretty upfront. Working on these engines is almost fool proof Haha
Killing me smalls! I got your notification for new video. I said hell yea, turbo time!!! We waiting very patiently lol
Dont worry man itll be soon. Haha waiting on a few more things
EVERYTHANG DIESEL
Lovin the videos man! Keep them coming
Got one coming later tonight too around 9ish! 🙌🏾
EVERYTHANG DIESEL woohoo! Hell yea man. Can’t wait bro, your videos rock dude
I am getting ready to replace my fan with an electric fan. It's going to be some work but well worth it.
It won't be that bad man. Once u get old fan out u got a lot of room to work with.
I have it on my truck. Let me tell you that my truck runs 11 degreas cooler. On the high way the motor is quit on fuel miles I can’t tell you if it’s better on not becauxe I only drive it on the week ends to go on rides messing around and stuff. But it was well worth the money. I have the part number for the belt you can use when you delet the ran pull. Truck runs about 184 temp. I rarely hear the fans kick on
Nice man yeah everybody tell me they see like a 15 degree drop in temp
Holy hell!! Good job man I just love this truck man!!!
Thanks bro. It was a simple job for the most part. Haha we'll see how long it last if I get 50k out a this one that ain't bad. I put 40k on my truck before it went bad and idk how long it was on before
Well that saved you 110$ an hour! At a shop. I was going to film the build sheet on the truck today but it’s raining. Cheak out my last vid with my girl 😀 your going to get a kick on how she drives it’s lol!!
Yeah man I can't be paying that mopar labor to people i gotta save money.
I'll check it out too man!
Just remove the alternate after you move the air cleaner
Lost that Amsoil coolant, bummer
i was pretty pissed when i was draining it man im telling you.
Thanks for the vid!
Please stop saying CUMMINGS 🤣
Your welcome!
Zero reason to remove shroud
Correct, just makes for more elbow room
Like a Boss, thanks for the tips!
No torque to spec? That's terrible.