Home Theater Receiver Menu Settings Explanation for Onkyo & Integra | Dolby Atmos, DTS X
Вставка
- Опубліковано 10 лип 2021
- Tutorial for Dolby Atmos and DTS X Receiver menu settings. Explanation to configure Onkyo and Integra. This walkthrough is for home theater receivers. In particular Onkyo and Integra because they do share similar menus and options.
The TV inputs and outputs will be covered which will include Dolby vision and 4K upscaling settings. Zone 2 End Zone 3 through HDMI. The on-screen display settings .
Analog video input settings which include the game input, cable satellite, Stream box, PC, CD, TV, phono, Blu-ray and DVD. speaker configuration which starts at 2 Channel and goes all the way up to 11.1.4. subwoofer settings.
front height channels and rear height channels as well as overhead High channel speakers. Setting the speaker impedance. And subwoofer settings.
Setting the crossover which will include setting the speakers to full band with or too small and choosing the crossover frequency. Low-frequency effect filter and double bass explained.
Setting the level calibration which is the volume settings for each speaker. the graphic equalizer setting. Thx audio settings including loudness Plus. settings for mono Source signals, Multiplex. DTS and IMAX settings. Setting the volume. HDMI pass-through.
Power management such as the receivers Auto standby and sleep timers. And also a few of the quick menu features of the Onkyo TX - rz840.
#hometheater #onkyomenu #receivermenu If you would like me to consider reviewing your product please send a email to OldTradesAudio@Hotmail.com. All other product related questions should be posted in the comments section of the video.
I appreciate everyone's help and support in keeping this channel going. By clicking on the links, and making a purchase the same day, I may receive a small commission. This does not affect your purchase price. Many of these locations I have purchased from in the past. Some will have more advantages then others. Thank You for your channel support.
Brands Direct
SVS fxo.co/CilZ
Polk Audio fxo.co/Cil5
Marantz fxo.co/Cil6
Sennheiser fxo.co/CilD
Logitech fxo.co/CilF
Denon fxo.co/CilI
Monoprice fxo.co/Cilb
GoPro fxo.co/Cilf
Bose fxo.co/Cili
Sonos fxo.co/CixW
Multi Brand Stores
Best Buy fxo.co/Cilj
Ashley Homestore fxo.co/Cilk
Adorama fxo.co/Ciln
Abt Electronics fxo.co/Cilp
Ebay for used and new ebay.us/bGz5x6
GameStop fxo.co/CixX
Misc
Cinemark Theaters fxo.co/CixG Sideshow Collectibles and Statues fxo.co/Cj0K
If you would like me to review your product please send a email to OldTradesAudio@Hotmail.com Bowers and Wilkins www.pntrac.com/t/TUJGR0xGRkJH... Definitive Technology www.pntrac.com/t/TUJGR0tOS0JH... ..... Klipsch www.pntrs.com/t/TUJGR0lITUJHS... Crutchfield www.pntra.com/t/TUJGR0hGSkJHS...
Oh, my God! I feel overwhelmed trying to set this Onkyo receiver.
Very good and thorough information. Thank you.
Thanks for this, I really appreciate it!
Where do you set the speaker size when setting up system? Manual says front and rear speakers should be set to large and center set to small. I can't find where I set these to any size
Do you know when the optimized audio will be available on older Onkyo models, like the RZ-730? Thank you in advance
Thank you for the video. I picked up an Onkyo TX-NR727 receiver. I am using it with Bose Acustimass speakers (5.1). After several attempts to refine the sound, I am struggling with how different TV channels send different signals. I hate to have to adjust the sound settings for each channel I watch. Is DTS the way to go or All-Room Surround? I would think these receivers could auto-switch to reflect the best sound for the signal it receives. Any advice?
I used to run for while older integra with double bass sounded good had it plug to Cambridge tower 1 and pair of velodyne subs
I just purchased the 6100. Not sure what AV receiver you’re using in your video, but will I be able to do the set up on the TV screen like you’re doing?
I got this receiver but I can’t get the center channel, back left and right surround to play any audio when playing movies/music. But when I tired the setup input in the receiver each channel played audio perfectly fine. I have everything plugged in correctly I can’t find an answer.
I am not able to get the quick menu up while watching live tv from Verizon Fios digital box. How do you bring it up? Iwould like to do like you did with isolating certain speakers. I am using the onkyo TX NR 838 receiver.
My new Onkyo 6100 sends audio to the projector and not to the speakers (the speakers are connected correctly and working when playing via wifi ). what do I need to change in the configuration to send the audio to the speakers instead of the projector ?
Does it speakers indicators change on AVR display when different audio format is playing? For example for playing stereo only two indicators and for 5.1, 7.1 more speakers indicators, please let me know.
I can't get this screen to be on the TV. I guess I have to get an engineering degree. Does anyone know if I can set up only 2 speakers with my Onkyo 7.1? I've connected my receiver to the TV using an RCA to 3.5mm cable.
I just hooked up a tx-nr 727 onkyo. I had it for 6 years. Brand new. Back up for when Sony es 5300 failed. It failed. The hybrid standby light came on. Stays on. Is this ok?
Can we set it up the settings without speaker connection Sir? Because mine is in the repair shop and I leave my speakers in home.
Does the sub channel EQ also starts with 25Hz?
This video is older but maybe you will respond, I'm using a Kicker L7 15" Pushing 1800 Watts peak with My home theatre system its obviously powered not with receiver it's already insanely loud but I'm wondering what you think I should be using for lfe for more bass? I'm just wondering if I could be getting even more then I have you can see my videos of the sub in the house and how it's powered
My onkyo receiver TX-nr585 isn't connecting to my Samsung smart TV. I am looking to use the arc function. Not connected the sources to the receiver. They are connected to the TV. Pl can you assist
Great video ! Thanks my Dirac Life not working error message network connection.
Will this work with the Onkyo TX NR 6050?