The reason why the backpack is not snapping together, is because the two parts holding the mechanic of the wing sliding in and out is swapped. The two male and female connections are not on the same line, one is slightly lower than the other. Just need to be careful. I had to take it of a couple of times as well. But there is an extra section on the manual, wasn't really paying attention to it and I did what I do as usual - cut all the parts I need out of the runner and assemble them all together, well doesn't work in this case. Hope it is not bugging you anymore.
I hope the Justice gets a REVIVE kit like the Freedom is getting. I like this and all, but high grades have improved tremendously compared to where they were back when SEED and Destiny were out, and as cool as this is, I'd be a little worried about breaking some of the parts.
Cool! I've just finish building my RG Justice last weekend. It is the most solid RG kit I have, although I only have 3, this is the best one by far! I wanna see you make Freedom and Justice hold hands, just like in the show. ahahaha.. Just imagining two machines/robots of death walking around holding hands is epic!!!
great review -- I hope you end up getting RG Zeta and the Nu ver Ka, since your reviews are always spot-on (and have influenced a number of my purchasing decisions). Keep up the fantastic work, and have a great holiday jabman!
I think the massive forehead camera is clear for those wanting options, like make it metallic blue behind it for a different effect. Still would have been nice if an option part was included.
I'm pretty sure that weird dynamic hand is actually meant to lock in with the one on the Freedom that way you can recreate that one scene where the Justice is reaching out for the Freedom while they're trying to leave orbit.
the best RG for me is the Mk-II. go try that one out! and yup, justice is a great kit for me, and he will look stale without a freedom around. have fun building them! though freedom's wings are a pain
I got a quick question! I just got into the Gundam models about 3 months ago and I've built 2 high grades and one real grade this one actually. Would you recommend gluing some pieces on high grades?
I do have one question about this kit, and that is. What do you do if parts are constantly falling off, because with mine the waist likes to disconnect the front skirts just don't stay on, and the V shaped head crest constantly falls off, how do I fix that?
Hey do you happen to have the MG MS-09RS RICK DOM Char Custom? If so could you post a review on it =) I'm in the market for my next Char Custom suit and I don't have any of the DOM models yet o.O
Wait, wait, wait, wait, wait... They go out of their way to make a RG of a machine that doesn't even have an MG, and then they forget to even give you a sticker for Athrun Zala's ridiculous signature 'compensating for something' horn on the top of each of his gundam's heads? Bandai.... **groans** Better not make some mistake like this with RG Destiny.
The reason why the backpack is not snapping together, is because the two parts holding the mechanic of the wing sliding in and out is swapped. The two male and female connections are not on the same line, one is slightly lower than the other. Just need to be careful. I had to take it of a couple of times as well. But there is an extra section on the manual, wasn't really paying attention to it and I did what I do as usual - cut all the parts I need out of the runner and assemble them all together, well doesn't work in this case. Hope it is not bugging you anymore.
They were B11 and B12 if anyone wants to know.
I messed that up the first time too lol went back and fixed it before it was too late
Thank you so much for posting this comment! It really helped.
There's now an MG version of the Justice. I'd like to get my hands on that soon!
I've done a review of that too, check it out
I know im 10 years late but glad to know I'm not the only one that has that little gaps on the backpack
really in-depth review, loved the commentary.
The model was out of focus half the time, and that threw me off. However the review was still great
Your wish comes true, jabman. Justice MG is coming out
I hope the Justice gets a REVIVE kit like the Freedom is getting. I like this and all, but high grades have improved tremendously compared to where they were back when SEED and Destiny were out, and as cool as this is, I'd be a little worried about breaking some of the parts.
Yes, he does need a friend^^ Mainly because they both work so really really well together!
Yeah, the gaps in the glider had me frustrated for days. It was an all out war with it.
Cool! I've just finish building my RG Justice last weekend. It is the most solid RG kit I have, although I only have 3, this is the best one by far! I wanna see you make Freedom and Justice hold hands, just like in the show. ahahaha.. Just imagining two machines/robots of death walking around holding hands is epic!!!
great review -- I hope you end up getting RG Zeta and the Nu ver Ka, since your reviews are always spot-on (and have influenced a number of my purchasing decisions). Keep up the fantastic work, and have a great holiday jabman!
I think the massive forehead camera is clear for those wanting options, like make it metallic blue behind it for a different effect. Still would have been nice if an option part was included.
I'm pretty sure that weird dynamic hand is actually meant to lock in with the one on the Freedom that way you can recreate that one scene where the Justice is reaching out for the Freedom while they're trying to leave orbit.
nice honest and obvuous review sir; keep it up
I know it has loose parts but do the joints hold up because i heard they loose up a lot
My RG Freedom had the problem of the torso not fitting well together. Had to use glue to close the gap..
Nice review of the justice, might have to pick him up after building the nu ver. ka
Just built mine the other day. I had no gap problems with the glider at all 0_o. Great kit.
Thanks for the vid.
I'm about to build mine but I can't decide on whether I want the frame to stay black or to paint it silver.
venomman01 ooo silver would look nice
howd you get the beam sabers together? the little plastic bits at the end just snapped off the moment i tried XD
Hey Jabman, does the Action Base 3 come with that Gunpla card insert? Thanks for your videos.
the best RG for me is the Mk-II. go try that one out!
and yup, justice is a great kit for me, and he will look stale without a freedom around. have fun building them! though freedom's wings are a pain
I really wish they would release a rg infinite justice
i am a big fan but i hae 1 question does all the master grade kitsb oe with a okpit where the piolet is
I do like Justice's design but so far I have not bought this RG version and one that I have is old 1/100 NG.
Man i screwed up couple times and start over again, well that's the thing when you build RG.
Jabman word of warning be very careful when you cut off Freedom's facemask mine broke badly
does this kit also has the Z.A.F.T sticker option for the shoulder armor like the RG Freedom?
Any problems with parts popping off on yours? The feet, parts on the glider and the shoulders keep coming off on mine.
I got a quick question! I just got into the Gundam models about 3 months ago and I've built 2 high grades and one real grade this one actually. Would you recommend gluing some pieces on high grades?
I do have one question about this kit, and that is. What do you do if parts are constantly falling off, because with mine the waist likes to disconnect the front skirts just don't stay on, and the V shaped head crest constantly falls off, how do I fix that?
sometimes, the superglue trick works if you know that.
Just built this. The glider came out no probs whatsoever OTHER than the loose flip-over pads for the feet. Those things are crap.
think one of the best RGs i built was the RX-178
What spray paint would you recommend for this kit? preferably colours and primers in the Tamiya range as thats the range my local store carries :)
Oh and one more thing! you should've put your MG 1/100 freedom beside justice instead of the RG freedom box lol.
One such case is MG Red Frame's V-Fin. That thing simply does not connect for me and I've build the damn thing twice.
Hey do you happen to have the MG MS-09RS RICK DOM Char Custom? If so could you post a review on it =) I'm in the market for my next Char Custom suit and I don't have any of the DOM models yet o.O
so that is the next one?
Wait, wait, wait, wait, wait...
They go out of their way to make a RG of a machine that doesn't even have an MG, and then they forget to even give you a sticker for Athrun Zala's ridiculous signature 'compensating for something' horn on the top of each of his gundam's heads? Bandai.... **groans** Better not make some mistake like this with RG Destiny.
Your videos are still real awsum tho :)
thanks for this. coz i got a RG freedom
I have problem snapping the action stand connector to the gundam's groin. Anyone?
How much painting did you have to do for this kit and the RG freedom?
*watches the end*
Oh no you didn't!!!
Could yo do a video on how to build each grade model?
Thanks!
Do you paint your models?
Afrocurl2007 he does paint in the details
Nice review, liked!
How long does it take to build?
Mine took be about 2 and a half hours to put together.
Do u have to paint it
Mmm cake Only need to paint a few parts, like the forehead camera.
it fit on me
JUSTAYCRWAD
Built this last year. Holy crap. This thing is a piece of shit