Hello and thanks for the question. I'm not sure the brand we have (if we recal it might be Oramask) and I see you can get it from Tooltoday - global.toolstoday.com/oracal-oramask-813-stencil-film-12-inch-wide-x-20-foot-long-roll.html I'm assuming you can get similiar product from other sources.
Thanks for the Video. I'm still on 10.5 and looking forward to the update. May I ask what mask you used? I've never had any descent luck with masks. What you used looks good! Thanks!
Not a problem. Ahhhh yes our masks. They are from JSP Professional and are called "Force8 Halfmask with P3 R Press to Check Filters". I hope that helps... :)
Hello and thanks for the question. Yes you are correct... I did not cut all the way through. You can just update the toolpath to do that. I really wanted these holes just for location pourposes and in the real world would need to sort out how I was going to hang or mount the sign and then make the holes the right size and depth. This was really just to demonstrate how to use the toolpath.
( am unable to find the downloadable files mentioned in this video series. I followed the link and it shows the videos, but no files. Can you post a direct link to the downloadable files please.
Hello and thanks for the question. If you goto the video in our Toutorial section - www.vectric.com/support/tutorials/aspire/?playlist=getting-started-with-vectric-software&video=how-to-add-a-clearance-tool-to-your-v-carving - and have a look uneder the video. You should see "Install" and "Download". Give that a try... :)
Where do I buy that protection film? What’s the name of it on Amazon?
Hello and thanks for the question. I'm not sure the brand we have (if we recal it might be Oramask) and I see you can get it from Tooltoday - global.toolstoday.com/oracal-oramask-813-stencil-film-12-inch-wide-x-20-foot-long-roll.html I'm assuming you can get similiar product from other sources.
When I go to video 3 I get video 4
Thank you very much👍👍👍
Thanks!
Thanks for the Video. I'm still on 10.5 and looking forward to the update. May I ask what mask you used? I've never had any descent luck with masks. What you used looks good! Thanks!
Not a problem. Ahhhh yes our masks. They are from JSP Professional and are called "Force8 Halfmask with P3 R Press to Check Filters". I hope that helps... :)
simple question: the drilling toolpath went not all the way dawn 0.455, but only 0.325 I think. So why is that ? kind regards Hans
Hello and thanks for the question. Yes you are correct... I did not cut all the way through. You can just update the toolpath to do that. I really wanted these holes just for location pourposes and in the real world would need to sort out how I was going to hang or mount the sign and then make the holes the right size and depth. This was really just to demonstrate how to use the toolpath.
@@vectric okay thanks
( am unable to find the downloadable files mentioned in this video series. I followed the link and it shows the videos, but no files. Can you post a direct link to the downloadable files please.
Hello and thanks for the question. If you goto the video in our Toutorial section - www.vectric.com/support/tutorials/aspire/?playlist=getting-started-with-vectric-software&video=how-to-add-a-clearance-tool-to-your-v-carving - and have a look uneder the video. You should see "Install" and "Download". Give that a try... :)
Great Vid Tutorial! If you don't mind, what type/brand of CNC machine do you have/ use?
Great video! Lots of great little things to learn in a practical example.
Thank you!
Thanks for the great explanation ♥
You're very welcome! Thank you