Це відео не доступне.
Перепрошуємо.
Can-Am Ryker LED Split Color Front Fender Running Lights
Вставка
- Опубліковано 30 жов 2019
- Ryker Front Fender Running Lights available here: www.slingmods.com/canam-ryker...
We're happy to introduce our TricFenderz LED front fender running light strips for the Can-Am Ryker & Ryker Rally. These LED strips feature a "split" two color layout that have been designed specifically to enhance visibility of your Ryker, so that you're more clearly seen when out on the open road. The front of the lighting strips features a row of white LED's, while the rear of the strip features a row of red LED's. We've also encased the LED strips in a patented smoked flexible tubing so that the strips blend with the black satin panels of the Ryker when the lighting strips are "off". The installation is mostly Plug N' Play and utilizes an OE style connector to integrate with the accessory power port already on board.
I just Installed these on my Ryker 900.took about 1 hour. The Brightness of these lights is unbelievable. They glow and light up the front end.you will not go unnoticed.
Glad you like em' Max! Yeah.. they're super bright.
I'm 🤔 of getting a 2nd set of these lights to put on the outside on the front fender. I love these lights. They add so much life to your ride.
One of my favorite add ONS for my Ryker I highly recommend!!!👍👍👍👍👍 Easy install
already received my order and installed and it look great
Awesome! Glad to hear it!
Been riding with them for a month, love them. I will be adding handguards though, to help deflect the white light interfering with my vision at night.
Right on Puff! Thx for the feedback.
Im going to get the Handguards as well but I sure like these new lights on the front.
Thank you for the video!
Sick
I know some have already asked about using this as a turn signal. In my state, white is legal for a front facing turn signal. If I were to use a splitter and connect this to my a arm lights (purchased from you guys), would it function properly for both a arm lights and these lights? Thanks!
Hello Ryan, it wasn't intended for that... but it could be done using a single color turn signal module similar to what we use on the Spyder F3 side vents. The modules would run $30 for both and would be a custom order. Please let me know and we'll make it happen for you. Thanks!
@@Slingmods Great, thanks for the reply! I'll wait until I receive the kit then decide if I want to make it a turn signal later.
@slingmods can you add the air intake led with these lights also with the 1:4 splitter?
Yes, you can.
This is one of the cleanest looks! Hopefully you guys have more windshield coming as well LOL not a fan of the current one
Hello DJ, we have two more shields coming. Problem visually with the shields is that they need to sit up higher than normal or have a cutout on the bottom side to allow for glove box articulation.
Do these have option to tap into the blinker and brake?
Hello Denver, these are just running lights. We do have an LED "reflector" kit for the front fenders coming soon that will have Turn Signal Functionality. Stay tuned...
A must have for your Ryker, check my Ryker channel
I followed the video and when I got to where you plug into the (I guess) power socket there wasn’t anything plugged in the socket to remove. I used the splitter and plugged it into that empty socket which left one of the splitter wires not plugged into something. It didn’t light up. I double checked all connections but still didn’t work. What is that socket to? I checked the splitter wire with a volt/ohm meter and it is fine. If I use a volt meter and check the socket should I get a voltage reading?
Hello Stick String, our customer service is happy to assist. You can reach us here: www.slingmods.com/index.php?route=information/contact or via phone at 800-211-1396 Mon-Fri 9am-5pm PST!
Nice! But it would be great if it function as a brake light and turning light
Hello Jello, I hear that. We didn't want brake lights up front and turn signals need to be amber in most states. We're coming out with replacement amber LED reflectors for the front fender that will be a turn signal and we have a bunch of brake light LED's coming out for the rear of the bike. Stay tuned...
Slingmods.com /throws wallet
@@xijayix Lol.
Can this be used at the same time with the virticle fender lights, and the scoop lights?
Yes, you can power up to 4 of our LED lighting strips from that accessory power plug with our 1:4 splitter here: www.slingmods.com/canam-ryker-dual-color-led-expansion-kit-tricled If you need to run more than 4.. i'd recommend jumping up to one of our aftermarket fuse blocks.
@@Slingmods Will you be doing an installation video for the Neurino fuse block?
@@dperry7830 Hello DPerry, yes we will. Stay tuned!!!
As the main supplier for mods it would be good to know how to fit these to Australia bikes as they rewire them
Hey Justin, I hear that. We only have U.S. models in the shop. If you don't have the 12V "accessory" power port under the left side fairing like the U.S. models.. you'd simply need to hook these to 12V ignition power and ground for illumination.
@@Slingmods cool
How its the name of that tool that you use to remove the cover?
Hello Johnny, that's a push pin removal tool.
@@Slingmods thanks👍
Do these come in any other colors beside red and white?
Hello Camille, these particular strips do not.. but we do have chaser underglow kits that you can change colors on located here: www.slingmods.com/canam-ryker-underglow-lighting-kits Thank you!
I have this mod installed and it has started flaking out on me. It appears to be the connection between these lights and the splitter. (@3:56 in the video). The lights are sometime on and sometimes off. If you tap the connection you can make the lights go on and off. Is there something I can do to make that connection more stable?
Hello Mike, are you referring to the Y splitter used to tap off the bikes accessory 12v power? Can you shoot us a quick video of what you're experiencing and send it to our support team. The support page is located here: www.slingmods.com/index.php?route=information/contact&vehicle=4 We may need to get you out a replacement Y splitter. Please also check that you don't have any corrosion build up at the connection points.. that will cause a loss in continuity.
@@Slingmods Thank you for the quick response. I have already submitted an email through your support page for this issue on Saturday 11/28/20. I'm waiting to hear back. I have checked for corrosion . . . everything looks fine.
I did create a video as requested. Once I hear back from support, I can send them the link.
Or it can be accessed here: ua-cam.com/video/wfQR5U1-w5I/v-deo.html
Thank you for an assistance you can provide.
@@mikeyuberalles Okay cool. Thanks Mike. We'll get this handled for you.
This day compatible with 2022 but they don’t align well due to guards. I may need to take mine off
Hello Desma, do you have 2022 Rally Model? We have a shorter version available for that bike.
Do I need the 1:4 expansion kit if I only want to also install the underseat LED strip lights?
Hello Devin, no you do not. The Under Seat LED Lighting pulls power off the rear tail lights. Here's the install video for that: ua-cam.com/video/TnikQLKt0xA/v-deo.html
Also is there a way to make the work with turn signals and brake lights?
@@devinmonteiro4667 Hello Devin, no there is not.
That would dope if you guys can figure out how to add that in
@@devinmonteiro4667 We're actually doing a version with integrated turn signals this year. There won't be brake lights though as the brake light should not be in front of the rider.
Does that only come in red and white?
Hello William, that is correct. This product is only available with forward facing white LED's and rear facing red LED's. Thanks!
@@Slingmods not to bother, will it eventually come in other colors?
@@williamperez5537 Not a bother William! This particular product will not.. but we do have Chaser RGB Underglow kits that will illuminate the underbelly of the beast in any color you want.
@@Slingmods that sounds cool. Send me a link if possible. Thanks!
@@williamperez5537 Hello William, we're still working on the RGB underglow kits.. but we'll be sure to do a video install on these kits once ready for market. Thank you for your interest sir.
Just wondering, all of your light mods, can they all be used on the same bike without causing issues with each other?
Hello Michael, yes.. you can run up to 4 of our LED dual color running light strips off the accessory power plug located under the top left side fairing. We actually have a 1:4 power splitter to accommodate this here: www.slingmods.com/canam-ryker-dual-color-led-expansion-kit-tricled If you need to run more than that, you'd need to grab one of our aftermarket fuse blocks.
Have you guys thought about making plug and play underbody neons for the can am ryker? They’d sell like hot cakes
Yes sir.. those are in the works. We'll have a full underbody "chaser" light kit that will be available early 2020.