Very nice do you have individually Plug and Play harness itself for the back brake lights to add additional brake lights I'm trying to find a pair for left and right thank you
Wish they were brighter. When are you gonna do a center light under max mount with brake and flasher functions like the one from New Rage Cycles? Some of us bought these for a full fender delete and that last light between these lights would be dope.
Was told about a kenitic brake switch, where if you let off the throttle alot or let go on accident it flashs your brake light do you have or know about this product ?
I'm having trouble understanding why we have all that extra line running up the swing arm that's not connected electrically to anything at the front. Why have all that extra wire? Where did you connect it to up there? I'm electrically challenged so forgive me if this is a stupid question. I bought this set but that part makes no sense to me if it's wired in the back only.
Hello Heather, you are correct in that the electrical connections are made at the rear of the bike. The harnesses you're running up to the underside of the max mount are connected to the light strips themselves. So you connect at the rear and run the wires connected to the lights strips up along the swing arm to the underside of the max mount. Be sure that all your wiring is ziptied out of the way of any moving parts. Hope that made sense. Thank you!
@@Slingmods definitely. Thank you. Had a senior moment there haha. Apparently I didn't pay good enough attention to the video. When we installed it a bit ago it made sense. Appreciate the response back!
shame its costs a fortune to ship all this stuff to the UK....there is loads of UK ryker owners like myself that want slingmods stuff but its just too expensive in import taxes.....
🛒 Ryker LED Underseat Lighting available here: www.slingmods.com/can-am-ryker-underseat-run-brake-turn-signal-led-kit-tricled
Just installed them on my wife’s 2022 Ryker Rally
Great product, I just launched the first 3 wheel podcast would love to have you guys on
That would be aweaome!
Another well informative video. Thanks
Bravo pour la présentation intéressante. Vous respectez tout vos clients et respectez tout vos commandes à l’internationale ....?😊
Looks amazing 👏
Very nice do you have individually Plug and Play harness itself for the back brake lights to add additional brake lights I'm trying to find a pair for left and right thank you
Hello Chris, here's all the Brake Light products we currently have available for the Ryker: www.slingmods.com/canam-ryker-brake-lights Thank you!
Wish they were brighter.
When are you gonna do a center light under max mount with brake and flasher functions like the one from New Rage Cycles? Some of us bought these for a full fender delete and that last light between these lights would be dope.
That's on the project list. Thanks for the feedback.
hello all right is it possible for this light to come on like you are when you are in a park plates can you leak a video
Would these work and necessary it you have the three piece luggage system?
Does this kit come with that grease that you say to put in the connections?
Hello Max, it doesn't come with it.. but we do offer a mini tube of dielectric grease here: www.slingmods.com/dielectric-grease-pillow-pack-single-use
Was told about a kenitic brake switch, where if you let off the throttle alot or let go on accident it flashs your brake light do you have or know about this product ?
Hello Jeff, we are going to be launching a "helmet" brake light that functions that way.
Will this also work with the LED reflector center and side marker lights?
Also, would I need to purchase the 4:1 adapter or will they daisy chain into each other?
@@dperry7830 Yes, this will work with both the Side and Rear Center LED Reflectors. They will daisy chain with one another.
Any chance you could modify these and remove the blinking feature? I cannot use red ligh for blinkers here in EU.
Hello Andreas, unfortunately not... because the 3-pin plug we use provides ground, running and turn signal functionality all in one plug.
I'm having trouble understanding why we have all that extra line running up the swing arm that's not connected electrically to anything at the front. Why have all that extra wire? Where did you connect it to up there? I'm electrically challenged so forgive me if this is a stupid question. I bought this set but that part makes no sense to me if it's wired in the back only.
Hello Heather, you are correct in that the electrical connections are made at the rear of the bike. The harnesses you're running up to the underside of the max mount are connected to the light strips themselves. So you connect at the rear and run the wires connected to the lights strips up along the swing arm to the underside of the max mount. Be sure that all your wiring is ziptied out of the way of any moving parts. Hope that made sense. Thank you!
@@Slingmods definitely. Thank you. Had a senior moment there haha. Apparently I didn't pay good enough attention to the video. When we installed it a bit ago it made sense. Appreciate the response back!
@@heatheronwheels Ah.. Lol. No problem at all. Glad you got it worked out. Thank you!
Will these fit along with the brake light flashers that I purchased?
Hello, yes they will!
Do you guys also make these in 6-7" lengths?
Hello Raavit, not currently. What part of the bike are you wanting to accent?
Will this work with a passenger seat added?
Hello K.C., yes this is compatible with the passenger seat installed.
I think they sent me the wrong cords. Smh
Hello Travis, our customer service team is standing by if you need assistance here: www.slingmods.com/index.php?route=information/contact
shame its costs a fortune to ship all this stuff to the UK....there is loads of UK ryker owners like myself that want slingmods stuff but its just too expensive in import taxes.....
I hear ya Peter. I wish the international shipping costs were cheaper as well.
I will be adding this to my Ryker, check my channel