Thanks for your service. 50 years ago I started out in 101st then went to work for another agency. Carried a Gerber MKII but decided it was to fragile. Carried a model 14 Randell after that and never looked back. I also believe hand made are the way to go and have several for different tasks.
Good choices. I had an ole Ka-Bar in the military in the early 80's. My Gerber mark II was one of my favorites. I enjoy your channel. Been making knives since 80's, 1 at a time, just for my buddies. Note: don't keep your knives in your sheath. Store outside sheath with a little oil over the blade. Since leather is cured with many different chems, the leather sheath can leave deposits on the steel.
I can't run right now but I will one day again. It is great to see you guys running in the opening of your show. I have a good friend that is a Navy SEAL and he inspires me to continue to progress toward running. And so do you Chadd! Good luck with your show here!
My father-in-law was a Marine during World War Two, lied about his age to get in. He was in the Marshal Islands. He remarked to me once that he would like to have another K-Bar to use around his country homeplace and that is what I gave him for Christmas that year. We were setting on the couch at the family Christmas gathering and he leaned close to me, turning the knife over in his hands and in a subdued voice said, "A lot of Japs were done in with these". He and I really got along together, and I really respected him by taking care of his daughter and giving her the best life I could. He passed away in 2006.
Thanks Chadd. I love quality knives and other cutting tools. Thanks man for this video and for everything you've done for our great country. Keep it up!!!
I love knives. I’ve got a Winkler Blue Ridge Hunter that I got a chance to use on a hog last hunting season. I also have a Tops Tex Creek. I haven’t broken that one in yet. I enjoy your videos.
Thanks Mr Chad! I run an EK Commando, wasp waist, handmade knife. Probably one of the very last he made. Buy once, cry once! I also have assorted case fixed blade, Buck fixed blade, Case marine corps kabar, Ontario kabar, Cold Steel Leatherneck, and for general purpose a good Mora knife.
I've got a Winkler knife and I love it. I'll have one of Hatchett. They are definitely a work of art. My EDC Is usually a Benchmade or a GOOD Spyderco. Not one of their cheaper offerings. Brother, you do a great job and I look forward to your new videos.
Bark River and Esee are my go to for Hard Usage Blades . 1095 and CPM 3V is my go too for blade steel for hard usage . Bark River Bravo 1 CPM 3V and Esee 4 1095 are my 2 favorite. I also have Gransfor Bruk Small Forest Axe and Outdoor Axe . I've tried a lot different smaller axes / hatchets over the years . I've never broke Gransfors. If someone is in the market for an Axe . Cold Steel TrailBoss are freaking bomb Proof and best bang for your buck . Unfortunately when I comes to smaller axes or Hatchets. Gransfor is the only one I trust . There could be better ones out there for the TACTICAL usages . I just have no need for them
I still have my Uncle Henry knife since the mid 80s that I used deep in the jungle and now I still use it in the forest here in the US. Still going strong.
I've been a knife junkie for years. Some of my favorite hand made knives are my SERE Puukko, Instructor, and tomahawk from HoboForge Survival. Jason is a former Army SMU Medic and Survival instructor that makes some incredible knives. I've been staring at Winklers for years, the jump in price always makes me hold off.
Very nice video 👍 I suggest making a video at some point where you talk about your favorite knife sharpening tools and the methods that you use. That would be interesting and informative. Thanks for your work!
Oh man you got new ink, cool. That winkler is sexy looks good with the beard too, lol. But Lord the price I think is around $800.00 I love custom knives but can't really afford them, my BK2 knife has been through a lot 1095 high carbon steel I'd say close to 1/4 inch thick great size for just about anything. And my mora for small chores can't beat that scandi grind just super easy to maintain. Sharpening has never been a strong suit of mine but scandi makes it easy to get shave sharp, and the price everyone should have a few in every bag, or truck. I like the Gray man knives I think the owner served and then worked for Tops knives at one point. Thank you for your time as always I picked up a few of the books you recommended, so thank you again.
I think the Shay Butler knife is the ideal size for general use and I prefer a blade that holds an edge over a soft, easy to sharpen, blade. That really looks like a great knife.
I have a fair collection that started from using it to overcome an attack. They are works of art I have learned over the years. I agree custom knives are worth the $ but I use them also. AMTAC and Toor knives / hatchet are my go to’s
Thanks for the vid, Chadd! A Cold Steel SRK (Carbon V) has been my companion for about 30 years. The OE Cordura sheath is shite, so I replaced that with a SpecOPs Combat Master. My EDC fixed blade is a Morakniv Pro Robust, modified by Baryonyx Knife Co. to a full flat grind. It's carried in a custom Kydex IWB sheath. I also EDC a Leatherman CORE.
I enjoyed your vid Sir! I am a now retired Knife Maker with over 47 years in the4 Craft. The Ax you show if anyone is curious is a Winkler Combat Axe - Tribal Maple Handle Tomahawk. He is a well known and respected of the Knife Making community. KnifeMaker/Retired. s
Thank you for the knife video Chadd. I'm a big knife guy. The best folder ive ever carried is an Emerson Super CQC 7. But I do have a small collection of other brands. Love that Benchmade fixed blade you show us in the video. I agree, id rather have a good chopping knife with a long blade than a axe or tomahawk. Thank you for sharing your experience and expertise with us!
It seems u can buy the Standart Ka Bar Navy Seal Edition. The newer one are same stamped with Ka Bar, same brown Leather with the Trident, made in 1095 Carbon Steel in Olean, New York. Only difference the Word US Navy is in Full, yours has only the USN- and of Course the Ingravings. They made some Special Editions for the Troops like yours and that make yours of course to a very special, unique Collector Knive.
Great Channel Chad Totally agree with your assesment regarding custom v mass production knives. I have supported The Knifemakers Guild for many years and have an excellent collection of both catagories. I have found the Gerber LMF to be an excellent choice for the rigors of being a valuable tool without a huge investment. It has many features suitable for survival and tactical applications. A heavy blade is substantial for batoning, holds an edge and the MOLLE compatible sheath ha s a built in sharpener. The LMF also has holes for lashing to convert it to a spear. A glass breaker pommel makes it useful in an urban environment. The best of everything..practical, durable and affordable. Nuf said !
I only discovered Winkler's art recently but I've become completely obsessed with the axes. I hope one day soon I can win the lottery and be able to afford one of these magnificent pieces of art.
With what I spent on knives and tomahawks over the years I really should have just saved the money and 'buy once cry once' with the higher price gear I've always sought after. I just got a CRK Pacific which was a knife I've been after for years but the Winkler Combat Axe and RMJ Shrike are next on my list of dream pieces.
Your kbar, depending on age, is made of 1095, on older blades, and 1095 cro van on the newer blades. Both are high carbon steel with little to no stainless property’s. Though not as strong as some of the newer survival knives of today, due to thinness and having a stick tang, they can take more abuse than one would think. Thank you for your service, and trim the beard sailer! Lol
Doesn't even have to cost big $. Made a 3.75" from a Nicholson file, draw tempered it back from brittle. Recently used a 1-1/2# mallet to cross baton through a 4" pine branch. Besides a few dings in the spine, it out performed what I'd ever expected!
I have a very nice custom made knife by Bill Rapier of Amtac Blades. In fact I just ordered a second knife from him with a slightly longer handle. I’m going to look into that Shay Butler knife you showcased here. Looks great.
I would like to find and get my hands on and learn more about all this wonderful knives you folks are talking about I've been using the AMERICAN Buck knives for years kitchen indoor outdoor ,hunting fishing Field & stream all needs they cover very well on a daily basis! Go America!!! Have been watching and preciate all the videos for quite a while
I have a bunch of fixed blade combat and utility knives. Busse Combat Team Gemini Light Brigade in INFI steel being my most favorite followed by Cold Steel SRK, Cold Steel RECON Tanto, Cold Steel Trailmaster in San Mai III, ESEE-6, ESEE -4, Chris Reeve Green Beret, KA-BAR 1942, Gerber Mk II, EK Commando daggers, SOG 5th Special Forces Bowie, Chuck Hawes Custom Damascus San Mai III bowie etc etc.
I own two of the Marc Lee Glory knives, long story. I carry one of them with a Hardcore LFT-01 anytime I go bush side. They have never let me down. My Kabar stays at home hung behind the bar beside the other Glory knife. I like the content you're making Chadd. Think I'll hang out for awhile if you don't mind?
I like the hatchet, but like you clearly pointed out, not much blade surface. I bought a pair of Cold Steel La Fontana throwing KUKRIs. I like the weighted forward blade, thick 1/4" spine and full tang. Making Zebrawood shingles for them, one to be a matching gift for my Son. Maybe a good folding saw would be a suitable replacement for the Hatchet? Makes less noise too!
For high-end blades; Rustick and Winkler have quickly become my favorites over the past 5 years or so. For EDC; CRKT and Kershaw. Multi-tools; Gerber and Leatherman.
ESEE knives made here in the USA. Life time warranty on the blade if it’s broken. I have cleaned a lot of deer and beat the crap out on my esee4. It’s the handles I really look at.
I've become a fan of Spartan Blades lately I started with Tu Lam's folding karambit and have both of their Fairbairn Sykes inspired offerings. Some of my friends and associates think I'm a bit insane.
Hey Chadd, I have a few knives of varying types & lengths (and continue to grow my collection as able). I have a SOG Seal FX (custom engraved) that is fairly solid, though I have read a few articles/reviews on durability of past knives. I also have a CRKT knife (fixed blade EDC; 3.5" blade that is solid & comfortable). Waiting for Grizzly Forge & MKC to restock... :) One other thing that is, IMHO, crucial is having a GOOD sharpening stone & lubricating oil. Without that, your blade will just be a dull, useless piece of metal at some point! Fair winds...
I managed to get my hands on a Case Winkler Skinner here in Germany. Unfortunately, it has the G10 scales and not the wooden ones but anyway. It's discontinued for a long time so beggars can't be choosers. :D I like its classic blade design. It should arrive tomorrow and I'm quite excited. After ordering it, I called Jürgen Schanz, one of our most famous German knifemakers. He can easily replace the scales for wooden ones professionally, he said. I'd never go cheap here. I might do that because wooden scales match the blade's design best. It's so classic :)
I found a great bushcraft knife in the Colonial Knives Defiant CE-400. The knife is made of 154cm SS with a full tang and is fairly easy to sharpen. The knife was designed by Abe Elias and is made in the USA. The knife is currently selling for $149 but, has been on sale for $120. Check out the company's demonstration video on UA-cam it is impressive! The knife is great for survival. I also, use a Buck 119 and a Mora 2000 for camping, kayaking and paddle boarding. The Mora is my favorite lightweight fixed blade knife but, the Defiant is my best full tang knife that I don't worry about breaking. I have other knives but, these are my two go to knives.
Fine collection. I have a Benchmade Adamas fixed. It is a great knife. Holds an edge well. My favorite or go to is my Swamp Rat (busse knife works)rodent 6. It is a beast. The spine is a tad over one quarter inch thick. Busse utilizes their own proprietary steel. SR101. Tool steel and a special tempering process.
Good info. Thanks for sharing some of your blades. I see it's getting cooler where you're at too by the flannel shirt and long pants. Loving me some cool weather and your videos. Thank you.
I keep an explorer wilderness 1 in my go bag had it forever 440 stainless steel she is tough. I really dig that axe you have she sure has style so you look cool chopping stuff! lol
Old school buck knife takes care of all my city COMBAT needs like ... digging a splitter out of my finger... dealing with FedEx boxes ...cutting weekender string cause the thingy broke off ... y'all have a good one ... I got to go get this stuff dealt with...🪓🗡
Try Half Face Blades. Great Custom maker of knives and hatchets. Made by Retired Navy Seal. I EDC 1 and depend on it daily. Great Video..Semper Fortis 🇺🇸⚓
absolute works of art are what you can find in old (1300-1500 time frame) katana blades in japan. I have never seen such beautiful weapons as what they made so many years ago...
Nice style considerations overview. Thanks. I have a few handmade and agree that buy once, cry once is the better value in the long run. I recently got a TKell knife. He’s is an excellent handmade blade maker with a life of the blade guarantee. worth a look.
My Company Commander in Boot Camp was a GM. On day one he explained to us that “A Gunner’s Mate is just a Bosun’s Mate with a license to kill.” GMG 1 Carmody. Never forgot.
I like esee and tops knives for decent production knives and they’re made of a decent steel. I’ve been getting into the custom knives as of late and Bear Forest Knives makes really good one for the momey
I have been a knife freak since childhood and have well over a hundred, maybe two, Most expensive my Randall. I still have my K-Bar from my time in the USMC 1964-68. I agree, good handmade knives are dependable.
I absolutely love the content thank you for that. Thank you for your prior service as well. I thank you and my family thanks you. I have a winkler neck knife that I absolutely love.
They test the Ka-Bar knives by hammering them a couple of inches into a wood post and then grab it by the handle and push and pull on it. It is plenty good for prying. My favorite camp knife, albeit a bit large for fine tasks.
@3of7 check out William Collins knives. I've used them for years. Has a unique multi grind blade. Scandi at rear for wood working camp stuff. Front part is usually flat or saber grind. Handmade knives. I buy my through Great Northern Knives of Alaska. Ask for Jeff.
I've been impressed by the quality and durability of heavy duty knives by Condor Tool. But like you I have a LOT of different knives. It is like the ultimate quest to find the perfect knife.... If I'm going to be out in the woods, I have found a small folding saw to be extremely helpful and cuts down on the amount of chopping required of my knives or axe. I also ALWAYS carry a whetstone that I use on my tools whenever I have used them, or I'm about to use them, or I'm thinking of using them, or after every meal, whenever I brush my teeth.
Great video my friend. Subbed. My favorite survival knives are made by Survive Knives. The GSO series. My favorite woods/bush craft knives are made by Bark River. Specifically the bravo one or 1.25. Also the Bark River Aurora. The features I really like on the Bark River‘s are their wonderful ergonomic handles. Thank you for you comment and service to our country. I hope and pray that they weren’t in vain! God bless you. John
I have a Bark River "Gunny" which I believe is a nice hiking knife that can handle some camping/bushcraft tasks but its not too imposing to carry horizontal or vertical on your belt. Not too heavy but durable as well. Just my inexperienced 2 cents.
Lots of good knives out there , I like K Bar the BK 9 also the Ontario Marine Raider. I have many good knives but I use a Lanski machete with a Gukara style blade and I've turned trees into firewood it's a excellent working blade.
I used to teach wilderness survival and safe knife use, back in the early 80's. Long before chopping and batonning with a knife was even a thing. So I will never baton with a knife. I have some good Tomahawks for that. Right tool for the job. And yes when I'm back packing, I carry at least three knives, a small folding saw, and a tomahawk. Most likely the Hudson Bay Hawk, from Cold steel.
Thank you sir I watched you on the bear podcast I am an old beaten down Grunt your very words have changed my life God bless you sir 🫡your new subscriber mike
love a good knife. i've got a daniel winkler hunting knife (no longer made, i think). the quality is felt right out of the box. shay's knives are badass as well.
That Kabar is made out of 1095 carbon steel. It's coated to prevent it from corrosion. I have approximately 140 knives between folders, fixed blade, and OTF's.
Thanks for your service. 50 years ago I started out in 101st then went to work for another agency. Carried a Gerber MKII but decided it was to fragile. Carried a model 14 Randell after that and never looked back. I also believe hand made are the way to go and have several for different tasks.
Good choices. I had an ole Ka-Bar in the military in the early 80's. My Gerber mark II was one of my favorites. I enjoy your channel. Been making knives since 80's, 1 at a time, just for my buddies. Note: don't keep your knives in your sheath. Store outside sheath with a little oil over the blade. Since leather is cured with many different chems, the leather sheath can leave deposits on the steel.
I can't run right now but I will one day again. It is great to see you guys running in the opening of your show. I have a good friend that is a Navy SEAL and he inspires me to continue to progress toward running. And so do you Chadd! Good luck with your show here!
My father-in-law was a Marine during World War Two, lied about his age to get in. He was in the Marshal Islands. He remarked to me once that he would like to have another K-Bar to use around his country homeplace and that is what I gave him for Christmas that year. We were setting on the couch at the family Christmas gathering and he leaned close to me, turning the knife over in his hands and in a subdued voice said, "A lot of Japs were done in with these". He and I really got along together, and I really respected him by taking care of his daughter and giving her the best life I could. He passed away in 2006.
I have my late father in law’s Kabar. He was in the honor guard assigned to President Kennedy. I’m honored to have received it.
@Garrett Pierman 🤣
@Garrett Pierman what a stupid thing to say. His FIL was a Marine, not Secret Service.
Thats cool asf
Awesome to see how much the channel has progressed brother. You guys are doing good work.
I have many knives but some of my favorites I own are Winkler, Medford, Spartan, Grayman, and TKell. A good blade is very useful.
Thanks Chadd. I love quality knives and other cutting tools. Thanks man for this video and for everything you've done for our great country. Keep it up!!!
We always carried some sort of knife with us. School, church, picnics and of course Boy Scouts as youngsters.
Still EDC a sharp folder.
I love knives. I’ve got a Winkler Blue Ridge Hunter that I got a chance to use on a hog last hunting season. I also have a Tops Tex Creek. I haven’t broken that one in yet. I enjoy your videos.
Thanks Mr Chad!
I run an EK Commando, wasp waist, handmade knife. Probably one of the very last he made. Buy once, cry once!
I also have assorted case fixed blade, Buck fixed blade, Case marine corps kabar, Ontario kabar, Cold Steel Leatherneck, and for general purpose a good Mora knife.
I'm an idiot for letting my Ek SF3 get away. (face palm)
I went with the Spartan Blades Ares knife. After meeting the Mark & Curtis also at a knife expo. a great company and amazing knives.
My Daily carry is a Spartan Blades folder, awesome knife!
I've got a Winkler knife and I love it. I'll have one of Hatchett. They are definitely a work of art. My EDC Is usually a Benchmade or a GOOD Spyderco. Not one of their cheaper offerings. Brother, you do a great job and I look forward to your new videos.
Bark River and Esee are my go to for Hard Usage Blades . 1095 and CPM 3V is my go too for blade steel for hard usage .
Bark River Bravo 1 CPM 3V and Esee 4 1095 are my 2 favorite. I also have Gransfor Bruk Small Forest Axe and Outdoor Axe .
I've tried a lot different smaller axes / hatchets over the years . I've never broke Gransfors.
If someone is in the market for an Axe . Cold Steel TrailBoss are freaking bomb Proof and best bang for your buck . Unfortunately when I comes to smaller axes or Hatchets. Gransfor is the only one I trust . There could be better ones out there for the TACTICAL usages . I just have no need for them
I still have my Uncle Henry knife since the mid 80s that I used deep in the jungle and now I still use it in the forest here in the US.
Still going strong.
That winkler axe is awesome!
I've been a knife junkie for years. Some of my favorite hand made knives are my SERE Puukko, Instructor, and tomahawk from HoboForge Survival. Jason is a former Army SMU Medic and Survival instructor that makes some incredible knives. I've been staring at Winklers for years, the jump in price always makes me hold off.
Very nice video 👍 I suggest making a video at some point where you talk about your favorite knife sharpening tools and the methods that you use. That would be interesting and informative. Thanks for your work!
This
Oh man you got new ink, cool.
That winkler is sexy looks good with the beard too, lol. But Lord the price I think is around $800.00
I love custom knives but can't really afford them, my BK2 knife has been through a lot 1095 high carbon steel I'd say close to 1/4 inch thick great size for just about anything. And my mora for small chores can't beat that scandi grind just super easy to maintain. Sharpening has never been a strong suit of mine but scandi makes it easy to get shave sharp, and the price everyone should have a few in every bag, or truck.
I like the Gray man knives I think the owner served and then worked for Tops knives at one point.
Thank you for your time as always I picked up a few of the books you recommended, so thank you again.
I think the Shay Butler knife is the ideal size for general use and I prefer a blade that holds an edge over a soft, easy to sharpen, blade. That really looks like a great knife.
First, Thank You for your service.
Second, Cold steel. High quality, reasonable price, extensive product line. My edc is xl voyager.
I have a fair collection that started from using it to overcome an attack. They are works of art I have learned over the years. I agree custom knives are worth the $ but I use them also. AMTAC and Toor knives / hatchet are my go to’s
Thanks for the vid, Chadd! A Cold Steel SRK (Carbon V) has been my companion for about 30 years. The OE Cordura sheath is shite, so I replaced that with a SpecOPs Combat Master. My EDC fixed blade is a Morakniv Pro Robust, modified by Baryonyx Knife Co. to a full flat grind. It's carried in a custom Kydex IWB sheath. I also EDC a Leatherman CORE.
I enjoyed your vid Sir! I am a now retired Knife Maker with over 47 years in the4 Craft. The Ax you show if anyone is curious is a
Winkler Combat Axe - Tribal Maple Handle Tomahawk. He is a well known and respected of the Knife Making community.
KnifeMaker/Retired. s
I’m a Benchmade guy. Love em. My 940, Mini Griptilian and Bugout rotate as my EDC.
Half Face Blades are hard to beat but they aint cheap, Semper Sharp also is amazing. Dull boy makes some quality pieces.
Another vote for a beautiful tool, Andy and crew do amazing work.
Thank you for the knife video Chadd. I'm a big knife guy. The best folder ive ever carried is an Emerson Super CQC 7. But I do have a small collection of other brands. Love that Benchmade fixed blade you show us in the video. I agree, id rather have a good chopping knife with a long blade than a axe or tomahawk. Thank you for sharing your experience and expertise with us!
CQC 7 with the wave feature here. Love it.
It seems u can buy the Standart Ka Bar Navy Seal Edition. The newer one are same stamped with Ka Bar, same brown Leather with the Trident, made in 1095 Carbon Steel in Olean, New York. Only difference the Word US Navy is in Full, yours has only the USN- and of Course the Ingravings. They made some Special Editions for the Troops like yours and that make yours of course to a very special, unique Collector Knive.
Great Channel Chad
Totally agree with your assesment regarding custom v mass production knives. I have supported The Knifemakers Guild for many years and have an excellent collection of both catagories.
I have found the Gerber LMF to be an excellent choice for the rigors of being a valuable tool without a huge investment.
It has many features suitable for survival and tactical applications. A heavy blade is substantial for batoning, holds an edge and the MOLLE compatible sheath ha s a built in sharpener. The LMF also has holes for lashing to convert it to a spear. A glass breaker pommel makes it useful in an urban environment. The best of everything..practical, durable and affordable.
Nuf said !
I have two Sig Hogues and I also love my Esee knives. Also have a couple of Tops Operators.
I only discovered Winkler's art recently but I've become completely obsessed with the axes. I hope one day soon I can win the lottery and be able to afford one of these magnificent pieces of art.
With what I spent on knives and tomahawks over the years I really should have just saved the money and 'buy once cry once' with the higher price gear I've always sought after. I just got a CRK Pacific which was a knife I've been after for years but the Winkler Combat Axe and RMJ Shrike are next on my list of dream pieces.
Your kbar, depending on age, is made of 1095, on older blades, and 1095 cro van on the newer blades. Both are high carbon steel with little to no stainless property’s.
Though not as strong as some of the newer survival knives of today, due to thinness and having a stick tang, they can take more abuse than one would think.
Thank you for your service, and trim the beard sailer! Lol
I have edc'd a tops tom brown scout for years and almost feel naked without it
Its a small blade but very thick , the grip is amazing and
Dawson Custom makes great knives. I like the older ones that Barry and Lynn made. Extremely tough, durable knives.
12 year Army vet, 5 blades I can’t do without: Gerber MKII, Cold Steel Fixed Spade, Microtech Dirac Delta, Benchmade SOCP Dagger and Buck 120
Doesn't even have to cost big $. Made a 3.75" from a Nicholson file, draw tempered it back from brittle. Recently used a 1-1/2# mallet to cross baton through a 4" pine branch. Besides a few dings in the spine, it out performed what I'd ever expected!
That K-Bar gave me the chills, great knife
I have a very nice custom made knife by Bill Rapier of Amtac Blades. In fact I just ordered a second knife from him with a slightly longer handle. I’m going to look into that Shay Butler knife you showcased here. Looks great.
I would like to find and get my hands on and learn more about all this wonderful knives you folks are talking about I've been using the AMERICAN Buck knives for years kitchen indoor outdoor ,hunting fishing Field & stream all needs they cover very well on a daily basis! Go America!!!
Have been watching and preciate all the videos for quite a while
I've got a couple Benchmade's and love them. One bugout and a Mini Griptilian. I rotate these in my EDC. Great video on considerations.
I have a bunch of fixed blade combat and utility knives. Busse Combat Team Gemini Light Brigade in INFI steel being my most favorite followed by Cold Steel SRK, Cold Steel RECON Tanto, Cold Steel Trailmaster in San Mai III, ESEE-6, ESEE -4, Chris Reeve Green Beret, KA-BAR 1942, Gerber Mk II, EK Commando daggers, SOG 5th Special Forces Bowie, Chuck Hawes Custom Damascus San Mai III bowie etc etc.
I own two of the Marc Lee Glory knives, long story. I carry one of them with a Hardcore LFT-01 anytime I go bush side. They have never let me down. My Kabar stays at home hung behind the bar beside the other Glory knife. I like the content you're making Chadd. Think I'll hang out for awhile if you don't mind?
I like the hatchet, but like you clearly pointed out, not much blade surface. I bought a pair of Cold Steel La Fontana throwing KUKRIs. I like the weighted forward blade, thick 1/4" spine and full tang. Making Zebrawood shingles for them, one to be a matching gift for my Son. Maybe a good folding saw would be a suitable replacement for the Hatchet? Makes less noise too!
For high-end blades; Rustick and Winkler have quickly become my favorites over the past 5 years or so.
For EDC; CRKT and Kershaw.
Multi-tools; Gerber and Leatherman.
ESEE knives made here in the USA. Life time warranty on the blade if it’s broken. I have cleaned a lot of deer and beat the crap out on my esee4. It’s the handles I really look at.
I've become a fan of Spartan Blades lately I started with Tu Lam's folding karambit and have both of their Fairbairn Sykes inspired offerings. Some of my friends and associates think I'm a bit insane.
The Glock model 81 survival knife is usually available under $40, and has been shown to be very tough.
Nice chair btw.
Blades are awesome!
"Do not buy cheap knives.."
Roger that!
Hey Chadd, I have a few knives of varying types & lengths (and continue to grow my collection as able). I have a SOG Seal FX (custom engraved) that is fairly solid, though I have read a few articles/reviews on durability of past knives. I also have a CRKT knife (fixed blade EDC; 3.5" blade that is solid & comfortable). Waiting for Grizzly Forge & MKC to restock... :)
One other thing that is, IMHO, crucial is having a GOOD sharpening stone & lubricating oil. Without that, your blade will just be a dull, useless piece of metal at some point!
Fair winds...
I managed to get my hands on a Case Winkler Skinner here in Germany. Unfortunately, it has the G10 scales and not the wooden ones but anyway. It's discontinued for a long time so beggars can't be choosers. :D I like its classic blade design. It should arrive tomorrow and I'm quite excited. After ordering it, I called Jürgen Schanz, one of our most famous German knifemakers. He can easily replace the scales for wooden ones professionally, he said. I'd never go cheap here. I might do that because wooden scales match the blade's design best. It's so classic :)
I like that tang stamp on the Shay Butler knife,. It looks vaguely familiar.
nice collection bro, i have a winkler blueridge and lionsteel m5... thanks you for your service. i enjoy the channel
I found a great bushcraft knife in the Colonial Knives Defiant CE-400. The knife is made of 154cm SS with a full tang and is fairly easy to sharpen. The knife was designed by Abe Elias and is made in the USA. The knife is currently selling for $149 but, has been on sale for $120. Check out the company's demonstration video on UA-cam it is impressive! The knife is great for survival. I also, use a Buck 119 and a Mora 2000 for camping, kayaking and paddle boarding. The Mora is my favorite lightweight fixed blade knife but, the Defiant is my best full tang knife that I don't worry about breaking. I have other knives but, these are my two go to knives.
yeah brother, I really like cpms30v, or 90, kershaw blur edc
I love Microtech, Chris Reeve, Greg Lightfoot, Rockstead knives. 🔪🗡
Fine collection. I have a Benchmade Adamas fixed. It is a great knife. Holds an edge well. My favorite or go to is my Swamp Rat (busse knife works)rodent 6. It is a beast. The spine is a tad over one quarter inch thick. Busse utilizes their own proprietary steel. SR101. Tool steel and a special tempering process.
Good info. Thanks for sharing some of your blades. I see it's getting cooler where you're at too by the flannel shirt and long pants. Loving me some cool weather and your videos.
Thank you.
I keep an explorer wilderness 1 in my go bag had it forever 440 stainless steel she is tough. I really dig that axe you have she sure has style so you look cool chopping stuff! lol
Awesome content.
Greetings from South-Africa.
Old school buck knife takes care of all my city COMBAT needs like ... digging a splitter out of my finger... dealing with FedEx boxes ...cutting weekender string cause the thingy broke off ... y'all have a good one ... I got to go get this stuff dealt with...🪓🗡
Try Half Face Blades. Great Custom maker of knives and hatchets. Made by Retired Navy Seal. I EDC 1 and depend on it daily. Great Video..Semper Fortis 🇺🇸⚓
absolute works of art are what you can find in old (1300-1500 time frame) katana blades in japan. I have never seen such beautiful weapons as what they made so many years ago...
Nice style considerations overview. Thanks. I have a few handmade and agree that buy once, cry once is the better value in the long run. I recently got a TKell knife. He’s is an excellent handmade blade maker with a life of the blade guarantee. worth a look.
My axe of choice is the estwing riggers axe (E 3R) with the milled hammer face.
My Company Commander in Boot Camp was a GM. On day one he explained to us that “A Gunner’s Mate is just a Bosun’s Mate with a license to kill.” GMG 1 Carmody. Never forgot.
I like esee and tops knives for decent production knives and they’re made of a decent steel. I’ve been getting into the custom knives as of late and Bear Forest Knives makes really good one for the momey
I as well have the benchmade knife, its referred to as the Glory knife, and steel is solid 154cm.
I have been a knife freak since childhood and have well over a hundred, maybe two, Most expensive my Randall. I still have my K-Bar from my time in the USMC 1964-68. I agree, good handmade knives are dependable.
Good morning from Arizona. Thanks for another great video.
I absolutely love the content thank you for that. Thank you for your prior service as well. I thank you and my family thanks you. I have a winkler neck knife that I absolutely love.
Half face blades are works of art. I also like winkler knives, Esee and Ethan Becker knives sir.😊
They test the Ka-Bar knives by hammering them a couple of inches into a wood post and then grab it by the handle and push and pull on it. It is plenty good for prying. My favorite camp knife, albeit a bit large for fine tasks.
Winkler Blue Ridge Hunter is my fixed blade edc, Benchmade Adamas is my folder edc.
I like TCT knives and Half face Blades. For extreme use Grayman knives are my go to.
Great video Brother! Love what you're doing!
Thank you!
@3of7 check out William Collins knives. I've used them for years. Has a unique multi grind blade. Scandi at rear for wood working camp stuff. Front part is usually flat or saber grind. Handmade knives. I buy my through Great Northern Knives of Alaska. Ask for Jeff.
William Collins knives are absolutely amazing! Sam Adler from Vietnam
I've been impressed by the quality and durability of heavy duty knives by Condor Tool. But like you I have a LOT of different knives. It is like the ultimate quest to find the perfect knife.... If I'm going to be out in the woods, I have found a small folding saw to be extremely helpful and cuts down on the amount of chopping required of my knives or axe. I also ALWAYS carry a whetstone that I use on my tools whenever I have used them, or I'm about to use them, or I'm thinking of using them, or after every meal, whenever I brush my teeth.
If stealth is a consideration, a saw is much quieter than an axe, hatchet or big knife chopping away.
Great video my friend. Subbed. My favorite survival knives are made by Survive Knives. The GSO series. My favorite woods/bush craft knives are made by Bark River. Specifically the bravo one or 1.25. Also the Bark River Aurora. The features I really like on the Bark River‘s are their wonderful ergonomic handles. Thank you for you comment and service to our country. I hope and pray that they weren’t in vain! God bless you. John
Ever hear of a Randall knives in Florida ? You need to order 5 years ahead of time but the knives are incredible.
I have a Bark River "Gunny" which I believe is a nice hiking knife that can handle some camping/bushcraft tasks but its not too imposing to carry horizontal or vertical on your belt. Not too heavy but durable as well. Just my inexperienced 2 cents.
Very cool collection!
Remember when the seals were called, the silent service? And you didnt have to hear about them every other video.
Lots of good knives out there , I like K Bar the BK 9 also the Ontario Marine Raider. I have many good knives but I use a Lanski machete with a Gukara style blade and I've turned trees into firewood it's a excellent working blade.
I used to teach wilderness survival and safe knife use, back in the early 80's. Long before chopping and batonning with a knife was even a thing. So I will never baton with a knife. I have some good Tomahawks for that. Right tool for the job. And yes when I'm back packing, I carry at least three knives, a small folding saw, and a tomahawk. Most likely the Hudson Bay Hawk, from Cold steel.
Conan-"Riddle of Steel"
Neither men nor women nor beast can you trust.
But this Conan; You can trust.
Thank you sir I watched you on the bear podcast I am an old beaten down Grunt your very words have changed my life God bless you sir 🫡your new subscriber mike
I have an ESEE4, have you ever used one before?
love a good knife. i've got a daniel winkler hunting knife (no longer made, i think). the quality is felt right out of the box. shay's knives are badass as well.
I like a ESEE 5. It weighs 1 pound a little heavy but worth carrying the extra weight for the quality & many uses.
This man should be king
I have fixed kbar, folding kbar, and Gerber hatchet.
Bad ass video. Really enjoyed this one
My personal favorite is the Winkler survival. It has a ferro and fire-starter within the handle.
I gifted my KaBar to myself when I graduated Marine Corps Bootcamp. Semper Fi! 1984-1988.
Chad check out Medford knifes in Arizona, pricey but its quality. You might like them.
.
For a fighter. I like the original Peacekeeper from Cold Steel. I like utilizing reverse motion without having to alter the blade in ✋ hand.
I have been trying to find one for years. I have the Tai-Pan in CPM3V and that is wicked. Going to remove the handle one day and replace with G10!
That Kabar is made out of 1095 carbon steel. It's coated to prevent it from corrosion. I have approximately 140 knives between folders, fixed blade, and OTF's.
Good stuff man, thanks
Thank you for this video. I wanted to get your thoughts on the Ontario blackbird knife? Thanks again...
Good show 💪