Hi mate always watching your videos you do a Brilliant job,I’m in the process of trying fix a Karelma mobility scooter does everything but move. So I’m going to put your videos to practice cheers mate
@Nithsdale Wheelchairs V brilliant videos and very informative and helped me alot with a second hand scooter I brought which is now running like a dream after fitting new brushes.
Thank you very much for this video. I Have a Rascal 388 out back giving off a loud beeping when I try to use it and it won't move. Now I know where to start to try and find the fault, guess where I'm going now......
I have a sapphire scooter and although ok most of the time but there are occasions it sometimes does an emergency stop. I will now move when i turn off the key and back on again. It will then start and travel a few yards but does the same again within a few yards. Other days it goes with no problem.. when it does the stop it sounds a beeping sound until i go through the procedure of turning off an on again. Please give me a clue. I returned to the shop where i bought it but they couldn’t find a problem apart from a small stone in the battery connector which the said my have been the cause. I was told the i have more problems =scooter than any other customer with the same scooter. It is about four years old.
Hi sounds like a bad connection my friend check all wires. Remove seat and back cover lift wheels of the ground and support with a brick tape up wig wag lever until the scooter drives. Slowly check and move every wire you can seen and all connections. Hope that helps
thank you for the video i had the same problem with a shoprider one of the wires had broken on the back of the scooter only found bye using a multi meter i was on ebay before buying stuff like ecu and othert stuff if i had of used the multi meter in the first place it would of been a cheeper option
Hi, When you showed the testing of the electric break using the multimeter, it was not visible where you were testing with the probes. Are you able to explain the test if possible with a video, to see where the probes are placed.?. Your videos are very very good, it has helped me to test various things when a problem arrives.😊👍 17:29 something else I have problem with is, when I undid the tiller head to replace the ignition switch, I found two wires not connected anywhere and with tape around the ends, looks like it was done with tape you heat up, done at manufacture.?. The horn buzzer also sounds when wires are moved about, does this sound like a short circuit.? 🤔😊
Hello Tom, !, I can’t get any comments on the site so hope this gets to you,. Don’t know if you have any idea but I have a shoprider with solid tyres, from and rear, the rear one on the near side appears to be fouling on the screws of the electric motor, would you have any ideas as to why.🤔🤔 All the best Mick.
Hiya , love your videos very in depth information , can you tell me which is the continuity symbol on the multimeter please , I've bought a parkside meter thks
great love your videos very informative . i have a shoprider with a similar problem . . turn the key on and power light comes on and no beep . but as soon as i operate the paddle . the scooter gives off a 1 second interval beep and will not work . how ever i can turn the key on and off afew times and the fault will dissapear and the scooter will operate as normal . then some times when i stop the fault will reappear . but not all the time . I have checked brake and motor as per video . also checked the throttle pod checked all harness connections and can not see any hing unusual on thr harness . I notice when the fault occurs and i operate the paddle . the relay in the controller does not click and the break does not click either .
@@highflooringinstallations5593 hi check the videos there is one o the throttle pots and that shows you how to do it. Or get an ohm meter ans set pot or 2.5k that should be close enough
Hi Tom, I have a rascal, no light faults and batteries good,when I push forward I can hear the motor spinning but the scooter does not move? Same with reverse? Any ideas, going through all your videos now to see if anyone else has had the issue. Thanks for your videos
Ii have two,Red lights 2 yellow lights 2 green lighs showing on old Rascal mobility scooter 2.5i controll arm. Whats left to check that might help me get it running, ?
I have a fairly new and clean bios sprint 8.0 mobility scooter and the motor has no continuity, what should I check next with no Continuity? I am getting a code 4-2
Hello friend, great video, I have a rascal 388. The power level meter shows that there is power, but there is no power at the charger input or the wig wag. I've tried using a multimeter. I've checked all fuses, and reset switch which is brand new, and still nothing. I checked the brushes and they look ok
@@tomjacques4 Hi Tom. I did notice that there is a single white wire with a little white nylon connector which doesn't appear to be connected to anything. It comes from the wig wag controller.
Hi I have a PERSUIT SPORT 36 volt By pride . I’m thinking it’s either the key or like som of your videos sho a fuse in the main brain box , SYMPTOMS :( are good voltage 37-38 volts turn key to on position No power to anything !!! checked main fuse and voltage . Next to check is key and brain box for fuses ??? What do you think Sr. Kevin from Oregon USA And New Scriber of yours ! Lots of very valuable information thank you ver much!!😊
Hi I have a celebrity x sport, will not go , no beeps but flashes 3 then 1, batteries fully charged 25 + volts are the charging point all fuses in the headstock are OK, not looked in the contol box or under the control panel yet, any Ideas please
hi there, do you know where i can get the wiring diagram for a shoprider gk9? someone ripped the head unit off and all i have is 6 wires that come from the controller. black, red, blue, yellow, orange and green i was watching one of your videos on the 5k pots needing to be in the middle at 2.5v so i figure the controller is programmed to switch from forward to reverse by the pot voltage. i just cant find the diagram that tells me whats what
Have Rascal Frontier port is faulty 1 pin is discoloured you push in not charging. Undone it. Un doing stem. From charger won't push in . What next step to do ?
I Dont Know If You Can Answer This But When I Go Down Inclines My Rascal Ultralite 480 Speeds Up Like Its In Freewheel Mode ? So Scary . Could It Be A Gearbox , Motor Or EM Brake Problem ?
Can you help me? I have a new Metro mobility scooter and it won't move. I have power & I'm not in free mode. When I try to move it automatically brakes & beeps. I don't know what to do.
Sorry don’t work on those products. Our customers don’t use them as they are seated too high and are in my opinion not very safe as the centre of gravity is very high and as well the 3 wheelers can be so unstable. I’ve had some people wanting to given them to me as they have fallen off them but never have taken them in. Sorry 😞 can’t help
I bought a veleco scooter over a year ago it had been stored in my daughters garage while I wanted to be rehomed into a disabled house I had it brought over in March and I can’t get it to work there is nothing when I switch on iv charged it overnight still nothing any idea what could be the problem? I’m so depressed not being able to get out and about as I can’t stand or walk for more than a few minutes. My daughter said it was working when it was first delivered as the driver gave my daughter a demo so she could give me one I’m in Irvine
Thankyou so much for your videos. I am 80 and my son gave me an old mobility scooter with new batteries. It ran just super but has stopped when the brake lever pulled to free wheel and so far I can,t find the problem but think the brake is involved. I want to turn it into a go cart for my grandson and me. I live in Victoria, Canada.
Hi mate always watching your videos you do a Brilliant job,I’m in the process of trying fix a Karelma mobility scooter does everything but move. So I’m going to put your videos to practice cheers mate
@@roberthardy6139 good luck parts are expensive for that one
Hurray he's back love your videos 👍
Thank you, I just found some time and the camera 🎥 with a little dust 😂
@Nithsdale Wheelchairs V brilliant videos and very informative and helped me alot with a second hand scooter I brought which is now running like a dream after fitting new brushes.
i forgot to mention ,I am in sydney Australia . so very much appreciate you reaching out to us so far away .
Thank you very much for this video. I Have a Rascal 388 out back giving off a loud beeping when I try to use it and it won't move. Now I know where to start to try and find the fault, guess where I'm going now......
Good to see you back and well. another great video thank you.
Thanks Clive glad to see your still watching
I have a sapphire scooter and although ok most of the time but there are occasions it sometimes does an emergency stop. I will now move when i turn off the key and back on again. It will then start and travel a few yards but does the same again within a few yards. Other days it goes with no problem.. when it does the stop it sounds a beeping sound until i go through the procedure of turning off an on again. Please give me a clue. I returned to the shop where i bought it but they couldn’t find a problem apart from a small stone in the battery connector which the said my have been the cause. I was told the i have more problems =scooter than any other customer with the same scooter. It is about four years old.
Hi sounds like a bad connection my friend check all wires. Remove seat and back cover lift wheels of the ground and support with a brick tape up wig wag lever until the scooter drives. Slowly check and move every wire you can seen and all connections. Hope that helps
@@tomjacques4 Thanks for the advice I will give it a go
Hi do you know where I can get new ball joints on steering track rod ends for a Rascal 850 Thanks.
www.nithsdale-wheelchairs.com/prods/11445/track-rod-ends.html
@tomjacques4 thank you for info.
Great to see you back mate
merry christmas and thanks for all your help
Merry Xmas all
thank you for the video i had the same problem with a shoprider one of the wires had broken on the back of the scooter only found bye using a multi meter i was on ebay before buying stuff like ecu and othert stuff if i had of used the multi meter in the first place it would of been a cheeper option
Hi, When you showed the testing of the electric break using the multimeter, it was not visible where you were testing with the probes. Are you able to explain the test if possible with a video, to see where the probes are placed.?.
Your videos are very very good, it has helped me to test various things when a problem arrives.😊👍 17:29 something else I have problem with is, when I undid the tiller head to replace the ignition switch, I found two wires not connected anywhere and with tape around the ends, looks like it was done with tape you heat up, done at manufacture.?. The horn buzzer also sounds when wires are moved about, does this sound like a short circuit.? 🤔😊
Hi have done plenty of testing the brakes check some other videos. Testing is done from the 2 wires that come from the brake
Hello Tom, !, I can’t get any comments on the site so hope this gets to you,. Don’t know if you have any idea but I have a shoprider with solid tyres, from and rear, the rear one on the near side appears to be fouling on the screws of the electric motor, would you have any ideas as to why.🤔🤔 All the best Mick.
I like your video Im having trouble with my Metro mobility scooter
@@lawe1933 Invacare product usually very reliable what’s the flash code
Hiya , love your videos very in depth information , can you tell me which is the continuity symbol on the multimeter please , I've bought a parkside meter thks
great love your videos very informative . i have a shoprider with a similar problem . . turn the key on and power light comes on and no beep . but as soon as i operate the paddle . the scooter gives off a 1 second interval beep and will not work . how ever i can turn the key on and off afew times and the fault will dissapear and the scooter will operate as normal . then some times when i stop the fault will reappear . but not all the time . I have checked brake and motor as per video . also checked the throttle pod checked all harness connections and can not see any hing unusual on thr harness . I notice when the fault occurs and i operate the paddle . the relay in the controller does not click and the break does not click either .
Hi there. I have a Pegasus Pro Invacare 2017. How do I recalibrate the neutral switch. I get a code 6.
@@highflooringinstallations5593 hi check the videos there is one o the throttle pots and that shows you how to do it. Or get an ohm meter ans set pot or 2.5k that should be close enough
Hi Tom, I have a rascal, no light faults and batteries good,when I push forward I can hear the motor spinning but the scooter does not move? Same with reverse? Any ideas, going through all your videos now to see if anyone else has had the issue. Thanks for your videos
great video thank you
Ii have two,Red lights 2 yellow lights 2 green lighs showing on old Rascal mobility scooter 2.5i controll arm. Whats left to check that might help me get it running, ?
I have a fairly new and clean bios sprint 8.0 mobility scooter and the motor has no continuity, what should I check next with no Continuity? I am getting a code 4-2
hi can i replace the 850 motor with one from a rascal 388 or a racal pioneer thanks
@@stephensmith-p8z there are 2 different motors for the 850 depending how old
Hello friend, great video, I have a rascal 388. The power level meter shows that there is power, but there is no power at the charger input or the wig wag. I've tried using a multimeter. I've checked all fuses, and reset switch which is brand new, and still nothing. I checked the brushes and they look ok
Check back from the 3 pin socket. Could be a fuse inside the controller
@@tomjacques4 Hi Tom. I did notice that there is a single white wire with a little white nylon connector which doesn't appear to be connected to anything. It comes from the wig wag controller.
Hey Tom, I managed to fix my Rascal 388s. It's super fast, Woohoo. 🤣👍🤣👍
21:15 Des from New Zealand
I have a strider MD4 that is showing a fault with a 2 flashes on using the foward/reversed lever. What does this mean.
Recon it may be the egis controller check motor brushes and connections
Hi I have a PERSUIT SPORT 36 volt By pride . I’m thinking it’s either the key or like som of your videos sho a fuse in the main brain box , SYMPTOMS :( are good voltage 37-38 volts turn key to on position No power to anything !!! checked main fuse and voltage . Next to check is key and brain box for fuses ??? What do you think Sr. Kevin from Oregon USA And New Scriber of yours ! Lots of very valuable information thank you ver much!!😊
Sorry for late reply. First check voltage at ignition if none then Follow power from the battery to the ignition. Also
Check loom connections
Hi I have a celebrity x sport, will not go , no beeps but flashes 3 then 1, batteries fully charged 25 + volts are the charging point all fuses in the headstock are OK, not looked in the contol box or under the control panel yet, any Ideas please
hi there, do you know where i can get the wiring diagram for a shoprider gk9? someone ripped the head unit off and all i have is 6 wires that come from the controller.
black, red, blue, yellow, orange and green
i was watching one of your videos on the 5k pots needing to be in the middle at 2.5v so i figure the controller is programmed to switch from forward to reverse by the pot voltage.
i just cant find the diagram that tells me whats what
Sorry we don’t have any diagrams but have complete looms in stock
Have Rascal Frontier port is faulty 1 pin is discoloured you push in not charging. Undone it. Un doing stem. From charger won't push in . What next step to do ?
Just out of curiousity what would the total charge be on this repair to the customer
Yep I remember this job years ago now this is a common problem with the rascal tiller that move. Cost would be the price of a tiller loom.
Hi my sister has got a shoprider and when she goes on it it's ok then the bolt holding the back wheel on spins loose how can I fix it
Remove bolt and clean with de-greaser agent then add some thread lock to the bolt and refit
@@tomjacques4 arr thanx I'll try that because I use threadlocker on my 50 mph e.scooter it's the blue not red you use don't you
I Dont Know If You Can Answer This But When I Go Down Inclines My Rascal Ultralite 480 Speeds Up Like Its In Freewheel Mode ? So Scary .
Could It Be A Gearbox , Motor Or EM Brake Problem ?
Can you help me? I have a new Metro mobility scooter and it won't move. I have power & I'm not in free mode. When I try to move it automatically brakes & beeps. I don't know what to do.
Just in middle of video. Ime thinking a fuse from one of the battery connectors. Do drawing from one battery.
We have an e wheels ew36 fully charged battery's even display shows full battery as well light come on to????help??
Sorry don’t work on those products. Our customers don’t use them as they are seated too high and are in my opinion not very safe as the centre of gravity is very high and as well the 3 wheelers can be so unstable. I’ve had some people wanting to given them to me as they have fallen off them but never have taken them in. Sorry 😞 can’t help
Great thanks mate 😅
No power to the trottle control what should I do
Thank U very helpful
Thanx” I’ll ck’ my 4-wheeler in the morning “ Aloha’T
I bought a veleco scooter over a year ago it had been stored in my daughters garage while I wanted to be rehomed into a disabled house I had it brought over in March and I can’t get it to work there is nothing when I switch on iv charged it overnight still nothing any idea what could be the problem? I’m so depressed not being able to get out and about as I can’t stand or walk for more than a few minutes. My daughter said it was working when it was first delivered as the driver gave my daughter a demo so she could give me one I’m in Irvine
Check the battery voltage possible completely discharged may need new battery 🪫 battery
Must be wire on front broken
Grand
Thankyou so much for your videos. I am 80 and my son gave me an old mobility scooter with new batteries. It ran just super but has stopped when the brake lever pulled to free wheel and so far I can,t find the problem but think the brake is involved. I want to turn it into a go cart for my grandson and me. I live in Victoria, Canada.
Ni puta idea hazlo todo español si no sabes que lo haga otro
12:12