Building A Gravel Shed Base
Вставка
- Опубліковано 25 вер 2021
- This is how I built the base for our pre manufactured shed using 4"x6" timbers and 3/4" crushed stone. Used ~ 6 tons of stone.
Shed is 10’ x 16’, base is 13’ x 19’.
Shed built by Diamond Buildings: diamondbuildings.com
Email:Ryan@handymanandthehound.com - Навчання та стиль
Love this tutorial, could you tell me about how much stone was used for this? What size shed? Thanks!
Shed is 10’x16’ but the gravel pad is 13’x19’. I ordered 6 tons of washed 3/4” crushed stone with fines (smaller pieces). The fines help pack everything tight.
I thought fines was a bad idea because it prevents drainage. Am I wrong?
Fines allows the rock to be packed tightly. Stone dust would prevent drainage which is why I chose washed rock.
Beautiful, really nice job guys, well done.
Thank you!
Thanks for the making the video. I’m waiting for the shed company to deliver my 10x16 barn shed. I was looking for ideas for the base and this answered them all. Thanks
And also on the other comment you mentioned grass in the rocks. Didn’t consider that but good to know.
Thanks for watching! Good luck with your shed!
Nice job. Thanks for handy video.
Thanks!
The PVC trim around the bottom was a great idea
It really helps finish it all off. Thanks for watching!
Clean !
Thanks!
Late to the game, but the easy way to do those anchors is to insert the handle of the rachet in the anchor loop, hold onto the socket like a handle and spin it. More leverage and faster than an impact.
Good idea!
Great tutorial, answered alot of questions I had. What is that yellow holder you used to cut the 4x6's?
It’s called a plate vise! Neat tool. It’s got cutouts for common sizes of dimensional lumber. Slide the board in and the plate vise will hold it up off the ground so you can cut it.
Thanks for the video what do you have in time for the build do you estimate?
I am going to have a few pads quoted and am considering doing myself but we are running out of season here in Michigan so need to weigh the cost outsourcing vs labor time into my equation since I'm building the shed once the pad is down.
The wood border I did in a day, then the anchors and gravel was another full day.
You do GREAT work!! How much was the shed?
Thank you! I don’t remember exactly but the manufacturer has an online custom shed builder tool that you can get a quote for. diamondbuildings.com
I see you drove 4 36inch earth anchors into the ground. How many galvanized cables did you purchase and where did you use them?
2 cables, one in the front for the front two anchors and one in the rear.
quick question, your wood border, do you have multiple pieces of wood stacked or just one 4x6?
Just one 4x6
I might have missed this in the video who manufactures the shed you bought?
diamondbuildings.com
Hey! Great work! Just wondering what your reason was for building a much larger base than actual size of the shed? Did you wanna make sure there's good drainage all around? I'm thinking the 2 steps to get in and out of the shed could get annoying or unsafe if it was a workshop. Any regrets with not making the base closer to the actual size of the shed?
Thanks! I made it bigger for a few reasons. First was when I had it delivered it made it easier to set down with some wiggle room all around it so he didn’t have to be precise. Second I had planned on making a ramp for the double doors to get around the two steps. Honestly I don’t have any issues with two steps on the side door and I’ve carried a lot of stuff in and out.
Lastly when it rains the water comes off the roof and hits the gravel instead of my yard. Ever see houses without gutters and the rut that forms around the perimeter from roof runoff? This prevents that if you don’t want gutters.
My only regret is that the gravel holds grass clippings and dead leaves. Otherwise I’d do it the same way again.
@@handymanandthehound5213 thanks for taking the time to reply! Greatly appreciated!
5:51 Shinner!
Thanks for sharing. I wonder if it would be okay to not tie it down? 10x12, similar height and designs shed.
Anchoring it is good insurance. High winds or a tornado could pick it up and toss it easily. There are building codes requiring it to be tied down based on size so you should check. Good luck!
What's the red hood you have there under the shed? And how did you put that in?
The red hook is an anchor to tie the shed down. Start the video at 0:52 it explains everything
Sorry if this is a stupid question... What are the anchors for? Keep the shed from blowing over or to prevent someone from stealing it?
To keep it from being tossed around in high winds. Required by code because of the size of the shed but there was no info on required size of anchor or cable.
How does water drain out of the gravel box? Is the liner water permeable?
The liner is water permeable. It’s a woven geotextile which isn’t as permeable as a felt liner but it still allows drainage. Plus the holes I cut for the earth anchors and the area that is overlapped in the middle allows for more drainage. The box has never filled up with water
can i apply gravel on my 'not level' concrete floor and just apply gravel until its level ? then put my shed on top of it ?
I would suggest adding a piece of pressure treated lumber to the low spots. Gravel could work but it might act as rollers if you ever get a bad wind storm.
Where did you get the white pvc trim and vents?
Menards!
Do you think this would be cheaper or more advantageous than a wood frame base?
I think it’s a better option than a wood base. Lumber is really expensive right now and the manufacturer recommended a gravel or concrete base. Either of these will last longer than wood.
I am currently in the process of building a base almost like yours , except I dug down about a foot deep and am using
6”x6”x17’ for the long sides and 6”x6”x13’ for front and back and am putting a 12’x16’ shed on it. I want the top of my 6x6’s level with the ground , I like yours for sure makes it look finished
Looks like you went with 3/4" clean gravel, how did that work for you?
It worked great! Unwashed crushed stone would have packed too hard because of the included stone dust. This let’s water drain more easily. Would do it the same way again.
@@handymanandthehound5213 Thanks!!
What size of shed was you going to get?
This is a 10’x16’ shed, gravel pad is 13’x19’.
Do you have the plans for this SHed?
No I bought it pre assembled from Diamond Buildings in Illinois.
Did you level the ground before you added the treated wood frame?
I only leveled the ground underneath to wood frame. The rest didn’t matter because I was filling the frame with crushed rock.
@@handymanandthehound5213 thank you for your quick response. So can I assume that you did not have any sloping areas and you stacked 2 pieces of wood as the frame perimeter? No digging to put lumber below grade?
Correct. Only slight adjustments to get the frame level. I used (2) 4x6 beams for each side of the frame.
@@handymanandthehound5213 Thank you again. I’m trying my best to follow your lead despite the speed. Lol. I have sloping areas to work with. A few hours here and a few hours there getting this base together. Hopefully I will get there. This is the toughest part.
Good luck!
Will the wood rot over time ?
All wood will rot eventually; even pressure treated lumber. I used pressure treated here and I’m expecting it to last 20 years.
You realize instead of all that time ruining a socket you could have used a piece of rebar through the hole to push and twist that anchor?
Yep! It was a cheap $4 socket and I was expecting it to be difficult to drive in with my clay soil. With the socket I was able to push down while turning and use a longer breaker bar if needed. Using a long piece of rebar would have worked but I would have had a hard time keeping the anchor straight. I’d be interested in seeing a comparison if you ever do one! Thanks for watching
What is the pitch of the roof looks nice
I’m not sure of the pitch but it’s pretty steep. Not very easy to crawl on. I added an extra vent and it wasn’t easy!
@@handymanandthehound5213 thanks man what is the actual size and how tall is the walls ?
@soufianekerroum8650 I believe it is a 10’x16’ shed, there’s some extra details in the description. Walls are around 6’ tall
What was your cost for all materials?
I think it was somewhere around $300. But it all depends on current lumber prices and the size of your particular project.
$300? My 6 yards of crushed stone was $316 and I might need more
I don’t remember exactly but I think my crushed stone was $250 so the $300 estimate is probably a low. Closer to $400 for everything.
We paid $185 for 4x6 lumber for a 14x22 base (12x20 shed). The weed tarp was another $135 for heavy duty 5oz 5ft x 100ft roll and the gravel is going to cost 360 for 8 ton plus lag screws so $700 altogether. Still way cheaper than concrete
what size shed is this
10’x16’. The gravel base is 13’x19’
I love this prebuilt shed, but I cannot use it because there are many Squirrels around my house.
Great video! But regarding the number of timber courses, I'm seeing a contradiction in your comment replies:
To one, you replied:
"Just one 4x6"
Then elsewhere:
"I used (2) 4x6 beams for each side of the frame."
So, just seeking clarification on this.
I used (2) 4x6 beams for each side. Joined with half lap joints secured with treated structural screws. Sorry for any confusion!
@Handyman And The Hound Thanks for the reply! Quick clarification:
By "each side," are you differentiating between left/right (ie: the sides) vs. front/back (non-sides)?
Or do you refer to all four sides?
There are 4 sides. Front, back, left and right. Each side has (2) 4x6 beams for a total of 8 beams.
@Handyman And The Hound perfect, thanks!
Not enough dog.
You’re right but it’s hard to get the right balance between entertainment and how-to. Thanks for the feedback!
Way too much work. I'll have to pay someone to do it.
Ok! Thanks for watching!
Hey, this is from Family Handyman we are really interested in your video and want to promote it across our brands. Please contact us back so we can discuss more. Thank you.