Neotec NH 895 Chainsaw Review: Is It Worth the Investment - CMF 38

/ @centralminnesotafirewood
Official Merchandise www.bonfire.co...
Check out our Facebook Page
www.facebook.c...
Join me as I continue to build inventory for the next heating season here at Central Minnesota Firewood. Can I start and grow a business with $300? Will it work? Find out with me as I document my days through the upcoming weeks as I try to put together a network in the firewood sales market in my area.
#firewood #business #vlog
--------------------------------------------------------------------------------------------------------------------------------------------------
Husqvarna Oil Cap - - - amzn.to/3VTlVee
Accessories / Roadside Stand
Solar Lights - - - - amzn.to/455yast
Flag - - - - amzn.to/4ead00c
Cash Box - - - - amzn.to/4bP8jYb
Stretch Wrap 5” - - - - amzn.to/4aKlpVf
Stretch Wrap 10” - - - - amzn.to/4bVIc1s
Trailer - - - amzn.to/3RecswF
Tools
Drill - - - amzn.to/4c6s1OM
Sawzall - - - amzn.to/3Kwpge1
Grinder - - - amzn.to/4aLwiWT
---------------------------------------------------------------------------------------------------------------------
Support the channel by using our Amazon Affiliate links
Chain Sharpening
Wen Dremel tool - - amzn.to/43VMrXU
Timber Tuff 12 Volt Sharpener - - www.timbertufft...
Chainsaws
Poulan Pro5020 Chainsaw - - amzn.to/3wC1NED
Neotec NH-895 - - amzn.to/3xqX6hg
Bar and Chain Oil - - amzn.to/3P4rlk0
Carburetor Tool Kit - - amzn.to/3PTTCKC
12 Volt Chain Sharpener - - amzn.to/3uYhvcD
Chainsaw Tuning Kit - - amzn.to/3V2MS0q
File Chain Sharpener - - amzn.to/49O4v8o
Bar Dressing Tool - - amzn.to/43y4sLC
Other tools used on the channel
Fiskars Super Splitter Axe - - amzn.to/3SYZQtq
Moisture Meter - - amzn.to/3wKMSrs
Felling Wedges - - amzn.to/3x5jfBw
Milwaukee M18 Drill Combo - - amzn.to/42ZOXfs
Stanley Pry Bar - - amzn.to/3TzEF2v
Chimney Brush 20 foot - - - amzn.to/4c3lT9W
Chimney Brush 26 foot - - - amzn.to/3VvaCKo
Chimney Brush 33 foot - - - amzn.to/4e8EUK6
Video and Audio Equipment
Lavalier Microphone (used after video #7) - - amzn.to/3Ph2nOt
Shotgun Microphone - - amzn.to/3wP8lQ9
Big Camera - - amzn.to/4cfvhIO
Action Camera - - amzn.to/3VdYD3U
Tripod - - amzn.to/4a7x4NT
Action Cam mounts - - amzn.to/3wWrfEU
-----------------------------------------------------------------------------------------------------------------------

[@travisdoesfirewood]

Nice tool brother, keep cuttin'!

[@BGWenterprises]

((Old chainsaw nerd warning))
.
I have a 394 that needed a replacement topend.
Converted it to 395, as the big bore 58mm kit, is not available for a 394. Basically a different intake boot/pulse line is the primary difference between the two models besides very small differences in the plastic covers.
.
I did it without the base gasket, and its one serious low rpm powerd saw. And definitely a pain when it gets flooded. As its very hard on the arm to pull over.
.
I also have one i made up as best i could to replica a limited edition gen1, 372xpw saw. A gen1 has the compression release on the side of the jug made before 2010.
not thru the top plastic, those are gen2s, and are called x-torque by husqvarna.
I have about 80 tanks thru it, i run it a little different. With a 28" and a 8 tooth sprocket for cutting red alder, a very very soft hardwood. I believe the 3rd fastest rotting wood on earth.
.
I also use it on stacked up firewood, as are normal 32" 7 tooth or 37" on the 394.5 as i call it, is a bit much for wood averaging 26"
.
They where 51.4mm oem, the gray market big bores are 52mm.
.
Worldwide the oem 51.4mm is no longer made, best i know.

[@firewoodathome]

👍👍

[@JSProDrones]

Thanks for the video. If you get a chance to make a video on how to take apart the oil pump and file it down that'd be great. Also if you have any info on the new oil fill cap. Thanks

[@CentralMinnesotaFirewood]

I added a link to the cap in the description. Sorry I didn't have that in there before. The edges needed to be sanded on the cap slightly for it to seat correctly. Took maybe 2 or 3 seconds on a belt sander, but can easily be done by hand

[@JSProDrones]

@@CentralMinnesotaFirewood Awesome, thank you!

[@CentralMinnesotaFirewood]

@@JSProDrones Glad I can help!