Neotec NH-895 First cuts: Reaction and First Impressions - Central MN Firewood #13
Вставка
- Опубліковано 2 гру 2024
- Very first cut with the Husqvarna 395XP clone. Get my reactions and first impressions as I cut a large Burr Oak
Join me as I continue to build inventory for the next heating season here at Central Minnesota Firewood. Can I start and grow a business with $300? Will it work? Find out with me as I document my days through the upcoming weeks as I try to put together a network in the firewood sales market in my area.
#firewood #business #vlog
---------------------------------------------------------------------------------------------------------------------
Support the channel by using our Amazon Affiliate links
Chainsaws
Poulan Pro5020 Chainsaw - - amzn.to/3wC1NED
Neotec NH-895 - - amzn.to/3xqX6hg
Bar and Chain Oil - - amzn.to/3P4rlk0
Carburetor Tool Kit - - amzn.to/3PTTCKC
12 Volt Chain Sharpener - - amzn.to/3uYhvcD
Chainsaw Tuning Kit - - amzn.to/3V2MS0q
File Chain Sharpener - - amzn.to/49O4v8o
Bar Dressing Tool - - amzn.to/43y4sLC
Other tools used on the channel
Fiskars Super Splitter Axe - - amzn.to/3SYZQtq
Moisture Meter - - amzn.to/3wKMSrs
Felling Wedges - - amzn.to/3x5jfBw
Milwaukee M18 Drill Combo - - amzn.to/42ZOXfs
Stanley Pry Bar - - amzn.to/3TzEF2v
Video and Audio Equipment
Lavalier Microphone (used after video #7) - - amzn.to/3Ph2nOt
Shotgun Microphone - - amzn.to/3wP8lQ9
Big Camera - - amzn.to/4cfvhIO
Action Camera - - amzn.to/3VdYD3U
Tripod - - amzn.to/4a7x4NT
Action Cam mounts - - amzn.to/3wWrfEU
Заводится хорошо-но долго😊.
Did you put oil in the tankkinked oil pickup line in the tank, plugged bar oil passage, is the oiler turned up, is the oil pump spline lined up with the clutch drum.
One other reviewer did mention the bar oil passages not being drilled out on his bar.
I had oil. It was oiling at first. I have a video tomorrow about it. I have a couple thoughts on it. I am a complete novice when it comes to chainsaw mechanics, so I am learning still lol. I did have the pump turned up all the way as well.
Nice I have few videos of the 660 and g288 few years back. Novice to chainsaws as well but I'm an automotive tech. I like the husky g288 more but 660 eats good check them out if your board lol
Thanks Ill check them out
What's the price comparison on the neotec to a Husqvarna? Last year invested in a 572. Sure am happy with the extra power compared to my 455.
@RyanWI715 the Husky 395xp averages about $1300 depending on where you actually buy it. If you use the link in the description for the Neotec with a 28" bar and use the $100 coupon amazon is offering, you can pick it up for $348
Didn't scrolled down far enough in the description. Thanks! Hope your sales are good!
👍👍
Sounds ill, like ole Walz 😯
Was running the 1st gallon super rich to help during break in. Leaned it out quite a bit since that video