Joli ! Mais moi j'aurai mis du joint sur les couvercles que tu as fait , et c'est la couleur d'origine ? ( désolé mais moi elle me fait "mal aux yeux"!)😁
Great video. 👍 Bridgeport paints there industrial mills, one coat primer, two coats paint and three coats clear coat. Need bigger grinding wheel. Great project. You saved a great machine for the future.
Ну какая-же это мельница?-, это ручной наждачный гриндер!-, тем не менее -, работа проделана большая, молодец ретромастер!-, пора приобретать пескоструйный шкаф для более качественной реставрации!-, здоровья тебе и удачи во всём!-, новых творческих успехов и хорошего настроения 👍👍👍🤓🛠️⚙️🔩🔗🦾🤝🇷🇺👈🤝!!!
Needs a bigger grinding stone, the original likely was a sandstone block that was almost touching the table surface. Still have a single gear stage one around, with the original stone in it as well, which was used by my father for years. Should pull it out and dress the stone up, it has been well used over the decades. Pack up the space between the shaft and the stone with kraft paper strips, to keep it running true, there should be almost no gap, though newspaper works well there as a substitute.
If I walked into the kitchen and you had that clamped on my counter top.... Well you'd know about it! If there is a Mrs Workshop - DC I really hope that she doesn't see this video! 😁🧡
![The Most Unnecessarily Complicated Antique Tape Dispenser [Restoration]](http://i.ytimg.com/vi/fxieKFowcjE/mqdefault.jpg)
![The Most Unnecessarily Complicated Antique Tape Dispenser [Restoration]](/img/tr.png)
Hello Guys! Please don't forget to Subscribe and leave a like the video if you like it.
And if you don't, Thanks for Watching!
With Love - DC! ❤️
Joli ! Mais moi j'aurai mis du joint sur les couvercles que tu as fait , et c'est la couleur d'origine ? ( désolé mais moi elle me fait "mal aux yeux"!)😁
Great video. 👍 Bridgeport paints there industrial mills, one coat primer, two coats paint and three coats clear coat. Need bigger grinding wheel. Great project. You saved a great machine for the future.
Nice to know that! Thanks Loyd! ❤️
Ну какая-же это мельница?-, это ручной наждачный гриндер!-, тем не менее -, работа проделана большая, молодец ретромастер!-, пора приобретать пескоструйный шкаф для более качественной реставрации!-, здоровья тебе и удачи во всём!-, новых творческих успехов и хорошего настроения 👍👍👍🤓🛠️⚙️🔩🔗🦾🤝🇷🇺👈🤝!!!
Love the outcome love your wood turning skills brilliant out great video to watch brilliant craftsmanship
Thanks Gaynor! ❤
Needs a bigger grinding stone, the original likely was a sandstone block that was almost touching the table surface. Still have a single gear stage one around, with the original stone in it as well, which was used by my father for years. Should pull it out and dress the stone up, it has been well used over the decades. Pack up the space between the shaft and the stone with kraft paper strips, to keep it running true, there should be almost no gap, though newspaper works well there as a substitute.
Yep, the only Stone that I find with the tiny hole on center was this one, so I used this one. Thanks for comment Sean! ❤️
Very nice 👍
Thanks Sven! ❤️
Nice project 👍 I wasn't sure about that colour but once it was back to gether it looks amazing. Great job
That's the original color, my câmera show It like blue but It is a vintage green.
Thanks Mate! ❤️
If I walked into the kitchen and you had that clamped on my counter top.... Well you'd know about it! If there is a Mrs Workshop - DC I really hope that she doesn't see this video! 😁🧡
Well that's the only table that the grinder fits.😂😂😂
Thanks Deena! ❤️
Really? I wouldn’t have a problem with it, then again, I would have also been involved in the restoration.
Looks new again and you did a wonderful job restoring it as well!!!!
Enjoyed the video and I gave it a Thumbs Up
Thank you so much Oneshot! ❤️
Great work on the grinder. Good choice of color . looks like it will last another 70 yrs. Before your grandkids redo it again. 😂 enjoyed video 👍 👍 👍
That is the original color, it will last some good time now hehe'
Thanks Brent! ❤
Grease everywhere! 😄 nice job my friend, looks great! 👌🏻👍🏼👍🏼
A lot of grease hehe'
Thanks Dr. Hut! ❤
I am wondering why you put grease on the parts,when there are oil holes on it??
Cause its better to the Grinder work. Thanks for comment!
Ficou bom hein, da pra durar mais um século 👍👍👍👏👏👏🇧🇷
Muito obrigado Tarcílio! ❤️
Nice job well done.
Thank Mate! ❤️
Great job bro 👍👍👍👍👍👍
Thanks! ❤️
Bom trabalho. 👍👍👍 Obrigado por compartilhar
Muito obrigado! ❤️
TOP!
Vida útil a peça...excelente restauração!🙏❤️
Muito obrigado Enéas! ❤️
Ficou incrível. Parabéns 👏👏👏
Muito obrigado Marcello!❤️
good work
Thanks Halim! ❤️
Show Adm. Muito bom... De qual cidade é?
Muito obrigado! Sou do interior de São Paulo.
Parabéns!
Muito obrigado Wagner! ❤️
👏👏👏👏👏👏
👍😊
Hope grease doesn’t leak out without a gasket or seal of some sort.
If my wife saw me grinding away like that in the kitchen. I wouldn't be here to make this comment.
🤣🤣🤣🤣🤣
That's the only table that It fits. Thanks for comment! ❤️
Please use captions to explain the stages.
You can find the infomations about the stages in the description ❤️
didn't you get any trouble from "Mutti"? sharpening a rusty chisel in the good kitchen? oh well 🤯🪵🤕🤪
The only table that It fits was in the kitchen hehe'! Thanks for Watching! ❤️