Cura Questions - See and Edit G Code?

want to see and edit the gcode files made by cura slicer? i use notepad++, and you ca get it here: notepad-plus-plus.org/downloads/
Like and Subscribe!
Find 3dprinters and other cool Tech at:
www.amazon.com/shop/technivor...
SUPPORT TECHNIVOROUS 3D Printing:
TeeSpring Technivorous Merch!
teespring.com/stores/technivo...
become a channel member for youtube perks!
/ @technivorous
Paypal: [e-mail]
Check out my Patreon page: / technivorous
or you can buy me a coffee: www.buymeacoffee.com/technivo...
Send me a gwei! (ether address, all donations accepted!)
0x95F4EaB8A738F4F27e7c04aEe1E10C8E666C2D0c
send me a satoshi! (bitcoin address, all donations accepted!)
31zvj8ybxVVTLw6nPvAHYqu3qDVhC1sRqk
Current Channel Goal: 25,000 Subs!

[@shiccup]

how do i search by layor height in mm like if i want to print from layor 10mm how do i figure out where that is in gcode

[@feranderson7469]

Great video!!! QQ: Since cure 11.0 I can't set my retractions correctly. I tried múltiple times changing the retraction speed/distance but nothing seems to work. In cura 10.0 I had perfect retractions with 6.0 distance and 25 mm/s speed. Same issue Is happening on cura 12.0 beta. Any idea what other parameter to change for this new cura versions? Thanks a Lot!!!

[@jasonkeen7108]

How can you resume and edit a cura file for ender 3v2 noticed that gcode dont have zed axis in it just x,y,and extruder....plz help print failed at 11h

[@MrKartdriver5]

When I edit my start G code on my Ender 3 in Cura, I can change the movements, but it doesn´t let me extrude after the 2 purge lines. When the actual model starts, it extrudes again.. Why?

[@Jonno2summit]

I just want the auto-level deleted. I only need auto-level once, until I make changes.

[@TimsBitsnPieces]

Hey... I finally got my 1st print layer sorted.. and now printing my first test print model... I did notice when I was in my Creality Slicer that I could modify the Gcode right in the slicer and it saves there... I am using Creality Slicer v4.8.2 if that helps... once I get things really dialed in I will move over to Cura Slicer which seems to be the main silcer that everyone uses for the Ender 3v2 these days.. so I best get with the other kids in the playground and join them... but then again being different does have it's benefits but not always.... haha....

[@davidcortez8496]

I installed a cr touch bit the printer deos it normal startup and when I start printing it deos not print and it deos what it would When It finishes

[@chilloutsweet2601]

Hello I am a beginner printer,
When I was using my stock ender 3 with minor upgrades (cr touch, glass bed, ptfe bowden) I was getting great prints.
I recently upgraded my drive to sprite direct extruder and the prints are coming out great the only weird thing is after I updated the firmware to the sprite extruder firmware my cr touch probing spots are way off.
Like I said the prints are still coming out good but I am kinda OCD about things like this. How can I use what your showing us to change the problem locations for the cr touch level bed feature

[@chilloutsweet2601]

Probe*

[@tohneyteoh]

I want to pause the printer mid- print. How do I do it?

[@staticsrt8]

It sounds like I can’t simply rescale and add I fill on a perfect print. I have to cross reference everything back and forth? Not gonna lie, that’s dumb, lol. Cura can make a gcode but, can’t properly read it so you can make changes 😂🤷🏻

[@oldmanoldman8889]

Put me out of my misery, whats your video called where you show how to find start and end gcodes for your machine? Please..