How to Remove Bumper Retaining Clips (Removing GM/Chevy, Honda, Toyota Auto Body Fasteners))
Вставка
- Опубліковано 13 жов 2024
- How to Remove Bumper Retaining Clips. Removing GM/Chevy, Honda, Toyota, Dodge, Ford Auto Body Fasteners. How to Properly remove clips found on most common vehicle makes without breaking them. Step by Step detailed instructions.
Clip Removers Link - amzn.to/31fW4C4
Clips - amzn.to/3cNJMqk
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases.
Thank you for showing the variety of clips. So many of us have broken clips because we didn’t understand that there are pins
So glad to be able to help🙂
@@backyardchevy328 are there universal ones..Im having a difficult time finding for my 2015 acura tlx
@@heberslade3588 yea they have a kit they sell which are for certain sized hole diameter..so youll want to figure out the diameter u need
Excellent video with clear precise and easy to follow instructions with no annoying music either. Thank you!
Out of five I viewed this was the best that actually showed it done, Great video and commentating. A thumbs up and a save in my fixit section.
Thank you🙂 i really appreciate the support
Excellent video. Very informative. I love the camera angles. You really thought out where to place the camera so that the viewer could see exactly what you were doing. Thank you for posting this. I learned a lot.
Thank you🙂
Very clear, very simple, excellent tool explanation and usage examples!
Thank you so much it means a lot to me to have my video be appreciated🙂 thank you for the support🙂
Thank you very much for your superb, succinct, and yet detailed instructions on how to remove a variety of plastic rivets from the body of a motor vehicle. Your video contributed immensely to my understanding of the subject. Two👍👍thumbs up for an excellent job.
Wish I came across your video sooner. I destroyed all my clips before figuring it out.. Thx for going over all the current clips. The pry tool is a must.
Yea it does help removing those clips...hopefully it can help for any future clips🙂
Loved the step by step explanations.. very informative and to the point. Very helpful
Thank you🙂
Legit video! Thank you so much. Camera placement and clip at the end is fantastic! Wishing you all the best
EXACTLY the video I needed. Thank you!
Thats great! So glad to hear...thank you
Thank you for creating this guide, finally learnt how to remove these things and got to install mud flaps on my Toyota C-hr thanks to you
That's great🙂 so glad to be able to help
Super helpful to see all the different types of clips.
Thank you🙂
Nice video. Trying to work on a number of projects on two old vehicles, and this has helped a lot. Heading to HF to buy the tools.
Thank you🙂 so glad it was helpful..appreciate the support🙂
thank you. I had to watch about 5 videos before I could find an actual demonstration (not just an unboxing...lol) of the fancy 4 arm spring plier vs the C shaped plier.
Lol..well im glad to be able to help👍🙂
Well done. The visuals are good, and there are a variety of clips demonstrated.
Great video! This is much need information that I have not been able to find elsewhere. Thank you.
I appreciated the real-world examples -- that really helped. Thank you!
Very good video. Thorough and to the point.
Thank you for your video, I like how you don't rush through, very clear and make it look soooo easy! Any suggestions for a clip with the Phillips screw that seems to endlessly turn and turn and turn without coming out? Mine just spin and spin with no success ):
I’m having the same problem, find a solution?
This is vert helpful. Please add tags to make it easier to find, like #plastic #panel #fastner, #plastic #panel #plug, etc. Thanks so much!
Thank you🙂 yea i have the tags on the tags section of the video upload section, but i should try putting some on the description see if it helps🙂
Excellent video all types of locks has been described
Brilliant and really helpful, thx from the 🇬🇧
Thank you🙂..greetings from California USA
Muy bueno su video! Sin rodeos, expilcacion paso x paso con los diferentes tipos de remaches. Gracias👍
Muchas gracias🙂 gracias por el apoyo..empeze un canal en español tambien que se llama "backyard chevy español" si estas interesado
Very helpful 👍🏻 thank you 😊
Regards from Scotland 🏴
Thank you🙂 hello from United States California
Thank you. Godspeed you
Excellent video. Good explanations, video & not too fast.
Thank you🙂
Thank you very much for this awesome video! Much appreciated!
Thank you🙂
Great video , when I use a screwdriver to get rivets out the head’s usually break
I learned from your video, thank you.
So glad to be able to help🙂
Thanks so much made my day; now I can fix my Toyota.
Thats great🙂 glad to be able to help
Thank you very much! Very inormative video! Excellent!
Thanks! At 3:48 there was a clip with a pin inside. Yours in the video had a bit different design but on my car, the pin sits kind of lower and I can't pry it easily without damaging it.
It has no notches to fit anything on the side of it? Is the clip like completely flat but with the round portion in middle cut out? If so those are the type u push down in middle part and the clip can be removed.
@@backyardchevy328 The clip is completely round and has a round middle portion as you mentioned. I tried pushing it in but maybe I had to apply a bit more force. Just didn't want to break the clip. Will try your suggestion! Thanks
@@Charkatak yea it seems that would be the type u would push in middle so the fingers of the clip retract allowing u to remove the clip
@@backyardchevy328 Came to say thank you as I tried to push the pin down and it worked. Although it needed more force than I originally thought.
@@Charkatak so glad to hear it🙂 yea when theyre new or tight fit they will require a lil more force...thank you for all the support🙂
Nice video. Thanks for the tips. Very helpful.
Thank you🙂
Very helpful. Thank you!
Thank you
thanks a lot for this vid, very helpful!
Thank you🙂
Thank you for the tutorial.
Thanks, you make it look so easy ;)
Thank you🙂 hopefully its able to help make them easier for anyone who watches this video🙂
Great Man ! Absolutely Fantastic explanation. Great Work. Thank you so much
Thank you🙂
Dude. Thank you so much.
So glad to be able to help🙂 thank you
I wanted to find a better tool to remove the pin at 3:52. You used the same flat head screw driver I used. Is there a better tool?
Thank you, this video really helpful for amateur like me. Thumbs up !
Thank you🙂
Appreciate the info. Thanks
Thank you once again
Thank you for this video
Good video, thanks!
Hi mr backyard chevy.
I need to replace the RVC on my chevy captiva , but I dont know how to unsecure the boot lid trim .help please
good video , well done
Thank you
thank you🙂
My car has the first type. When I reassemble I'm probably gonna see if I can install the other kind which are much easier to remove. I keep damaging the holes, but I'm probably gonna remove the rest of them with pliers and be more careful.
Good idea, the others are a lot easier to work with
@@backyardchevy328 Just a little update, I used a combination of a hooked pick like you use for hoses to bend the sides in and then Vise-Grips to grip and lock onto the bent up edges and those worked great. I didn't see that in the videos I watched but I think that's a good way to get those types of rivets off if someone doesn't want to buy the tool or is in a rush. Someone working fast paced can probably get one out in 20 seconds to a minute using the Vise-Grips. I was damaging the holes before because I was pulling them straight instead of bending.
I also used to have a problem with the hose clamps, but you can either buy a tool for around $15 or use pliers and then replace them with the screw type for easier access in the future.
thanks , bolged my mind wat to use
Glad to be able to help🙂
thanks bro
Anytime🙂 thank you for the support
Where can you buy these types of clips and what are they called?
If u search on amazon for body clips, they should come up
Thank you sir💯💯💯
Thank you🙂
Thank you Sir. 🙌
Anytime🙂 thank you for the support
Thank you for sharing
Thank you for watching and for the support🙂
Great help vedio
Thank you🙂
Thanks brother
Thank you🙂
Useful; thankyou
Thank you🙂
Thanks for help us to save us a lot of money from a Dealership and Body shop 🤗😷 this time of the coronavirus pandemic 2019-2020-2021-20?? Like it help my parents and family and friends who need the help fix the cars 🚙
Happy to be able to help🙂
Thanks!!!
Are the holes for a 2012 Chevy Impala 8mm?
That is the more common size for GM body clips..i know for the 2008 the ones i removed were 8mm
@@backyardchevy328 ok thanks for your quick response 😇
@@dm1969able anytime🙂
thanks
Thank you🙂
That's what I need.. dealing with a flat head, not cutting it.
Honda has manufactured 1000 clips on various cars and bikes that I have broken.
what brand tool/part number is the dual action pliers ?
www.amazon.com/dp/B07X6FTT8M/ref=cm_sw_r_apa_i_wyjJEbEG0XQNT unfortunately the only one available is this renewed version or included with a full trim remover set
You are awesome
Thank you🙂
could u let me know the name of the tools? I tried a flat head screw driver but it wouldnt get under the screw
Clip pliers set..i have em linked in description.
@@backyardchevy328 Thanks man I ordered them and still cant get the smaller circle screw that attaches the upper and lower bumper loose. Im just going to take it by a shop and see if they know.
@@brandonm8131 does it just spin but not come out? If it is that type u can get a small pick and rotate it slowly as u pull up with a pick
@@backyardchevy328 No, its smaller then the clips and looks like its made of metal or something like that. I cant even get under it to move it or loosen it. I'll get it figured out soon enough.
so what happens when the edges break off the clips?
Can most people get away by just using a flat head?
I use em sometimes when im in a hurry, but it can break em..but it works
@@backyardchevy328 thanks man. Good video. I’ll probably just buy the special tool for it.
@@sanitary103 its definitely worth if u remove em often
Terimakasih..saya akan mencoba sendiri...tidak perlu ke bengkel
Thank you🙂
Does this work with metal rivets
No, metal rivets you wanna drill out the upper part of it then the remainder of the rivet comes off
How do you remove them if the head is broken
Nice video . 👍🏼 I have a video on my channel on a clip and fastners set.
Thank you🙂
Has anyone told you that you sound like Felipe Esparza
yea lol..in one of my other videos, they said i sounded like em
Backyard Chevy haha awesome
What’s the first tool called
Clip removal pliers and the others just named fastener clip remover
How do you remove clips that are over 10 yrs old and they are dull?
Yea those are risky, the plastic can get so brittle with the heat..sometimes I spray em with wd40 and that kinda helps lubricate em and keep em from breaking
whats the name of the tool??
Clip pliers set or body clip removal tool
Why don't they just use standard screws or bolts?
These clips are a nuisance especially when old and brittle.
No one shows when the bumper is ON the car and HOW to locate the f" screws then to remove them to take the freaken bumper off! ! Missing!!
Well every vehicle has different places where its secured but i can make a video on removing a front bumper, ive had footage on it on a scion frs that I never actually finished if it would help
@@backyardchevy328 please do as I mentioned NO one ever did a video when a bumper is ON and HOW to LOCATE the screws or bolts to remove ALL OFF and back on on most PLASTIC bumpers! This kind of VIDEO NEVER F" done lazy people out there!! 🏁🎌🚩🎌🏁
i always hated why on a single motorcycle there has t0o be 20 types of nuts, why not just make an overkill and put strongest wherever possible, like a hundred grams more or less is gonna make any difference, especially on a commuter's vehicle
THE MOST IMPORTANT THINGS ARE, WHAT ARE THE NAMES OF THOSE COOLS TOOLS ? ANYONE?
Clip pliers set its a 3 piece set
Please feel free to contact me if u need car clips and tools:)
I swear on any older car they're impossible to break
Why the Fu$$k do they even use these, just use a damn screw
Yea especially when throughout the years the plastic gets so brittle they break..but guess to them it was probably some cheaper quicker fastener
@@backyardchevy328 I ended up buying the pliers you showed here, those make it so much easier. 👍
@@DC-op8fs thats great! Glad they worked out for u
Hello, I am a supplier of auto clips from China. Do you need auto clips?
Very helpful, thank you.
Thank you🙂
Nice one ! Thanks !
Thank you🙂
Thank you
Thank you so much
Thank you, very helpful!