DIY Car Fastener Clip Removal Tool
Вставка
- Опубліковано 25 сер 2024
- A quick easy way on how to remove plastic clips from you car using something everyone has in the house. These auto fastener clips can be difficult to remove, especially without the right tools (amzn.to/3M1Ucm6). These clips can be found on nearly every make and model and hold your interior and exterior coverings in place. If you are attempting a quick repair and don't have an automotive pry tool kit, try a common kitchen fork!
Pry Tool Kit and extra retainer clips ▶ amzn.to/3M1Ucm6
If you are in need of a fastening clip but don’t have the correct tools available, take a fork and bend the inner prongs outward for an easy and quick diy auto clip pry tool. It's an effective and cheap way of removing these bumper, molding, and trim clips without much damage, allowing you to re-use them again and again.
Removing a car fastener clip can vary depending on the type of clip and the vehicle make and model. Here is a general process for removing a fastener clip:
1. Locate the fastener clip. It may be located on the interior or exterior of the vehicle and can be found holding various parts in place, such as trim panels, door panels, and upholstery.
2. Identify the type of clip. There are several types of fastener clips, such as push-type, twist-type, or Christmas tree clips. Each type requires a different approach for removal.
3. Gather the necessary tools. Depending on the type of clip, you may need pliers, a flat-head screwdriver, a trim tool, or a special clip removal tool.
4. Begin by carefully prying the clip out of its position using the appropriate tool. Be careful not to damage the surrounding area.
5. If the clip is a push-type, you may need to use a flat-head screwdriver or a trim tool to gently pry it out.
6. If the clip is a twist-type, you may need to use a pair of pliers to twist it back and forth until it releases.
7. Some clips are Christmas tree clips, they have a center pin that needs to be pressed down to release the clip. In this case, you may need a special clip removal tool or a flat-head screwdriver.
8. Once the clip is released, carefully remove it from the vehicle and dispose of it properly.
It's important to be gentle and careful when removing fastener clips, as they can be easily damaged or broken, which can make reinstallation difficult or impossible. If you are unsure about how to remove a particular clip, consult the vehicle's service manual or a professional mechanic for guidance.
🔔 Subscribe For More Here: / afiremedia
► Popular Videos: bit.ly/AFire-Po...
► All Playlists: bit.ly/AFire-Pl...
🌐 CONNECT:
Facebook: / afiremedia
Instagram: / afiremedia
Twitter: / afiremarketing
All Rights Reserved © 2023 AFire Media | Duplication, transfer or reuse of this material or excerpts thereof, is prohibited. For content use connect with @afiremedia at afiremedia.com
#prytool #autoclipremoval #lifehack #afiremedia
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
I am not a mechanic; and here I am trying to use a flat head to pop these off till I found this video. A FORK!!! Omg you are a lifesaving; thank you so much. This girl of mine is now in my small tool bag.
Glad you found it useful, thanks for watching!
Thanks so much!!!
You helped me ....
Making tools from household items and junk is Gods work. Bless you, my son.
I never thought about screwing action to get those things out...genius!
Awesome tip, I’ve been working on these fenders for 45 minutes. Thank you.
Glad it helped, thanks for watching!
Genius! I ordered the actual tool from Amazon THEN said "let me Google this. Came across your video and canceled my Amazon order!!
Thanks Bro!👍🏿
Awesome, glad it helped. Thanks for watching!
“Common fork, obviously”Never in my life have I seen this type of style fork! Nice hack forsure I’ll keep my eyes peeled for this style utensil 😂✌️🤘
Seems like a great idea and the comments support it Thanks a lot will try it!
Thanks for watching and commenting! Hope it works for you!
Man, thank you so much. This worked perfectly. Unbelievable how genius this was. Much appreciated. This works people
Glad it helped! Thanks for watching and commenting!
I have that same fork - be right back.
I went to the local dollar store and got a cheapy set of 3 forks for a dollar - and this worked for me like a charm. Although the cheapy fork looks like a pretzel on a bad hair day by the time I got the 3rd clip removed. LoL. I APPRECIATE ya doing this video! You saved me some time and some money. 👍👍👍
THIS LITERALLY is exactly what I needed!!!!! Thank you!!!!
Glad it helped, thanks for watching and commenting!
Only needed to remove one clip to replace a windshield washer nozzle and this worked great!
Glad it helped, thanks for watching!
I needed a tool, found this video and it worked great. Thanks for posting😊
Thank you so much. This hack saves me time and money. Brilliant!
Thanks for watching!
Worked like a charm! Thank you!
Glad to help, thanks for watching!
As I scrolled, this warmed my heart. Work on brother!
Thank you for this! I was struggling with a flathead screwdriver lol!
Thank you so much.. I was wondering how to remove these things.. Honestly it's a PITA, to remove many of 'em though.
You're a lifesaver
Was trying to get a 40 year off old headliner and didn't have anything to get them off,ill be damned I had a fork in the garage 😂 genius son.... it's work's... great tip and video thank you...
That's awesome! Glad it helped and thanks for watching and commenting!
Amazing beautiful idea! Works perfect for me to take clips out of toyota camry 2001. Thanks tons!
Glad it helped, thanks for watching!
Thanks so much, Man. Got a Honda skid plate I’ve had hangin’ on for dear life for MONTHS (thank you, zip ties) and now it’s time for it to go.
Gonna give this a shot since the auto store’s closed and I’m tired of bein’ a noise disturbance...😄
Glad it helped, thanks for watching!
Went in the house, bent a fork and fixed a problem that caused me 2 broken tabs. Thank you for the help.
Glad it helped, thanks for watching!
Oh Man Thank You So So Much Your Video Saved Me... Thank You For Taking Your Time Of For Us Who Really Needed This... Thanks BUNCHES. 💯🙃
Glad it helped, thanks for watching.
Thank you so much. I couldn’t find this information anywhere.
Glad it helped, thanks for watching!
This is an aewsome vid....i have been trying to figure how to DIY with out running to the store......
Glad it helped, thanks for watching!
Thanks for the tip. I was able to repair the latch flap on my 2013 Ford Fusion with just a fork
I feel so dumb for not thinking of this before myself. Lifesaver!
Thank you ! Very informative !
Glad it helped and thanks for watching!
Gonna try this on when I install my bug deflector on my ‘04 Accord tomorrow. Thanks
I did it. Great trick
For fork sakes!! That's ingenious.
"This is just a common fork..."
*shows fancy-ass fork
😏
Nothing but the best for my ride :)
Looks silver! Very fancy.
He didn't have to fork out any bucks for it either!
Amazing
Simple and effective!
Thanks again... simple...
Good tip!
Been trying pull those clips out of my jeep for 30 mins now with a flathead. THANK YOU! 2 seconds and pop out of there.
Glad to help! Thanks for watching and commenting!
This guy is smart he uses a kitchen fork instead of a fancy tool and it works! Just how to remove a bumper and fix the bumper clips ???? No one did a step by step video on that !
I occasionally add to several boxes of junk just in case. You never know when you may need a particular shape for a repair. Yard sales are a good source for old, obscure things the seller may give away,
Brilliant! Sending you a virtual beer for that hack!
That looks like an expensive fork. Don’t let the wife catch you!
You don’t know how helpful this video is🙏🏽
Glad it helped! Thanks for watching and commenting!
You forking kidding me
My fasteners refused to come out, so I said Fork You!
Great job, worked perfeclty
Thanks for watching and commenting! Glad it helped!
What The Fork! Who knew 💪🏼👍🙃
That’s a lovely fork 😅
Nothing but the best for my clips!
This trick is a crazy one! It works! Thanks.
Dr. McCoy: "It's dead, Jim...", stick a fork in it!
Thank you so much!
Barilliant!
awesome trick..thanks bro
nice fork
Girlfriend still hasn't found out I took it :)
not anymore.
How would they benefit to make it easy and affordable for the hardworking consumer who has/is paid/paying for an overpriced product to repair and/or maintain that product on their own without overriding every single part in the vehicle/product and making it very difficult to do it yourself without a special tool and knowledge.!! But thanks to you and many others with great advice,knowledge, and sometimes just an opinion on what helped for you...may go along way for others. THANKS
Yep, car manufacturers not only outsource jobs to save on labor, but they also took tax payer loans after the 2008 crisis, and still have the nerve to nickel and dime the consumer.
Great video, Hope it does the trick for me.
Just remember to twist while pulling the tab out. Thanks for watching!
Great video, very helpful, thank you
Thanks for watching!
Nice, fork worked well for me also.
Thanks for watching!
I used the fork to get it started, and a hammer claw to finish it. The fasteners on a radiator cover come out super hard.
Are you turning counterclockwise when pulling out? That seems to help when I do it.
Superb idea loved it. Thanks and keep the great working going
Thanks, much appreciated!
clever! and the manufacturer using these type of fastener are just stupid. making routine maintenance and repair so difficult. and you have to prepare for some spare rivets in your car.
Dr J悟 I agreed
Yeaj i hate those clips..tuns a 5 min job into a 30min job just trying to remove those clips
Manufacturers are penny pinchers and like making money by forcing customers to the car's dealers. Otherwise choose from a non-corporate mechanic who possibly hires ex- felons. I won't be too sad when electric cars take over.
Lol.
I think they actually made them that way to prevent them from pulling it on their own. Durability.
Also, there are no edges so you don't accidentally pry them off while doing normal things like putting big stuff in the trunk.
Worked well for me. Thanks.
Glad it helped, thanks for watching!
+Erich Schulte glad it helped, thanks for watching!
Thanks, it is very useful
Useful when I needed a quick answer. Much appreciated.
Thank you
Thanks bb
THANKS
thankss!!
Thanks for watching!
That is so not a common fork, that thing is beautiful
Only the best for my car :)
@@AFireMedia Got that right!
thats a cool fork
😏
🍴
I used some jumper cables and pulled them out
Thank you so much, this is really helpful!!!
Glad it helped, thanks for watching!
good one
This looks like MacGyver he made in during the 80s I like this I hope can make me some to buy some please
do I need to remove the part off my fork? What tools can I use as a substitution, also will it damage the screw because I don’t have replacement ones.
Your f@!$&*%× awsome dude thanks so much lol
Thanks for watching!
Do the screwed clips just screw into the car floor ?
Yep, more or less. It's not as easy as a traditional screw, but it is threaded and has to be turned in order to be pushed in.
Wow wish I would’ve found this video first. I just busted two clips.
The fork was almost designed for removing clips
Son of a gun it worked!
Aunque no entendí el idioma me sirvió el tip
How do i remove one that the head broke on????
Grab it with tweezers or needle nose pliers or drill into it
Chevy Malibu 2013 trunk clips hard to move
2014 Honda Accord as well
How do you install those clips?
They should just push back in, but may need to be turned clockwise to fully seat.
Bro I was using a flat head. This works 1milliom times better
I can see my going through a shit load of forks before I find the right one… I’ll point my angry wife in your direction. I’m sure you can take her wrath!
A fork?
Indeed, works well in a pinch.
this saved my fingers. otherwise i would have red fingers by now
Those clips can be painful without the right tool! Glad it helped, thanks for watching!
But how do you cook them and how do they taste??
Same as any mushroom but these are tougher.
If i take them out i must replace them?
As long as they are in good condition, they can be reused.
Nah just zip tie it
NICE! NOW HOW DO YOU PROPERLY PUT IT BACK IN?
I gently push in while turning slightly. I don't turn as much as I would a screw, but eventually it will find its way in and seat fully.
@@AFireMedia Thank you!
Putting them back…ugh
How did you put them back?
That is not a normal fork
True that, but I promise even the most basic of forks will work :)
How do you put them back in?
Generally, you will want to push them in slightly then turn clockwise while gently pushing inward. This should seat it fully and clip into place.
What the fork!
Those are the worst clips
What are the name of these clips I need to order some. HELPP 😱
I think they're just called mold retaining clips. Hope it helps!
How do you put it back in ?
you dont
What would I do? Get a new one?
@@zannymoss yes...some wont go back in...thats how they are designed
What a bs
Hello, I am a supplier of auto clips and removal tools from China. Do you need auto clips or removal tools?
Obviously not mans made one with a fork 🤣
@@swaelee3004 😂🤣
🤣🤣🤣
You can buy a 1 dollar flat head and cut the center out and bend to what you want also
Zack Ryan Or you can just walk in the kitchen and grab a fork.
Very poor method
It would have been more helpful without so much excess talking with the annoying Canadian accent.
Is it how you say thank you in american? :)