Does anyone know how to take the pump assembly apart to help it dry out? I separated it last year, but I cannot remember how I pushed the two tabs in at the same time so the pump assembly can be separated.
No matter how much I try to tighten the wand onto the sprayer hose, it won't tighten. I was hoping there was going to be assembly instructions, but it seems it's missing a washer or something.
@@jayn1901 I did. It does unscrew counterclockwise even though it feels like you are going to break it. The plastic handle was bending hard, but it worked.
@@cryptojoecoin5480 Apply some silicone grease to the threads to make it easier to remove. Always release the pressure first, via the pressure release knob.
I store CVT fluid in mine without issues. It’s been 1.5 years. It pumps fine. I removed the nozzle and I just use the wand and tube so idk if it can mist it. I do put my cvt fluid bottles in the sun before use but you should be fine as long as the fluid is around 50F to 105F. I dont store it on its side full though. It sits upright and depressurized inside a trash bag to prevent dust.
I just threw this hunk of junk out. It wont open back up without bending the handle like 90 degrees. Saying this thing opens "easily" is completely wrong.
this pump sprayer is terrible. I just bought two of these in less than a week and both fail to hold a seal after the first few refills. They work perfectly for the first use a refill or two but then the rubber gasket fails to hold a seal because it gets torn up by screwing the handle on and off. Either the gasket isn't durable enough or screwing the handle is a terrible design flaw. Keep your receipt to return it if this happens to you.
Don't call it a video on how to use it if it's not. So agrivating!
Are you guys kidding? You forgot to explain how to use it. Try advertising correctly instead of wasting our time.
Does it have a tube that goes to the bottom to bring the liquid to the sprayer?
I need a replacement wand. Where can I get one? Otherwise it’s pretty good.
Does anyone know how to take the pump assembly apart to help it dry out? I separated it last year, but I cannot remember how I pushed the two tabs in at the same time so the pump assembly can be separated.
No matter how much I try to tighten the wand onto the sprayer hose, it won't tighten. I was hoping there was going to be assembly instructions, but it seems it's missing a washer or something.
But how do I open it?
Twist the top
What’s the max pressure of the vessel before failure and what’s the activation pressure for the pressure release valve?
I hate videos like this. Someone gave me one of these and I need to know how to remove the top without destroying it. I know what it’s used for!
Did you ever figure it out? I’m having the same issue
@@jayn1901 I did. It does unscrew counterclockwise even though it feels like you are going to break it. The plastic handle was bending hard, but it worked.
@@cryptojoecoin5480 Apply some silicone grease to the threads to make it easier to remove. Always release the pressure first, via the pressure release knob.
@@csjr9 Good advice. Thank you!
Apple grease to the threads and also use a long stick(broom handle etc) if it is too hard to twist off with your hands 😊
Hi homedepot, is this product compatible for storing engine oil?
I think it can not. Engine oil is too viscous.
I store CVT fluid in mine without issues. It’s been 1.5 years. It pumps fine. I removed the nozzle and I just use the wand and tube so idk if it can mist it. I do put my cvt fluid bottles in the sun before use but you should be fine as long as the fluid is around 50F to 105F. I dont store it on its side full though. It sits upright and depressurized inside a trash bag to prevent dust.
I just bought one and mine didn’t have the adjustable nozzle
I just threw this hunk of junk out. It wont open back up without bending the handle like 90 degrees. Saying this thing opens "easily" is completely wrong.
Had the same issue, you’re supposed to have the pump completely down, it has these locking tabs on the pump you rotate to remove
G a r b a g e
this pump sprayer is terrible.
I just bought two of these in less than a week and both fail to hold a seal after the first few refills. They work perfectly for the first use a refill or two but then the rubber gasket fails to hold a seal because it gets torn up by screwing the handle on and off.
Either the gasket isn't durable enough or screwing the handle is a terrible design flaw.
Keep your receipt to return it if this happens to you.
Broke the first time I used and got chemical everywhere.
876 Sipes Spring
my shit is defective and the hose won’t fit in it
Zero instruction on how to set up... thank you for bringing me 98 seconds closer to death.
King Road
It's an absolute piece of garbage. It holds no pressure because the pressure relief valve doesn't hold pressure.
Walton Drives
Jennyfer Brooks
288 Meghan Shoals
What a waste of time!!!! You never showed how to use it!!!!!!
Cristal Circle
Lopez Margaret Lee Eric Lewis George
Taylor Anthony Lee Sharon Williams Jeffrey
This sprayer will be garbage in about a year, the offer no replacement parts, most importantly the check valve.
Went directly into the trash after the first use. Don’t waste your money. It’s a pos.
Didn’t learn how to set it up thumbs down o
Pos
I agree that this video is rather useless and is more of an ad endorsement for the product😢
Why on earth don’t you show how it’s put together and how to use it? Useless video.
Exactly. A video introducing nothing.
95320 Balistreri Plains
04491 Metz Pass
0581 Willie Locks