Nissan rogue tail lamp and bulb replacement
Вставка
- Опубліковано 12 вер 2024
- like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/...
thank you for your love and support
here is the like to the parts
left tail lamp: amzn.to/2IuC4Tl
right tail lamp: amzn.to/2UVdFgj
#DIY #dullahgosohard #nissanrogue
here is the like to the parts
left tail lamp: amzn.to/2IuC4Tl
right tail lamp: amzn.to/2UVdFgj
Dullah Goso hard
Good job man I love what you are doing. I have the same car same model I bought a dash cam with a backup rear camera. I wanted to connect the camera with the reverse light wire. How to get to it. I see two black big wires on the top one on the left and the other on the right
Just followed this video and replaced the brake like bulbs in my 2016 Rouge. Everything was as described in the video and my brake light replacement was a success. Many thanks 👍🏽
I am doing the same thing today!! 🤗
Thank you. I replaced the lightbulb on a Rogue 2015 thanks to your video.
Thanks for the video I have to change bulb in my kids car. I didn’t want to snap anything.
Thanks matey, just used your knowledge and video to change a blown brake light. Interesting note, what you call a Nissan Rogue, we call a Nissan X-trail in Australia.
I'm going to start calling mine an X-trail 🤣
Thx for the vid. Never know if its pull back or pull away from vehicle. So many brands do their own thing
I hit myself in the mouth with the whole light casing pulling on it because it was stuck on there 😂😂😂 but thanks man at least I got it done
😂🤣
Thanks so much! Great video fast and easy and first video at the top when I looked it up! Very helpful!
Thank you! I was trying to get the tail lamp off without removing the trim above it first.
Easy, helpful and straight forward. Thank you so much!!
Ur the man thanx for the step by step Vid, I really appreciate it. 👍🇵🇷
This answered all of my questions. Thank you!
Thank you! This video was super helpful for me today!
Thanks for the video, I plan on changing my bulbs to LED, very helpful. Can you do a video on how to access the reverse lights on how to remove the panels.
I changed out my reverse lights you just need to pull off the plastic piece on the rear hatch to access it.
this was super helpful, thank you!
Thanks bro straight to the point
Big ups King. I was able to get this done with no probs!
You must be from back home 🇻🇮
Not that home lol I'm a Jamaican
@@DULLAHGOSOHARD big ups 💯
Do you know if the 2017 to 2018 Nissan Rouge Taillight Assy will fit on the 2016 Rouge?
Thank you very much. Great DIY video and saved me $$$.
Thank you!!
Thank’s my friend !
subbed, thanx for the upload
Thank you it was so useful
You are Amazing ❤...Thank you
Thank you 😊
Great video. Thank you
Helpful!!!❤️❤️❤️❤️
Do you know if the 2017 to 2018 Nissan Rouge Taillight Assy will fit on the 2016 Rouge?
I tried to remove it just like you and mine won't budge. If I pull too hard will break?
Hi. Does anyone knows if thuse 2017+ (facelift) taillights will fit in a 2014 2015 rogue?
Thanks bud.
Thank you
What about the bulb that's in the truck door? I can't figure put how to access that 1
How about the lights on the boot door?
Awesome dude
Why dpes it look so easy to remove the assembly
Thanks
2017 model tail lights fit with 2016 model? I wanna modify taillights help me.
If it look the samevin the body yes if not no
Do you know if the 2017 to 2018 Nissan Rouge Taillight Assy will fit on the 2016 Rouge?
can i replace my 2016 tail light with a 2017 one?
Am not sure
Do you know if the 2017 to 2018 Nissan Rouge Taillight Assy will fit on the 2016 Rouge? I don't like the 2016 tail lights.
Crazy hard to pull out the bottom part. Feels like I’m going to break the light.
Make sure you remove the top part first and all the screws that hold it
First thing I did mate. Finally got it out but only after an unbelievable amount of pulling. It even damaged the light casing which cracked. In the video the one you pulled seemed to come out so easy.
Out of curiosity, I'm having the same problem, was it cold when you did this?
I feel like the plastic nubs are so hard they don't compress to exit the securing hole. I might be wrong.
Matthew Hernandez probably that was the issue. It was 5 degrees celcius couldn’t pull shit. I heated it with hairdryer and it came loose real quick
@@erikssongl9897 thank you!
Can you show me how to cut the wire and reconnect it please thank you
I need help with this too!
@@jaylenerodriguez2826 like he said cut the wires and match the colors back up with new harness.
Why changing it out.
А что изменилось?
10mm wut? I couldn’t hear it over the air machine going
what do you think lol? Wrench of socket
Como se escribe correo electrónico
Thank You!!!!
Thank you
Thank you