Hi Guys, I am here to answer your questions. Click here to subscribe for more tech videos: bit.ly/2hZ7Yfn If you want more video like this please click on the Like button.
Even though it said that there was no update available, I typed [a], [d], [v], [up arrow], [down arrow], as suggested, then installed the same version. That worked perfectly; perhaps the original firmware had become corrupted. Thanks for the fix.
I had been pulling my hair out trying to reconnect a lost connect between my Bose wireless speaker and my Android cell. This tutorial was extremely helpful and solved my issue. I am so happy I found this page. Thank you!!!
Mate, you are a life saver! Generally use mine just over summer outside and had stored away , re-powered up and the dreaded flashing red light. It was headed for the bin........... thank you so much !
The update fixed my charging problem that caused mine not to power on at all. This started after not using speaker for a couple weeks. Thought it needed battery replaced but this worked. Your video was very easy to follow. Thanks!!
Key point When it says there is no update available, you need to type the following keys: [a], [d], [v], [up arrow], [down arrow]. After that, you should be able to select a former software version.
Brilliant, finally got mine to connect and stay connected, plus I can now see it in System Sound on my Mac's. Thank you so, so much. I'm thrilled and have subscribed to your channel.
Hello. I hope you can help me. The power light on my SoundLinkMini only flashes red, but does not charge the battery. The reset on the website did not work, the site message is, "your product is up to date", but the battery still does not charge. What I can do ? Thanks in advance.
Hi my Bose minilink when switch on no announcement comes up / I went online update it that s ok ; I can factory reset , flash light / etc , but still can switch on , but no any announcement comes up ! “ battery x % connected to “ ; seems to me is more serious matter ... than just resetting as everyone is showing in you tube video / is quite new only 2 /3 years roughly . Never been used that often ,, THANKS 🙏🏽 for your help
My updater can’t detect my Soundlink mini 2 even if I choose it at „supported products“ so I can’t update the software…does anyone had the same problem?
why why why why and many many many why is my bose soundlink mini is blinking red light when its connected to usb port of my computer? why why what is wrong please help i cant update it...
I have a Bose mini soundlink one (I think) I have had the speaker for about 4ish years, and the battery will charge but only lasts about an hour. Is there anyway I can fix this or does this need to be replaced? Thanks for your time and expertise.
i get driver error for my bose mini2 but it connects to my PC well just it returns this error and it dont play any sound at all. on the bluetooth settings. instead of saying "Paired" mine say "Driver Error". can updating it fix it ?
I have the same problem with mine...worked just fine for a while and now it's displayed connected as Headset earphone (BOSE Mini2Soundlink Hand-Free AG Audio). Have you ever had other Bose products connected to your laptop via Bluetooth?
For me, it was to fix an issue where the speaker would automatically go into "shipping mode" which didn't allow you to turn on the speaker without plugging it into the wall. No matter what the battery level was. Also helps stay up to date with software on the new phones and such that come out after the model of speaker you have. So it's not really about quality as much as bug fixes.
edgar watson I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and update your device. After some attempts my bose start firmware updating and after its done it start charging normally.
you lose can you help me, my laptop doesn’t recognise that my speaker is plugged in i’ve tried different leads and plugs and used the multi function button
If you dont use it for 14 days its in the Battery Save mode. Plug the charging cable in and hold the multifuncion button for 10 seconds. After that you can do the update.
I have the newest version and have the problem, that the box shut down after 10min in AUX-Mode. Downgrade is not possible, the bose webpage shows only the newest version, also in advanced mode! The dropdown only shows 1.1.4
i have guess the first generation and i hardly used more than 3 hours, last time i used a month ago, was working fine, and today its not there is only red blinking light, i tried everything, used mute button while on charging three lights blinked and same thing happened again, never turned on, i have been trying for last 2 hours, any other suggestion please, in order to reset or update speaker should turned on, mine one not turning on at all, any suggestion please
Hi guys can please someone help me because my bose speaker cannot turn on eventhough i charge it has red blinking light only and its not charging as well. Please help. Thanks
Cecil Campillanes I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and press "Apply changes". After some attempts my bose start firmware updating and after its done it start charging normally.
Carlo Dudic I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and press "Apply changes". After some attempts my bose start firmware updating and after its done it start charging normally.
Hi Guys, I am here to answer your questions.
Click here to subscribe for more tech videos: bit.ly/2hZ7Yfn
If you want more video like this please click on the Like button.
Speaker Fanatic can I hook the mini 2, to my TV?
Hi!! thank for your help but not work with mine. When I plug in my bose only turn the red light. Help me please
Fabulous. To the point. No wasted time or talking. Thank you.
You are welcome. I'm glad you found it useful.
Even though it said that there was no update available, I typed [a], [d], [v], [up arrow], [down arrow], as suggested, then installed the same version. That worked perfectly; perhaps the original firmware had become corrupted. Thanks for the fix.
I had been pulling my hair out trying to reconnect a lost connect between my Bose wireless speaker and my Android cell.
This tutorial was extremely helpful and solved my issue. I am so happy I found this page. Thank you!!!
Mate, you are a life saver! Generally use mine just over summer outside and had stored away , re-powered up and the dreaded flashing red light. It was headed for the bin........... thank you so much !
THANK YOU!!! I thought my speaker was gone and thanks to your videos I have revived it!!!
The update fixed my charging problem that caused mine not to power on at all. This started after not using speaker for a couple weeks. Thought it needed battery replaced but this worked. Your video was very easy to follow. Thanks!!
Key point
When it says there is no update available, you need to type the following keys: [a], [d], [v], [up arrow], [down arrow]. After that, you should be able to select a former software version.
Your Bose and JBLgo2 help videos are priceless ‼️THANK YOU ‼️‼️‼️‼️
Very well crafted. My speaker now works like a champ. Thank you.
Thank you so very much!!! I was sure that my bose had just become a nice paperweight!!
I'm glad it helped.:-)
Thanks for posting update info. I tried every other fix out there and nothing helped. Back in business!
thank You very much!
Worked for my new bought Soundlink Mini now running v1.0.8
Brilliant, finally got mine to connect and stay connected, plus I can now see it in System Sound on my Mac's. Thank you so, so much. I'm thrilled and have subscribed to your channel.
hi! my computer don´t reconize the Bose SoundLink Mini, please help me!
Try another USB cable
My the same , the website Bose didn’t see my speakers!I try 4 different usb and still nothing.so sad
Thank you very much for the post! So helpful and quickly fixed my issue.
Is this normal? My new purchased Bose mini 2 SE volume is way too low. 50% volume is too low 30% volume you cant hear anything just a little bit!
Is there any difference in sound quality after the firmware update? Is it necessary to update mine? I heard that firmware update could be risky.
Thanks you very much, mine doesn't charge but now it's ok very helpful ;)
What if the site doesn't detect yur speaker..?
Same problem I'm facing. Website not detected my speaker.
The update wouldn't complete due to "can't start because battery level to low". Any suggestions??
same as me,,
Hello. I hope you can help me. The power light on my SoundLinkMini only flashes red, but does not charge the battery.
The reset on the website did not work, the site message is, "your product is up to date", but the battery still does not charge.
What I can do ?
Thanks in advance.
Thanks very much, I thought my speaker is gone, luck I found your video.
huh, two years later and still no update for the soundlink ii 1.1.4
hi ! what if the Bose website doesn't recognize the Bose when I plug it ?
TRry another cable. Not all the MicroUSB cables Charge and sync.
Thanks! I've been meaning to do this to mine, and this helped!
I try but isn't working
Thank you - so easy!
You're welcome.:-)
thanks alot,great video from you
What to do if the device didn't decteted by the installer
thank you very much for the video it helps a lot ….
Super, I'm glad it helped:-)
Should the speaker be turned on during this operation? Or off?
Just saved my speaker, tks
Thanks you very much !
Thanks for the video!
Hi my Bose minilink when switch on no announcement comes up / I went online update it that s ok ; I can factory reset , flash light / etc , but still can switch on , but no any announcement comes up ! “ battery x % connected to “ ; seems to me is more serious matter ... than just resetting as everyone is showing in you tube video / is quite new only 2 /3 years roughly . Never been used that often ,, THANKS 🙏🏽 for your help
Thank you very much
MUCH THANKS
What happen when we update this?
My updater can’t detect my Soundlink mini 2 even if I choose it at „supported products“ so I can’t update the software…does anyone had the same problem?
Yes
Mine too 😢
Thank u so Man... appreciate it
You are welcome!:-) I'm glad you found it useful.
Curiosity here, BUT what could POSSIBLY be updated about a speaker?
thank you hero
Thank you !!!
Muchas gracias capo
Thank you
I'm glad that I could help!
And what exactly does this update? Can you pair it with another mini ii?
Thank you 👍
Bose Soundlink mIni II - Green Light always ON. Help me, please !!!!!!
Hi! The upgrade stops when reach 76%, my PC has installed Win7 SP1. Thanks for the help. Regards
Brilliant thanks
Thanks, I'm glad that I could help:-)
why why why why and many many many why is my bose soundlink mini is blinking red light when its connected to usb port of my computer? why why what is wrong please help i cant update it...
Sir not working when using Oppo micro USB cable..why??
Thank you i love so much haha
very helpful!!!!
I'm glad you found it helpful.
The updater is not launching...what to do...plz help
I have a Bose mini soundlink one (I think) I have had the speaker for about 4ish years, and the battery will charge but only lasts about an hour. Is there anyway I can fix this or does this need to be replaced? Thanks for your time and expertise.
Just keep it plugged in while using
i get driver error for my bose mini2 but it connects to my PC well just it returns this error and it dont play any sound at all.
on the bluetooth settings. instead of saying "Paired" mine say "Driver Error". can updating it fix it ?
I have the same problem with mine...worked just fine for a while and now it's displayed connected as Headset earphone (BOSE Mini2Soundlink Hand-Free AG Audio). Have you ever had other Bose products connected to your laptop via Bluetooth?
thanks aloot
What did u update the speaker for? Does it play better prior to the update?
Good question, I haven't checked if the update influenced the sound quality but I did not notice much change.
For me, it was to fix an issue where the speaker would automatically go into "shipping mode" which didn't allow you to turn on the speaker without plugging it into the wall. No matter what the battery level was. Also helps stay up to date with software on the new phones and such that come out after the model of speaker you have. So it's not really about quality as much as bug fixes.
@@phatcat974 so it didn't change the sound ?
@@theotherhouse5910 no way.
Can i also use this for soundlink mini 1?
helpful
My Bose soundlink mini has failed to charge neither powering on its just brinking red light when charger is plugged in, what could be the problem?
edgar watson
I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and update your device. After some attempts my bose start firmware updating and after its done it start charging normally.
you lose can you help me, my laptop doesn’t recognise that my speaker is plugged in i’ve tried different leads and plugs and used the multi function button
WOW! appreciate this video. what a silly app.
can i update if my bose not use for long time and battery empty and can not charged .
If you dont use it for 14 days its in the Battery Save mode. Plug the charging cable in and hold the multifuncion button for 10 seconds.
After that you can do the update.
I see what the problem is. In the upper righthand corner of the updater, it says CHANGE LANGUAGE. Try that.
It's not connecting on wedsite can you explain for it's 😢😢😢😢
Same bro
Can i update using my smartphone?
NOPE, sorry
Jbl tuner MCU update video plzzz
Love form india
Also for apple?
Hello, great video! Does this firmware update help it from going into deep sleep mode? Thanks
I have the newest version and have the problem, that the box shut down after 10min in AUX-Mode. Downgrade is not possible, the bose webpage shows only the newest version, also in advanced mode! The dropdown only shows 1.1.4
i have guess the first generation and i hardly used more than 3 hours, last time i used a month ago, was working fine, and today its not there is only red blinking light, i tried everything, used mute button while on charging three lights blinked and same thing happened again, never turned on, i have been trying for last 2 hours, any other suggestion please, in order to reset or update speaker should turned on, mine one not turning on at all, any suggestion please
pm me
downgrade to version 1.1.3
How to downgrade? Same.problem
Gilbert john Capulan please tell me how to down grade because there’s no down grade option now
This update doesn't work anymore in 2022
work only for the mini 2?
I have only the mini 2 but I think the update process should be the same by the previous mini.
@@SpeakerFanatic No you can not update mini 1 by this way. Only mini 2
It’s not working on my Bose ,even the computer doesn’t see my speaker that’s why I can’t do anything!!
Can we check the firmware update on the speaker itself
No
Hi guys can please someone help me because my bose speaker cannot turn on eventhough i charge it has red blinking light only and its not charging as well. Please help. Thanks
if you bose soundlink mini 2 is already updated you need to downgrade you bose again to 1.1.3 pm me if you need help
Cecil Campillanes
I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and press "Apply changes". After some attempts my bose start firmware updating and after its done it start charging normally.
@@melchizedek1 hi there I'm wondering if you can help me with the downgrade
it doesnt work with dead bose speaker( undetected)
Soundlink mini II won’t connect to iPad Pro (which is worst buy ever anyway)
Doesn’t detect my speaker, can anyone help?
Kyle Spurgeon
Try to connect via pad
👍
How to do it in 2020?????????
Can you write it is for PC so I don't have to see half the video to discover that
My bose soundlink Mini 2 is up to date (1.1.4) but still blinking red constantly. can someone help me?
try this ua-cam.com/video/4Vs_6qMqG6E/v-deo.html
I have the same problem
downgrade to 1.1.3 simple solution
Carlo Dudic
I have the same problem. It is problem with empty battery. U need to connect your device to PC like on video and at the 1:21 press 'a', 'd', 'v', 'up arrow', 'down arrow'. After this u enter in advanced mode. Try to pick another language and/or firmware version and press "Apply changes". After some attempts my bose start firmware updating and after its done it start charging normally.
Hi! The upgrade reach at 76% it stops, my desktop has Win7 SP1. Thanks for the help
if it was only this easy for the damn Bose Wave Link Music System, smh, they don't even provide download links to burn your own update cd wtf!!!
Update bose have now removed the ADVU up down trick. Bastards.
"Not enough space on your disk"
Hope you're using a SSD xD
Thanks dude, Bose's guide was less than helpful.
not working..
Thank you !