I have a fs iA6B receiver and it does not work at all. It is not able to mix all the servo when I apply collective pitch. Only two servo moves. May I know what receiver you are using. Maybe I’m using a wrong receiver. Please reply. I really need this urgently. Thanks for your understanding.
Select 140 or 120 swash mix dont select variable or collective . For FBL Helicopter select variable pitch .....still more doubt .....whatsapp to me a video
Hi @Sambeet M. Some of my friend said use ppm funtion means all servo and throttle connect to gyro. Is it possible to do that on this i6ab receiver because right now i'm using this fs i6 tx and i6ab rx. I try to figure it out but seems not working. I'm using robird G31 gyro. Thanks in advance
TheBoteboyz. Fsi6b will work you need to select "variable pitch "model and program the gyro i have videos which you can see. ua-cam.com/video/70o6ewIuA2I/v-deo.html
i tried to setup like you told before but doesn"t seem working. Now i"m confused whether ppm output should on or not and when setup the gyro should select pwm type or ppm. When i select pwm only aileron is working. Anything else does not. But when i select ppm type all not working. Do you know how?
drestarss yes you can ....there are two modes in pitch setting "normal" and "sports" you set in sport mode negative setting.... Just you need to use mode switch ... Just above throttle stick
I have a tarot 450 with a fs-iA6B receiver flysky i6 receiver already installed. but on the lever for the ailerons and elevators it looks like upside down which should be an aileron channel here into an elevator and vice versa. how should I adjust the aileron and elevator functions in order to function accordingly? thank you
Pauzan Ozan. You need to connect in receiver Ch2 for elevator servo Ch1 for aileron left servo Ch3 for esc and motor ( throttle) Ch4 for tail servo and gyro Ch5 gyro gain Ch6 for aileron right servo .
thanks for telling me how to connect the correct servo, then I will try to adjust the channel as you tell. to pin receiver to gyro I do not understand. I know new world rc helicopter especially
From tarot xyz s2 Connect channel 3 of tarot to elevator servo . Connect channel 2 to left servo for Aileron. Connect channel 1 to right servo for Aileron. Connect channel 4 to tail servo . Connect Ail channel of gyro to channel 1 of receiver Connect Rud channel to channel 4 of receiver. Connect Aux 3 single pins wire to orange or white to ch6 in receiver , brown to ch5 of receiver, red to ch2 of receiver REMEMBER: FIRST CONNECT SERVOs AND SETUP GYRO , AFTER THAT CONNECT ARMS TO SERVO AND THEN FIX TO HELICOPTER .......ALL THE BEST .....
Cuba tukar "120 pitch" ke "variable pitch" kat transmitter lepastu kena try setup kat gyro software. Saya setup ok tapi ade 1 masalah bile pakai "variable pitch" nie. stick transmitter utk forward and backward terbalik. Bile push stick forward swatch plate dlm posisi backward...
Like everything working perfact just blades not going right way moving down instead of up for to take off like if the HELI was upside down it fly that way lol
No not this setup, goto select model and select airplane mode . if you are using kk2.1 board or any other , to arm you need to move rudder to left and ailerons to right (HOLD IT) ,it will give ARMED message in kk2.1 board screen . Hope now you can setup and fly , Goodluck. FSi6 Transmitter can be used for QUADCOPTER, HEXACOPTER , RC HELICOPTER WITH OR WITHOUT FLYBAR 450 or any higher model , RC AIRPLANE.
we use multiwii 2.4 control board for quad copter .for control board any changes want to done .I have some problem to arm the transmitter can you help me
ua-cam.com/video/R-UtQNCMMq0/v-deo.html ,quadcopter flying with kk2.1 with same flysky i6 transmitter. ua-cam.com/video/KU2j7p_3ZTc/v-deo.html quadcopter flying with same Flysky i6 transmitter. ua-cam.com/video/GZK3VCfLs6Q/v-deo.html Flybarless Helicopter flying
The receiver I am using is avionix 9 channel taken it from rcbazar Pune The heli I have taken it from Mumbai I am not getting the setting in avionix for no mix for swashplate Any idea what setting I need to do for avonix transmitter And the other thing is that the avoinic flybarless is not going on flybarless every time I do the setting it is only on tale gyro So plz if u can help to do the setting for my heli 480 nitro Hiller And can I have ur contact number so that I can send to the issue I am facing in my heli
ua-cam.com/video/2H4lZO9vRl0/v-deo.html WATCH THIS VIDEO ......... UPGRADED PARTS TO FLYBARLESS HELICOPTER ....... this helicopter setup in only for FLYBAR HELICOPTER
Helped me set up my uh-1 thank you
Thank you
I have a fs iA6B receiver and it does not work at all. It is not able to mix all the servo when I apply collective pitch. Only two servo moves. May I know what receiver you are using. Maybe I’m using a wrong receiver. Please reply. I really need this urgently. Thanks for your understanding.
Select 140 or 120 swash mix dont select variable or collective . For FBL Helicopter select variable pitch .....still more doubt .....whatsapp to me a video
Sambeet M okay thank you very much. I will try what u have suggested later. Thanks
Sambeet M by the way my servos are set up in a way that there is one servo for the front and two for the back. Wonder if this helped. Thanks
Ok, welcome
Sambeet M have you added me?
Hi I have it setup same way as u but the blades move down when I give it pitch means not going to take off what fly sky receiver u useing
Hi buddy when all the servo is connected my receiver blink fast and not connected to transmitter plz plz help
Beautiful video helped me a lot. Thank you 🙏 so much I owe you a lot.
I found very educational.😀
Most welcome , thank you for your appreciation
Hi, you can tell me how to set up a flybar-free radio-controlled helicopter like the Trex 300x?
Oi, por favor, copiei seu setup, e meu heli não tem passo negativo pra fazer vôo invertido, alguma sugestão?
Beautiful helicopter. I really enjoyed your video. Very educational and informative.
I needed to know something about the swashplate.
Ok, let me know
Hi @Sambeet M. Some of my friend said use ppm funtion means all servo and throttle connect to gyro. Is it possible to do that on this i6ab receiver because right now i'm using this fs i6 tx and i6ab rx. I try to figure it out but seems not working. I'm using robird G31 gyro. Thanks in advance
TheBoteboyz. Fsi6b will work you need to select "variable pitch "model and program the gyro i have videos which you can see. ua-cam.com/video/70o6ewIuA2I/v-deo.html
Sambeet M thanks for reply. Variable pitch??? Is it setup on transmitter?? Btw thanks again esspcailly for the info. Will try soon. 👍👍👍
TheBoteboyz yes
i tried to setup like you told before but doesn"t seem working. Now i"m confused whether ppm output should on or not and when setup the gyro should select pwm type or ppm. When i select pwm only aileron is working. Anything else does not. But when i select ppm type all not working. Do you know how?
And confused about swashplate direction. If forward what is swashplate position
Hola amigo yo tengo el mismo control! Y aling trex 450 como hago las conexiones en el recibidor
Can you fly negative pitch inverted flight setup with the flysky transmitter?
drestarss yes you can ....there are two modes in pitch setting "normal" and "sports" you set in sport mode negative setting.... Just you need to use mode switch ... Just above throttle stick
I have a tarot 450 with a fs-iA6B receiver flysky i6 receiver already installed. but on the lever for the ailerons and elevators it looks like upside down which should be an aileron channel here into an elevator and vice versa. how should I adjust the aileron and elevator functions in order to function accordingly? thank you
Pauzan Ozan. You need to connect in receiver
Ch2 for elevator servo
Ch1 for aileron left servo
Ch3 for esc and motor ( throttle)
Ch4 for tail servo and gyro
Ch5 gyro gain
Ch6 for aileron right servo .
Pauzan Ozan tarot xyz 3 axis gyro connection need to connect same pins to receiver
thanks for telling me how to connect the correct servo, then I will try to adjust the channel as you tell. to pin receiver to gyro I do not understand. I know new world rc helicopter especially
From tarot xyz s2
Connect channel 3 of tarot to elevator servo .
Connect channel 2 to left servo for Aileron.
Connect channel 1 to right servo for Aileron.
Connect channel 4 to tail servo .
Connect Ail channel of gyro to channel 1 of receiver
Connect Rud channel to channel 4 of receiver.
Connect Aux 3 single pins wire to orange or white to ch6 in receiver , brown to ch5 of receiver, red to ch2 of receiver
REMEMBER: FIRST CONNECT SERVOs AND SETUP GYRO , AFTER THAT CONNECT ARMS TO SERVO AND THEN FIX TO HELICOPTER .......ALL THE BEST .....
okay thank you. if I have not succeeded, I will again ask you this. hopefully you do not get bored to teach me
Very helpful video, thanks for posting it up.
Welcome
Tail gyro is working fine
O meu rádio quando aciona a chave d fica todos os comandos bloqueados, ou seja, eu desligo o motor e perde o controle, o seu também?
Hi friend .....this setup is only for flybar ...helicopter..... Now i am flying flybarless helicopter ....with 3 axis gyro ......
So please follow my other videos accordingly
Very useful. Thanks 👍
oh ya saya lupa untuk gyro saya menggunakan tarot ZYX s2
bikin fidio untuk bahasa indonesia dong
Cuba tukar "120 pitch" ke "variable pitch" kat transmitter lepastu kena try setup kat gyro software. Saya setup ok tapi ade 1 masalah bile pakai "variable pitch" nie. stick transmitter utk forward and backward terbalik. Bile push stick forward swatch plate dlm posisi backward...
@@TheBoteboyz reverse channel Elevator di TX
Like everything working perfact just blades not going right way moving down instead of up for to take off like if the HELI was upside down it fly that way lol
Check servo setup in transmitter
Hi I got it right now thanks
I want to arm the transmitter for quad copter . I am using flysky i6 transmitter .I can use this setup for my quad ??pls replay to me ...
No not this setup, goto select model and select airplane mode . if you are using kk2.1 board or any other , to arm you need to move rudder to left and ailerons to right (HOLD IT) ,it will give ARMED message in kk2.1 board screen . Hope now you can setup and fly , Goodluck. FSi6 Transmitter can be used for QUADCOPTER, HEXACOPTER , RC HELICOPTER WITH OR WITHOUT FLYBAR 450 or any higher model , RC AIRPLANE.
we use multiwii 2.4 control board for quad copter .for control board any changes want to done .I have some problem to arm the transmitter can you help me
Yes sure will help you out add my number to Whatsapp and help you out
ua-cam.com/video/R-UtQNCMMq0/v-deo.html ,quadcopter flying with kk2.1 with same flysky i6 transmitter.
ua-cam.com/video/KU2j7p_3ZTc/v-deo.html quadcopter flying with same Flysky i6 transmitter.
ua-cam.com/video/GZK3VCfLs6Q/v-deo.html Flybarless Helicopter flying
wonderful
any query ?? comment below
Thank you for watching ......
The receiver I am using is avionix 9 channel taken it from rcbazar Pune
The heli I have taken it from Mumbai
I am not getting the setting in avionix for no mix for swashplate
Any idea what setting I need to do for avonix transmitter
And the other thing is that the avoinic flybarless is not going on flybarless every time I do the setting it is only on tale gyro
So plz if u can help to do the setting for my heli 480 nitro Hiller
And can I have ur contact number so that I can send to the issue I am facing in my heli
But I am facing some issues to setup the avoinic X5
Hlo sir I have syma S33 RC helicopter but not with transmitter but I have flysky fsi6 transmitter can I bind with that please reply me sir please 😭😭😭😭
No it won't
sorry i forgot translite .. for my gyro use tarot ZYX s2
Irritating flash effect 😬 further videos pls stop it..😊 gd stuff dude🤝🏻
Ok
Excellent
great
Seems a good video but I wish you would have someone do the voice over in clear English.
Rolling "r's" and hard to understand slang makes it unusable.
Ok
Hey I just buy the heli 480 nitro
Please help me
Will do ....whatsapp to me a video of your problem
This setup is only for flybar heli
Setap para heli flaybarless
ua-cam.com/video/2H4lZO9vRl0/v-deo.html WATCH THIS VIDEO ......... UPGRADED PARTS TO FLYBARLESS HELICOPTER ....... this helicopter setup in only for FLYBAR HELICOPTER