The noise is not a problem at all because the engine is louder than those fans anyways. Heat maybe a problem…Were you able to put the dust cover on the driver side? Also any heating issues?
Just used this brand in my 17hrv, literal night and day from halogen to led, I’ve used auxito before in other vehicles have had good life from them, great video, the hb4 for my hrv also supported drl
I just gave up on Osram H4 LED "direct" replacement bulbs as they are 2mm wider in the front and in the back and can not install them because of that. Are these IDENTICAL in dimensions compared to halogens?
Hi, yes I do have DRLs and they work great! My CRV uses a 9003-type bulb, so the high-beam strip of LEDs is on during the day at a lesser intensity. Works the same as the OEM/ filament bulb.
I have these and i am extremely happy with my low beams, they are very bright and crisp, but I am a bit off when using high beams as the light is ''too pale and dim'' and beam is scattered almost everywhere with mere focus just 100 m ahead of the car. I do not know if i can improve on this somehoiw. It's H4 reflector lights housing.
I have a motorcycle that has two bulbs, my head is about 2 1/2 feet from these bulbs, and with motorcycle off, you can BARELY hear these bulbs.... the buzzing from a fly at the same distance would be more annoying. These lapel mics that a lot of youtubers use are auto leveling..... they adjust for louder and softer sounds, so when he stops talking, it automatically makes quiet sounds louder, to try to keep volume levels consistent. The bulbs are nowhere near that loud.
From what I read from Amazon reviews , most cars are plug and play. Some people said they had issues and auxito sent them a plug in resistor for free , that solved the issues they were having. I expect to recieve my lights this weekend.
I have ordered these but I am concerned about the fact that the entire heat producing part of the bulb is inside the headlight enclosure vs the normal design where the fan and heat producing electronics are outside the headlight enclosure. Does the inside of the enclosure get considerably hotter with this bulb than other LED bulbs, causing damage to the housing itself? Any long term owners have any bad experiences with this bulb?
Installed these last week in my Tundra. Super simple installation, like changing a halogen bulb. Took a late night drive in the country. Very bright, very white light. Great beam pattern on low beam, slightly scattered on high beam but not objectionable. So far, so great! Best $60 I have spent in a while.
@@Dano-MX5 if you have a good alignment of lights, no one bothers you. this leds are very good. Dont use high beam in the road kkkkkkk , low beam is just fine kkkkk, in the field use and abuse high beam kkkk.
it looks much much brighter on camera..try record with your phone and compare to how you see it in real and youll see how much brighter it looks on your phone...
@@DeeSnutts hey bro thanks for all you help...one thing tho...do you know if it possible to run these h4 bulbs with both beams on at the same time possible...can u enlighten me on that....thanks
Kevin i have a nissan march( micra) and 0 problems , i belive the problem it came for BMWs and mercedes, you mast use H4, Auxito have H7 too, but im sure your car is H4
LEDs work perfectly fine in reflector housings dummy you just have to install it in the 9 and 3 o’clock position and make sure they are aimed correctly, you see the cutoff line he has its perfectly fine
people just need to learn how to adjust their beams. from the evidence of your ignorance, you would be one of those people who blind others. so LEDs are definitely not for you. stay far away
The noise is not a problem at all because the engine is louder than those fans anyways.
Heat maybe a problem…Were you able to put the dust cover on the driver side? Also any heating issues?
Mr.III the night road test convinced me, I just placed my order... Congratulations for this great demonstration.
Glad my video was helpful to you! You'll be shocked by the difference in lighting when upgrading to LEDs. Thanks for the comment!
Did these bulbs last long? If so, how long?
Just used this brand in my 17hrv, literal night and day from halogen to led, I’ve used auxito before in other vehicles have had good life from them, great video, the hb4 for my hrv also supported drl
I just gave up on Osram H4 LED "direct" replacement bulbs as they are 2mm wider in the front and in the back and can not install them because of that. Are these IDENTICAL in dimensions compared to halogens?
Amazing how they don't need all those LED stuff (huge fans and those black boxes) it's like an halogen lamp. Wonder if the lifespan is good.
I agree and so far they are still working today! That CR-V is my daily driver.
Wondering. Do you have daytime running lights? If so, do they work?
Hi, yes I do have DRLs and they work great! My CRV uses a 9003-type bulb, so the high-beam strip of LEDs is on during the day at a lesser intensity. Works the same as the OEM/ filament bulb.
@@MrIII Thank you. Knowing this is a great help. :)
I have these and i am extremely happy with my low beams, they are very bright and crisp, but I am a bit off when using high beams as the light is ''too pale and dim'' and beam is scattered almost everywhere with mere focus just 100 m ahead of the car. I do not know if i can improve on this somehoiw. It's H4 reflector lights housing.
Is that a honda crv you fitted them in?
Yes it is! 2011 SE
I have a motorcycle that has two bulbs, my head is about 2 1/2 feet from these bulbs, and with motorcycle off, you can BARELY hear these bulbs.... the buzzing from a fly at the same distance would be more annoying. These lapel mics that a lot of youtubers use are auto leveling..... they adjust for louder and softer sounds, so when he stops talking, it automatically makes quiet sounds louder, to try to keep volume levels consistent. The bulbs are nowhere near that loud.
Is just plug and play or needs a resisistor or anything else?
From what I read from Amazon reviews , most cars are plug and play. Some people said they had issues and auxito sent them a plug in resistor for free , that solved the issues they were having. I expect to recieve my lights this weekend.
I have ordered these but I am concerned about the fact that the entire heat producing part of the bulb is inside the headlight enclosure vs the normal design where the fan and heat producing electronics are outside the headlight enclosure. Does the inside of the enclosure get considerably hotter with this bulb than other LED bulbs, causing damage to the housing itself? Any long term owners have any bad experiences with this bulb?
I use this leds about 3 years and no heat inside, i just love this 9003 Auxito leds, i use in my car and in my bike
Installed these last week in my Tundra. Super simple installation, like changing a halogen bulb. Took a late night drive in the country. Very bright, very white light. Great beam pattern on low beam, slightly scattered on high beam but not objectionable. So far, so great! Best $60 I have spent in a while.
@@Dano-MX5 if you have a good alignment of lights, no one bothers you. this leds are very good. Dont use high beam in the road kkkkkkk , low beam is just fine kkkkk, in the field use and abuse high beam kkkk.
The housing will most likely be fine.. oem halogen bulbs are 55w and run much hotter than any led.
Los focos halogenos trabajan a altísimo temperatura y van dentro de la lámpara, y la misma resiste así que no se preocupe
Is it good in rainy season?
no LEDs or Xenons are good when its raining..best is yellow light when it rains...
Willl those fit my 2011 srx?
Jeep patriot 2015 h13 ? in bay?
I think you need to aim your lights higher. Almost no light hits the sides, just downwards .
that's where the light's supposed to go... wtf are you trying to point it to? mars?
@@360.Tapestrywtf is your problem Ah ole??
@@crs1474 i see you totally missed the point. no wonder you point the light in the wrong place lmao
@@360.Tapestrynext time I’ll ask your mom which direction she wants me to point something else at 🤡
@@crs1474 doesn't surprise me. you're too stupid to know where anything goes
Wow that is very bright light. I cant even c whr im going with my stock lights.
it looks much much brighter on camera..try record with your phone and compare to how you see it in real and youll see how much brighter it looks on your phone...
Very nice
Does canbus decoder work?
Yes, it works perfectly! Uploaded a video too about it
How do you remove the buzzing sound?
You can't, unless you buy the fan less style with just a heat sink
Turn up the radio 😂
good advice 😂
I bought this 2 weeks ago.. works very well...can u do a vid on adjusting the reflector housing
What type of adjustment? Moving the beam pattern up or down?
@@MrIII yes that exactly...cause th light beam shows a bit too high
@@anextday it’s in your car manual or search online model year
@@DeeSnutts thanks bro
@@DeeSnutts hey bro thanks for all you help...one thing tho...do you know if it possible to run these h4 bulbs with both beams on at the same time possible...can u enlighten me on that....thanks
Why isn’t fit in nissan versa
Does your car use a h4/9003 blub? And what doesn't fit? The connector
Kevin i have a nissan march( micra) and 0 problems , i belive the problem it came for BMWs and mercedes, you mast use H4, Auxito have H7 too, but im sure your car is H4
Combien ça court 'il
😇 ᵖʳᵒᵐᵒˢᵐ
So you blind the fk out of people with reflector housings. 👌
LEDs work perfectly fine in reflector housings dummy you just have to install it in the 9 and 3 o’clock position and make sure they are aimed correctly, you see the cutoff line he has its perfectly fine
people just need to learn how to adjust their beams. from the evidence of your ignorance, you would be one of those people who blind others. so LEDs are definitely not for you. stay far away
Слепят они... Стг есть.. Но засветы дикие