can't wait to try this idea this sunday! controlling the bass tone is so hard no matter how I tried to fix the sound and control the frequency. I hope I can try this works!
@@CharlesBautistaMusic hey there! I've been using the method you taught me through the video for less than 6 months now! it's been a great help as it gave me more freedom to calibrate my bass tune! really thankful for the tips! I only struggle on my bass atm as I think I let the smith to action my bass too low or I'm not used to it because I've been using a standard action for 5 years now haha that aside, Thank you for the tips! may your channel grow more! God bless!
Thanks sa tips bro! Probably worth noting that most amps will have a pre/post switch on the DI/XLR out. In this setup, im assuming you are using the post eq selection on the DI out to send to FOH?
Thank you for pointing that out! Yes this is important to note that it should be set to post-EQ to be able to do the setup on this video. I would think that setting the xlr out to pre-eq, will give you no signal. Because fx loop is placed after the EQ section 👌
@@CharlesBautistaMusic exactly my thoughts bro. Kasi yung pre-eq na DI out yung input signal lang so wala ring lalabas at walang nakasak2 sa input ng amp.
try ko nga po ito sa RJ na amp sa church. Meron syang return/send. Eto din naging prob ko eh kapag nasa church na parang sabog ang tunog ko kahit naka flat lang ang eq ng amp. Salamat po dito!
@@CharlesBautistaMusic I'm not sure if lumang version na to. Yung mga nasa online 50W 1x12 eh. Itong gamit namin parang 40w 1x10 lang sya. Meron syang two inputs (low/high), Aural enhancer, bass, mid, treble, effects blend and master. Ta[ps yung effects loop return/send. Tapos isang phone. Bali dalawang ganito ang meron kami. So i-setup ko sya, from bass > preamp/effects pedal to main amp return > main amp send to second amp return.
Thank you sir ❤😊
Thankyou sir. Eto yung madalas na problema ko lalo na sa open area na gig
Ito tlga ung problema. Salamat sir Charles!
thank you bro. sa info. makaling tulong ito. God Bless
can't wait to try this idea this sunday! controlling the bass tone is so hard no matter how I tried to fix the sound and control the frequency. I hope I can try this works!
How’s it going for you?
@@CharlesBautistaMusic hey there! I've been using the method you taught me through the video for less than 6 months now! it's been a great help as it gave me more freedom to calibrate my bass tune! really thankful for the tips! I only struggle on my bass atm as I think I let the smith to action my bass too low or I'm not used to it because I've been using a standard action for 5 years now haha that aside, Thank you for the tips! may your channel grow more! God bless!
Thank you bro! God Bless
Mismo sir! Salamat sa mga kaalaman. 😊
Salamat po sir Charles sa info
Ayus. Ginagawa ko din to. Hehe
Salamat
Thanks sa tips bro! Probably worth noting that most amps will have a pre/post switch on the DI/XLR out. In this setup, im assuming you are using the post eq selection on the DI out to send to FOH?
Thank you for pointing that out! Yes this is important to note that it should be set to post-EQ to be able to do the setup on this video. I would think that setting the xlr out to pre-eq, will give you no signal. Because fx loop is placed after the EQ section 👌
@@CharlesBautistaMusic exactly my thoughts bro. Kasi yung pre-eq na DI out yung input signal lang so wala ring lalabas at walang nakasak2 sa input ng amp.
Hello sir about sa hx stomp, kung okay lang po sa inyo, pwde po malaman kung san kayo nag order? If galing sa labas, paano po kaya?
try ko nga po ito sa RJ na amp sa church. Meron syang return/send. Eto din naging prob ko eh kapag nasa church na parang sabog ang tunog ko kahit naka flat lang ang eq ng amp. Salamat po dito!
Okay bro. Let me know ano magiging result for you :)
@@CharlesBautistaMusicmas ok yung tone kaso mejo mahina volume ko. Kahit sagad na sa amp, pre amp saka volume knob ng bass :(
@@johnmarkbetes3966 ok. Anong model ng RJ Amp gamit mo?
Now, dahil dito sa send/return. Napunta ako sa amp slaving. Meron kaming dalawang 40w bass amp sa church. Try ko if much better sya naka slave.
@@CharlesBautistaMusic I'm not sure if lumang version na to. Yung mga nasa online 50W 1x12 eh. Itong gamit namin parang 40w 1x10 lang sya. Meron syang two inputs (low/high), Aural enhancer, bass, mid, treble, effects blend and master. Ta[ps yung effects loop return/send. Tapos isang phone. Bali dalawang ganito ang meron kami. So i-setup ko sya, from bass > preamp/effects pedal to main amp return > main amp send to second amp return.
Sir okay lang po kung may provided akong d.i. Tapos saksak ko padin siya sa return. Then yung out sa FOH galing sa mismong d.i. Ko at hindi sa amp
Yes that’s also a another good way to do it :)
Sir, yung out po nyan yung mismong DI ng amp? Same ba lalabas ng tunog sa FOH? Or sa send kukuha ng out going to separate DI box papuntang FOH?
Hello bro! XLR out ng amp head to FOH :)
Pano kung walang return ung amp sir?
you can just use a DI and have a wedge speaker as your monitor. But, if you like the amp provided by all means use it! :D