Jeep Grand Cherokee Dash and Shifter Removal (2014-2020)
Вставка
- Опубліковано 24 сер 2024
- A Quick an Simple Video on How to Remove Jeep Grand Cherokee Dash and Shifter (2014-2020)
This Vehicle is Equipped With a Monostable Shifter Which is Only in the 2014-2015 Models.
*It Requires a T30 to Remove*
***Clip Locations/Diagram***
Uconnect Bezel: 1:01-1:05
Shifter Trim: 2:57-3:01
Here is a Trim and Tool Kit Link for Anyone Who Has Trouble Prying With Fingers:
www.amazon.com....
2021 Everything Cars/GMak Entertainment©
Edited By:
/ @gmentertainment4975
NOTE: Disconnect battery before you begin.
Disclaimer:
Due to factors beyond the control of Everything Cars, I cannot guarantee against improper use or unauthorized modifications of this information. Everything Cars assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Everything Cars recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Everything Cars, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Everything Cars.
Simple with music and straight to the point. Thumbs up 👍
Every vehicle fix video should be like this one
I probably watched 14 videos before this one, got annoyed and almost abandoned my project. Great job!
Glad you found the video helpful
I'm still waiting for the rest of the video where u remove the dash. All u did was remove the mono shifter and part of the center console
Exactly what I needed for the center console. Thank you!!
Man such a clean simple vid, much appreciated
great video, straight to the point, did this early morning and ready to wrap !
I know where I’m hiding my bud on beach trips now 😅
I love this video... Quick and helpful.
You rock man, now I can replace mine
Great video. Thank you
Great video, need to do this to fix a sticky gear shifter.
Thanks, I had to order a new cup holder because of a leak I had in one of the cups I was using.. LED got borked.
I finally have time to do this project, did you have to disconnect the battery?
Is there one on how to remove cluster panel? Thansk
Thank you
Is there a way to remove that little flip door that is right below the dash? Mine is open all the time, I’d like to just remove it if I can
I would like to know this as well.
If you don't want to save the door, then cut the door itself in half and discard. Problem solved.😊
Thanks for the video. Can you tell me if you are able to remove the chrome trim of the cup holders? Mine is peeling and would like to know if I can just replace the chrome or I have to replace the entire center piece. Thanks again
I believe you need to replace the whole center piece, but you can try by removing the shifter bezel, disconnecting the wiring harnesses, flip the shifter bezel over and you should see four screws holding the cup holders to the shifter bezel. Remove those screws and you should have access to your chrome cup holder ring. Thanks for Watching!
Do you have a full dash removal steering wheel and all I’m having some troubles
Can you upgrade the monoshifter to the 2016 one?
Thanks!
I love this video!!!
Algún video de como se remueve la consola trasera? Necesito cambiar unos botones . Gracias
So, I know in older Jeep Grand Cherokees (and other Jeeps) if you removed the HVAC panel and replaced it again and some of the knobs were repositioned, then the blend doors would fail and you had to perform a series of button presses to reset the system and recalibrate it. Is this necessary in the newer ones?
Helped me a lot. Appreciate 👍
Is the 2011 jeep grand cherokee larado the same proses
The cup holder lights on my 2017 Jeep Grand Cherokee stopped working. Do I need to replace the whole console or is it possible to replace the section with the burned out lights? Great video! Thank you.
Yes it is possible here is a link that might help you. Thanks for watching! www.ebay.com/itm/143396237208?hash=item216314ef98:g:lUEAAOSwksJdjkIC
@@EverythingCars Very helpful! Thanks Again!!
Where's the rest of the video?
Very interesting thanks
I have the 2014 srt with this shifter an i hate it..i brought the 2018 srt shifter is it easy to put in like this is
If you purchase the entire shifter assembly it SHOULD be as simple as removing the shifter bezel, locating the shifter assembly, removing the wiring harness and 4 bolts securing the mono shifter assembly and replacing it with the new assembly that you have purchased. Also, I am not sure if it needs to be programmed to the vehicle. I have not replaced the mono shifter in this vehicle. Thanks for watching
❤❤❤thank you so much❤❤❤!!!!
Does the gray around the side vents and around the door handles come off?
Yes they do thank you for watching
@@EverythingCars can it be done without removing the door panel
I don't believe so
Can you access the yaw sensor control module?
The yaw rate sensor is usually located under the driver or passenger seat of the vehicle mounted on the level floorboard in order to access the vehicle's center of gravity. Thanks for Watching!!
This video is incorrect for the 2019 and 2020 Jeep Grand Cherokee ( and possibly the 2017- 2018, not sure). The shifter is completely different, and connot be removed from the top as shown.
The video is correct at 01:31 it says it only for 14,15 model years also mentioned in the description
@@EverythingCars the description i see claims 2014 thru 2020.
.
You didn't even remove the dash
Did you need to disconnect the battery at all ?
It's recommended procedure to disconnect your car battery before making any electrical changes.
This is a good safety measure because an accidental short could take place while making changes.
In reality you can often disconnect something like the radio without much risk of damage and speakers are extremely low risk since they are not connected directly to the battery.But it is so much better to be safe and disconnect the battery. There's a .01% chance something could go wrong but it is better to be safe than sorry. Thanks for Watching!!
The title says dash removal but all you did was take out the center console