Why remove so much? All u need to do is pop offprdl bezel, Pull up slightly on back of black bezel and reach down and unplug. You're creating too much bs to deal with. There's also numerous videos that will show you a better efficient way than this video
I recommend that instead of paying that amount of money, you just remove the electronic module from the base (it's super easy) and look at it against the light since the pins where you assemble the harness go down to the green plate and are only soldered on. individual tracks, it is advisable to release them completely, clean the solder plate (tin) and re-solder that will prevent you from making a greater expense and it will be like new. The cost of the materials is 10 dollars. Do it yourself and it will be like new again. .I did it in my 2018 latitude jeep
What if you have a 2014 2wd doing the same thing. Haven’t put it on a code reader yet. But I would think it’s the same thing unless Jeep changed something after 2014
I swapped mine out but I didnt replace the wiring harness, I just plugged the old connector to the new bezel and I haven't had the service shifter light come on for months now. I'll keep it on hand in case it comes back but it might save folks an extra step.
Dave - Always amazing - I have a Gladiator 2022 - Pentastar - like hearing about my Truck - BUT all of your videos are EXCELLENT - You have another SUB -
great video so detailed instructions appreciate that..thank you but at the end clear code how you do that im diy the shifter service comes on once in awhile not all the time is that what you mean about code
Sometimes you can disconnect the battery and reconnect. Typically if the issue is fixed the light will eventually go off and after awhile the code will disappear. Otherwise might be able to get the local parts store to clear it….unless it’s against their policy
Will this work on the 2014 model? Thanks Ps... update this worked great , and now I'm actually getting better gas milage and my cherokee is running way better. Used to constantly down shift at the slightest upgrade, now it doesn't. Love this.
Thank you very much. The video is very detailed without over complicating things.... perfect and thank you! Step by step - and you saved me over 1200! Great job again, Thanks!
Hi Dave, I have a problem on my Pt Cruiser 2002 Automatic transmission. The problem is: The backup lights Doesn't work. The bulb and fuse are ok..what do you think could be wrong. Thank you 4 your help.
Will this process work to remove the service shifter display on a 2014 Trailhawk 3.2L for error codes U0103-00 and U1465-00? I do not have the error code P1C86-1D.
Could you help me please. Im trying to torque down the flex plate to torque converter in an 2011 vw routnan . I have read on line and have seen 3 different answers. Thank you.
Not related but can you direct me to on any issues or diagnostics of a 2019 Jeep Wrangler 3.6 with ess battery not charging properly ? Can these be deleted ?
Now that we know how to change it. What actually happened to the old one? Visually you see nothing wrong, and there’s no moving parts. Is a defective manufactured part are what?
Question, I have a 2015 that still looks new but the PRNDL bezel looks worn and I really want to replace it. I assume I follow the same steps but I won’t have to remove as much since I’m not digging for the bottom wire connector but just replacing the top? Thank you! Really appreciate how thorough, clear and concise you were in this video.
Hi and thanks for this info-was there a recall for this? This happened to me just the other day and all the lights lit up on the gear shift panel and I did get the Service Shifter alert on the dashboard. I thought this might have been a transmission problem or something to do with changing the differential fluid.
Hello David, any chance on doing a video for replacing the eight speed rotary switch for dodge ram pick up truck? Numerous times I've gone out to start the truck up put my foot on the brake and the selector switch is stuck in park will not turn. After numerous attempts, it finally going to drive.
I want to thank you for the information you gave on changing out the shifter cable and parts I had a 2018 Jeep Cherokee your instructions made it so easy that it only took me less than 30 minutes to replace the parts and they work just like they should be on a brand-new😀😀 car thank you very much Godspeed.
Thanks sir for the description and part names and dismantling, and installation. Great video for us , me Diy'er five years learning automive's and I still consider myself a beginner, so much to learn, but I love automotives.
Just checked and working fine on my end. It’s a generic link and not for any specific item. If you look at the link at the top of that Amazon page you will see the channel name buried in it.
I just replaced my shifter bezel and wiring harness today on my 2014 Jeep Cherokee Trailhawk. This tutorial is definitely worth watching, excellent instructions! I was really surprised to see the interface between the old wiring harness and the shifter bezel? Doomed to fail? Thank you for your help on this!
Hi Tim, could you tell me what the symptoms were on your Jeep? I have a 2014 Jeep Cherokee Trailhawk 3.2 and can't get it into four wheel drive anymore. I am getting the U1465 code. Any info would be greatly appreciated. Thanks, Joe
Hi Joe, I was not receiving a code on my scanner. The display read service shifter continuously. My Jeep ran perfectly fine, no issues with four wheel drive. I've had issues with my four wheel drive but it was an issue with the Power Transfer Unit (PTU). It might be a faulty signal with your PRND bezel? It's a relatively cheap fix to start with? @@JosephIrizarry-er1uf
Why remove so much?
All u need to do is pop offprdl bezel,
Pull up slightly on back of black bezel and reach down and unplug.
You're creating too much bs to deal with.
There's also numerous videos that will show you a better efficient way than this video
This definitely helped me, I literally went to Jeep and bought these parts and just fixed it on my own. Thank you!
Any chance you will explain how to add 110 plug and Inverter in cab - Maybe one day ?? Gladiator 2022
Thank you
I just followed step by steps this tutorial and definitely did it work flawless ✨️! Really helpful 👍
I recommend that instead of paying that amount of money, you just remove the electronic module from the base (it's super easy) and look at it against the light since the pins where you assemble the harness go down to the green plate and are only soldered on. individual tracks, it is advisable to release them completely, clean the solder plate (tin) and re-solder that will prevent you from making a greater expense and it will be like new. The cost of the materials is 10 dollars. Do it yourself and it will be like new again. .I did it in my 2018 latitude jeep
Yea, opened up the bezel, jiggle the hardness wire a bit, and that also fixed it - so maybe sometimes the problem is the contact.
What if you have a 2014 2wd doing the same thing. Haven’t put it on a code reader yet. But I would think it’s the same thing unless Jeep changed something after 2014
Dude!!! Thank you!!! It was $800 at dealership and I did it myself for $50!! Single mom here and zero extra to deal with this. You’re so good!
Hey brother. I have this tester. I have a ram 2018 ram 2500. When i apply the brake.should the dynamic light go all tje way up to 10?
One of the best made videos I've ever seen
Many thanks!
I totally agree!
Thank you the idiots at good year couldn’t figure this out😒
I swapped mine out but I didnt replace the wiring harness, I just plugged the old connector to the new bezel and I haven't had the service shifter light come on for months now. I'll keep it on hand in case it comes back but it might save folks an extra step.
Dave - Always amazing - I have a Gladiator 2022 - Pentastar - like hearing about my Truck - BUT all of your videos are EXCELLENT - You have another SUB -
What about 2014, same condition, just went into full service shifter mode 🤔 😮
I was wondering the same thing......
Does this work on the 2014 model as well? I imagine they didn't change much from 2014 to 2015
Yes it will. I just did it myself in 20min and the issue was fixed and I have a 2014 jeep Cherokee
@@miguelc9982 figured so, just wanted confirmation from someone before I take a wack at it. Thank you!
Great film footage, obviously you took the extra time to get the camera angle right
Great job Dave >> great instructions as usual .
I second that👍
great video so detailed instructions appreciate that..thank you but at the end clear code how you do that im diy the shifter service comes on once in awhile not all the time is that what you mean about code
Sometimes you can disconnect the battery and reconnect. Typically if the issue is fixed the light will eventually go off and after awhile the code will disappear. Otherwise might be able to get the local parts store to clear it….unless it’s against their policy
Great video! Excellent presentation.
Will this work on the 2014 model?
Thanks
Ps... update this worked great , and now I'm actually getting better gas milage and my cherokee is running way better. Used to constantly down shift at the slightest upgrade, now it doesn't. Love this.
Thank you very much. The video is very detailed without over complicating things.... perfect and thank you! Step by step - and you saved me over 1200! Great job again, Thanks!
Hi Dave, I have a problem on my Pt Cruiser 2002 Automatic transmission.
The problem is: The backup lights Doesn't work.
The bulb and fuse are ok..what do you think could be wrong.
Thank you 4 your help.
Love your videos, Dave. Great tutorials. 👏👏❤️❤️
Just watched the video !! 2 questions...Is there a "Recall" for this issue !! Second, What's the reboot sequence ?? Thank You
Will this process work to remove the service shifter display on a 2014 Trailhawk 3.2L for error codes U0103-00 and U1465-00? I do not have the error code P1C86-1D.
I’m sorry you said dialector grease?
Could you help me please. Im trying to torque down the flex plate to torque converter in an 2011 vw routnan . I have read on line and have seen 3 different answers. Thank you.
Not related but can you direct me to on any issues or diagnostics of a 2019 Jeep Wrangler 3.6 with ess battery not charging properly ? Can these be deleted ?
So what's the symptoms of a "service shifter" message??? Why replace the PRNDL if the Jeep is fine???
Now that we know how to change it. What actually happened to the old one? Visually you see nothing wrong, and there’s no moving parts. Is a defective manufactured part are what?
Question, I have a 2015 that still looks new but the PRNDL bezel looks worn and I really want to replace it. I assume I follow the same steps but I won’t have to remove as much since I’m not digging for the bottom wire connector but just replacing the top? Thank you! Really appreciate how thorough, clear and concise you were in this video.
Great Informational Video, I now have the know how should I ever need to preform this job.
THANKS 👍
Hi and thanks for this info-was there a recall for this? This happened to me just the other day and all the lights lit up on the gear shift panel and I did get the Service Shifter alert on the dashboard. I thought this might have been a transmission problem or something to do with changing the differential fluid.
Great video! Followed your instructions and got it done in about 45 minutes. Would've been 20 less of my hand was half as big.
Hello David, any chance on doing a video for replacing the eight speed rotary switch for dodge ram pick up truck? Numerous times I've gone out to start the truck up put my foot on the brake and the selector switch is stuck in park will not turn. After numerous attempts, it finally going to drive.
I want to thank you for the information you gave on changing out the shifter cable and parts I had a 2018 Jeep Cherokee your instructions made it so easy that it only took me less than 30 minutes to replace the parts and they work just like they should be on a brand-new😀😀 car thank you very much Godspeed.
Very Well done.. 👍👍
Anyone ever have problems with the eight speed transmission on a dodge ram 1500 that won't shift out of park???
Thank you soooo much bc I have that message now im nervous but I’m confident
Just followed the tutorial got it fixed on the first go. Thanks for the video brother I appreciate it!
Thanks sir for the description and part names and dismantling, and installation. Great video for us , me Diy'er five years learning automive's and I still consider myself a beginner, so much to learn, but I love automotives.
Nice
Completed in about 15 minute. Super simple, thanks a million. Saved me a couple hundred bucks.
Hello, man!)
Привет и спасибо из Москвы!
Спасибо за то, что вы первый человек и за просмотр!
Dave, I did this, and it still shows the service shifter light. I guess I have a bad shifter?
I have no scanner
Will you feel the connector click into place when re-attaching? I feel like mine is in but it will not lock.
What’s that tool call
Thank you sir very well explained video, made it easy for me to follow .
Does the same electronic component apply to both the 4 and 6 cylinder Jeep?
GRACIAS DESDE COLOMBIA!!! THANKS!
Excellent video. Very well lit so you can see exactly what you need to. Thanks!
why this unit fails ,its only a few leds and some resistors they rust quickly ?
Thank you so much for your video
You’re welcome and thanks for watching!
Isn't this a problem to the 2014 KL?
Hey Pal, why isn't Your Amazon affiliate page working anymore???!!!
Just checked and working fine on my end. It’s a generic link and not for any specific item. If you look at the link at the top of that Amazon page you will see the channel name buried in it.
Will this help if vehicle is stuck in reverse but gear is in park?
Great video David! Thanks for sharing. Glad your doing good!
I always enjoy and learn from your videos. Really wish you made more of them.
Nice to see you again, Dave.
great help, you rock !! Thank you very much
👋 can i drive my car until i can get the shifter fix
You do not have to take it apart that much bullshit
Great video, will be doing this on my moms jeep
Yes my favorite Jeep technician 👊🏻
Thanks for sharing your knowledge!
grasias amikgo you the bestt
Thank you
Good jobe .....❤
Thanks
Really great video. How do you clear the code though?
You need a scanner capable of reading the transmission codes
Whats up dave!!!!!!
Thank you bro.
Thanks!
I just replaced my shifter bezel and wiring harness today on my 2014 Jeep Cherokee Trailhawk. This tutorial is definitely worth watching, excellent instructions! I was really surprised to see the interface between the old wiring harness and the shifter bezel? Doomed to fail? Thank you for your help on this!
Hi Tim, could you tell me what the symptoms were on your Jeep? I have a 2014 Jeep Cherokee Trailhawk 3.2 and can't get it into four wheel drive anymore. I am getting the U1465 code. Any info would be greatly appreciated. Thanks, Joe
Hi Joe, I was not receiving a code on my scanner. The display read service shifter continuously. My Jeep ran perfectly fine, no issues with four wheel drive. I've had issues with my four wheel drive but it was an issue with the Power Transfer Unit (PTU). It might be a faulty signal with your PRND bezel? It's a relatively cheap fix to start with? @@JosephIrizarry-er1uf
Where are the bulletins available?
He gave the tsb number at the beginning. Just put that into a Google search.
@@gregmosk OK
you are awsome bro.....
Thanks Johny!
1!