Hope you enjoyed this little video. I'm always kicking around ideas on how to improve the yotahome/trailer setup. Right now it's pretty sweet, especially the trailer setup. How would you go about improving this setup? Thanks! Check out torturetestmagazine.com/yotahome to see the most up-to-date info on my mobile living arrangement, because I change it often! You can still get this trailer, but not for $199. It is available here from Ironton, which is basically just a different trim level: amzn.to/3DxuBgT (affiliate link) Whether or not the trailer will be considered street legal depends on your state of registration. PRODUCTS IN THIS VIDEO: POWOXI 100W & 60W Folding Solar Panels - Used in parallel to charge my Jackery 500: amzn.to/3J2vxLj (affiliate link) 8mm Parallel Cable - Used to parallel the two panels: amzn.to/3wZ3nyl (affiliate link) 8mm Extension Cable - Used to move the panels into an advantageous position: amzn.to/3J2vOOl (affiliate link) Bearing Buddy grease caps for mini Harbor Freight Trailer - These keep the bearings fed with grease: amzn.to/2WdcNq5 (affiliate link) DeWALT Jobsite Boxes - I have these bolted to the trailer to enable several hundred pounds of cargo carrying capacity: amzn.to/3qcqwJt (affiliate link) TUSK Camp Chair (medium) - Very portable little chair that is actually a lot more comfortable than those standard camp chairs you find at the store: www.rockymountainatvmc.com/pa... (affiliate link) BIG RED Jack Stand (2 ton) - Used for changing tires on the mini trailer, and occasionally finds some use with the 4runner: amzn.to/3u4bkAC (affiliate link) Yamaha EF2000isV2 inverter generator - Quiet, efficient little generator that I use when the Jackery and solar panels alone aren't going to cut it: amzn.to/3kCfpHj (affiliate link) MSR Riding Gear Bag - Keeps every single piece of my riding gear readily accessible and organized: www.rockymountainatvmc.com/ri... (affiliate link) Check out my website for dirt bike related merch, premium content, and sponsor spots: torturetestmagazine.com/ Check out this page that has up-to-date info on my current bike setups! torturetestmagazine.com/pages/bikes Check out the page that has an up-to-date list of my current riding gear! torturetestmagazine.com/pages/current-gear Start shopping at Rocky Mountain ATV/MC by bookmarking my affiliate link! www.rockymountainatvmc.com/?ref=1046& See my Amazon favorites like the supplements I take to stay healthy and athletic! www.amazon.com/shop/torturetestmagazine Buy whatever you would normally buy on Amazon, but get there by bookmarking this link so I get a kickback! amzn.to/3vVlH8p Get a ton of teaser content by following my Instagram! instagram.com/torturetestmagazine/ Don't forget to subscribe with notifications turned on, hit thumbs up, leave a comment (even if it's just "leaving a comment to turbo charge the algorithm"), and share this content!
I had a 4x8 version of that trailer. Upgraded the wheels to 12 inch. More ground clearance and helped the bearings slow down a little. Great trailer, hauled my bikes all around for 10 years. Finally have an enclosed trailer. It comes in so handy. You’ll love it when you get it. Great review as always.
I also have the same trailer bought in 1994 and upgraded to the 12" wheels. This slows down the wheel revs by 22%. I put 3/4" PT plywood and I have not yet to replace it. Sure comes in handy without a pickup truck.
No one knows the exact day hour /But we can see the signs events all around us. And by the timeline, Israel is 80 years and 1 generation span according to bible text will be around 2027 , which israel was declared first in 1947 + 80 years = 2027 . so we know we dont have 10 years left as this is 2022 so the rapture, then the tribulation will be before 2030 for sure. The rapture will happen without a doubt and it will happen much sooner than many believe (less than 10 years according to all the environmental, weather,astronomical signs ,israel timelines etc showing ). It will happen without any warning , not one , in an instant , catching masses of people off guard just like God always does, ie the flood ~ a rude awakening . No one knows the exact day or hour the rapture will happen is a certainty . THE RAPTURE CAN HAPPEN NOW at ANY TIME make no mistake !! . Please awake to Christ Jesus which is the ONLY hope NOW and dont let it be found out it IS all true later when its too late & many have been left behind in the most terrible times the earth Has Ever experienced Before and ever will...for anyone who sees this and doesnt know what to do please If anyone hasnt given their life and heart to Christ Jesus will have REAL BIG problems way bigger than any problems Ever had If left here on earth after the Rapture . After the Rapture The USA , Worldwide , will face More evils , Inner city chaos, firearm wars etc etc ,power & water , food shortages , military invasions,mass executions (yes much blood will be required by antichrist ) etctec than it Has EVER been seen Before and you surely dont want to be Here then . We Have Time NOW to change , please seek Christ Jesus while there is still time to save ! no one knows the day or hour of the rapture it will start out just like any other day and it will Take Place In the day In Broad daylight/sunny day , In an Instant FLASH without ANY warning ,& there will be peoples Driver Ids, cell phones ,wallets found in various parking lots,Purses, bill folds Found at work etc etc with NO explanation , and People VANISHING so No One can refute it has taken place. . romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead thou shall be saved! please share with others =IMPORTANT raptureready.com Information for anyone who has come across those that refute the rapture and say that it was supposedly made up and say it was created by darby church in 1700s . This is real good to show it was way before darby , and its documented . also rapture pre trib proofs even in dead sea scrolls . 15-1700s/ irenaeus 170ad/ 250 ad / /isidore 4th century sourced by intense search and study by ken johnson ua-cam.com/video/e1Nv-xFig8I/v-deo.html
Thanks for your input on the trailer. Greased bearings are happy bearings ! Keep them greased and properly tightened and your should be just fine. Keep living the way you want. Break bones when your young . It heals better. Enjoy every minute of your youth. ITT goes by shockingly fast. Take it from an old man looking back . Happy trails young man. Go fast.
I have the 4x8 and I loaded my tool boxes onto it when I quit being a Mechanic, and holy crap, it held up fine. The 6 year old plywood didn't hold up so well, but the trailer itself was great.
Good review. I did something similar with my 4RUNNER and got a $40 harbor freight bike rack that i used to haul my mountain bikes. The thing works great and i'd trust it to haul my bikes cross country., it's steel powder coated, welded, and gusseted. It seems very good for the money but i stupidly scraped it on the ground when offroading a bit so now i don't trust it. Thankfully a family member gave me a better one for free, but i really don't trust the reviews anymore that say your stuff is gonna break and fly off the back. If you install it correctly, and you tighten the bolts and you regularly inspect it... You will be fine. I think most of the bad reviews are user error. From the dudes i see on the freeway doing 80mph hauling their stuff. It's cheap stuff so treat it that way, and you'll get away with it. Don't push it and beat it up.
Lol! It's one big ready-to-go budget racing package xD If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I drug one around behind my motorcycle for years. On it I had a storage box, large dog kennel(pups need a vacation too!), cooler, couple of gas cans and 2 spare tires. In the box I kept camping gear, tool kit, wheel chocks and other stuff. I know I pulled it at least 25k in 4 years. Definitely worth the money and maintenance to keep it on the road. I have a 4x8 trailer also that I have loaded bikes on to rescue friends. It looks funny with a couple of guys on a motorcycle dragging a trailer with a motorcycle on it. I've also used the 4x8 to carry kayaks among other things. I can't ride any longer. Thank you for bringing back those wonderful memories!
Extremely well, they did it over on the Motorcyclist Magazine channel a while back: ua-cam.com/video/nF2mo-lhVwY/v-deo.html It's basically my dream setup. Too bad new Goldwings are so expensive.
Next tire change... Try the wide 4*4 trailer wheels. Their the ones they use on snowmobile trailers, and similar to golf carts. Little more load, little more stability
I plan on building one for my 2022 accord, I want to build a deck first then attach something like he did all professionally. I did want to change the wheels, would you have anymore advise other than 4x4 trailer wheels?
Taller tires keep wheel speed down, hence they won't roast wheel bearings so bad. I got mine back in the mid 2000s and got it with the 12" wheels and haven't had a bearing issue yet. And all I did was weld up some sheet metal to reinforce the stress cracks the fenders got.
we have a 4x8 HF trailer that we have had for 14 years. its hauled hundreds of thousands of pounds in its year with only a tire change wood replacement and light upgrade!
i have the fold up trailer. these are perfect trailers for dirtbikes . these trailers are very good quality and no one should be worried about buying one. I have had one for years. I would suggest having a spare tire.
I've got a 4x8 I bought used off craigslist and who knows how old for $250. I've put 50k miles on it so far with 2 dirt bikes, bunch of camping gear, and works great. Had a few flats, a bad wheel bearing, and the fenders fell off. LED light kit--buy a good quality trailer wire harness. The HF trailer wires are made of aluminum coated toilet paper. the "wires" just fall apart new and turn to dust.
I had a hard time determining what kind of wiring the stock junk was. Now that you mention it, aluminum with toilet paper sheathing does seem accurate! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I have the same set up with my tough boxes!! And I live in the mtns in my 22ft trailer and room is the down side!! So they all fit in my front storage area!! And when i go to someplace elto ride i just put them in my pickup!! Storage beens are a must!!
I built one to haul my Husky and gear behind my Prius. I probably put 20k miles on it and it went from CA to OK nonstop a couple of times. I decked it and added nice side rails and led lights. Never had an issue. Sold it after 5 yrs for more than it cost me to build and maintain. Caveat is you have to take your time and put it together correctly and well and understand the limits. Keep it under 65mph, lube the hubs often, and don't abuse it.
This is awesome, Gabe. I have a Ford Focus hatchback and was just contemplating how to get my bike to the local ORV areas for some riding. I will be grabbing up a Harbor Freight trailer tomorrow. Love the videos and love watching you grow as a rider as well. Best of luck in the future, sir.
I've noticed in some of your general riding clips it looks like Carnegie east of Livermore - yes? That is our home playground. If you still occasionally get out there I'll be paying more attention to who goes by me on the trail lol
Nice. I have wondered about doing something like that but now that I'm full-on mobile-living I'd rather just get bigger enclosed that I can slowly build out. How's the paragliding going?
@@TortureTestMagazine Work consumed my life and I don't have much time to do it anymore :( Having the trailer enclosed is nice but being homemade I'm constantly fighting against water intrusion and the gas mileage plummets since you're essentially towing a cube down the highway.
Just drove from CT to Florida with the "heavy duty" 4x8 HF trailer behind me.. It did excellent, almost like it was glued to the road. Not a hiccup or any issue whatsoever
My family and I have used a harbor freight trailer for over a decade and 10k miles. Do the maintenance and check you bearings, you'll be good. Ford explorer, the name exists for a reason.
I’ve been considering one of these for a few years and this video is exactly what I wanted to see thanks for posting. Finna get me one and throw some 12s on that thing
What size tire is that ? Looks a little bigger than the ones that came on mine , 4.80 x 12 keep on keepin' on Dude ! I want everyone to put a bug in Rocky Mountain's ear about hooking you up with an enclosed trailer , I'm going to ! They got to have at LEAST one spare layin' around.........
The ones in the video are 4.80/4.00-8 they are tiny, absolutely microscopic! The 12s are the hot upgrade for my older model with 8s. I've seen what Rocky Mountain has laying around... and all of it is far too nice for me! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
The lights suck because one needs to weld all four corners together. All four corners are not truly grounded cause its just bolted. I welded up and its great. Keep wheel bearings greased and maintin the paint and deck.. great trailer mine is. I gots 4x8. Love it. And fenders suck but i cut the end off a 55 gal plastic barrel and cut that in half for fenders. Worked well but they are warped but dont rub. Whatever
When you get your enclosed box trailer, you should have a look at installing a roof top tent on it. That way you can have your car back as a car and still stow all of your belongings.
Get about 3-4 feet of 1" wire rope and take the tongue off and JB weld each end (lots of JB) inside the tongue. Nobody will EVER be able to cut through the tongue unless they have a torch. Many years ago a friend had done this on a more expensive trailer and one morning he came out and found his hitch-locks battered to hell and a 1/2 cut tongue bar (stopped at the cable). The cable moves back and forth so cutting with a hacksaw is impossible. He just welded over the cut and was back in business. I like to think about the would-be thief's arm falling off the next day.
This is an excellent idea! Thanks! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I have their little trailer like this for 25 years...started behind my touring bike and then moved to yard trailer. I had their boat trailer, and traded it for a very used 4x8 harbor freight trailer - i chnaged the deck, dry rotted tires,and wiring (rotted too) and have abused it since - 1000lb loads on a regular basis. solid,no rust (surprising)!
I have the 4x8 version of this trailer. I've had it since 2007. I've used it to haul bikes, move my kids, haul firewood. It's been used and abused. It's held up well. I have a plywood deck and stake bed sides. It looks like a radio flyer wagon. The only thing I've done to it is replace the lights. a few times and go through an tighten everything up. I guess I replaced the tires because they weather cracked.
I have replaced the trailer's standard hubs and rims with 15" rims and 31x10.5x15" General Grabber X3 tires . . the same as the ones on my truck .( they have a lot of rubber between road and rim, and you dont worry about potholes, they so soft , i pump them 30 psi, same pressure as tires on my truck, . . i now have 2x spare wheels that can fit both truck and trailer . .same rim sizes...doesnt make a difference in towing.
After watching this video, it had me reminiscing about my own experiences with Harbor Freight trailers over the years. 32 years ago I had the 4x4 with a Sears Turtle car top carrier mounted on a plywood deck for extra luggage space to tow behind my Trans Am, and got a lot of compliments on it. Then added a 4x4 deck above it for mountain bikes and other things. I needed more room for my growing family, so I sold the Trans Am, bought a Ford Bronco (which I still have that looks great), sold the 4x4 trailer, and upgraded to the 4x8 model. Had it for 20 years and used it to haul all sorts of things (camping gear, mountain bikes, green waste to the dump, lumber from Home Depot, moving furniture, etc.), and even used it once to tow my BMW K1200GT behind my RV on a trip to Death Valley last year. However, it was getting a little tired, and last year a neighbor offered to buy it to use at his cabin in the mountains in So. CA, so I sold it. I was a little saddened because of the fond memories, and the utility it provided, but knew in my mind it was time let it go. My intention was to build another trailer one day, mainly for towing the motorcycle behind the RV and Bronco, so yesterday I purchased the Super-Duty (1720 lbs) 4x8 trailer. The plan is to build gates (fencing) like the other 4x8 trailer, but shorter and studier, paint them red, put pressure treated plywood (painted) down for decking with 1/8" aluminum diamond plate over it. I will install a wheel chock in the center (make it removable), buy the 30"x72" aluminum loading ramps, and mount a spare tire and jack stand on the tongue. I will also install drop-down jacks underneath at the corners to stabilize the trailer when loading (saw on UA-cam). I had eye hooks at strategic places (corners) on the previous trailers, and will do the same to this one, but add some flush-mounted hooks on the deck. One important suggestion I saw on the internet is to remove all the wheel bearing grease and re-apply good quality, high-temp grease, since the stuff HF uses is garbage. I'll also add 'bearing-buddies' on both wheels too. Since this trailer has the ability to fold-up like a ping-pong table, I'll make sure it is capable of doing that so I can store it upright in my garage, which means I'll cut the plywood in half (4x4), buy 4x4 diamond plate, and will put better (slightly bigger) castors on it so it rolls easier. From the looks of things, it seems you have outgrown the little 4x4 and need a 4x8. However, the bigger the trailer, the more 'stuff' you'll accumulate. Plus, it might be a 'stretch' for your vehicle to tow more weight. Either way, the logical choice is a 4x8 to make things easier and not so difficult to squeeze all your motorcycle stuff on such a small trailer. Still a great story and thanks for sharing your journey with the Harbor Freight trailer..!!!
I towed one from NY to Cleveland for a project years ago. Since it was empty it was bouncing like mad. Ended up stopping and removing the fenders because of the stress cracks they got and welded em up with some reinforcements later. Other then that it now has a 15kw 750 pound diesel genny bolted to it and works fine. That's maxed on the payload pretty much too.
Within minutes of watching your video I knew that I had found an excellent channel that I would subscribe to and immensely enjoy. I respect your outlook and attitude, and as a former motorcycle mechanic and workshop owner I really appreciate you buying older, inexpensive motorcycle and working on them yourself. On any bolt together trailer, retightening may be occasionally needed, though your bearing lubrication device and frequent tyre pressure checks should be all that's needed. An enclosed trailer will affect your fuel consumption and wear and tear on the tow vehicle. A V-Nose front will help and increase storage capacity, and you can get enclosed trailers at 4 foot height and with lift up lid/roof to ease loading and access. The lower the trailer, the less wind drag it creates, even less with the V-Nose trailer, obviously. You could construct simple, lightweight panels to create your own enclosed trailer using your current one as the base. I would really consider fitting 12 inch wheels as they will make a world of difference. Or, you could perhaps consider using the Irontron aluminium trailer as a base to reduce weight.
Thanks for sharing that gear bag info - just used your affiliate link to it but it's out of stock, they'll email me when it's back and I'm stoked you'll get a small kickback on it. Thanks for all the great content. Oh, when can we buy more sponsorship stickers for the SP500? any races planned?
Depending on the year, your ford exploder may have been on its second or third transmission when you got it. I had a HarborFreight trailer that served me well for 20 years before I gave it to a friend who is still using it.
Pro tip buy another axle with spare tires and rims and pack it along with tools to change it out on the side of the road, take a welder with also.. Or... just buy a decent trailer to begin with! Its not IF it fails,its WHEN, with that! LOL
It wouldn't be too much hassle to pack around extras and some people may feel the need! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I currently have a box and a rtt on mine. I've towed it 2k miles so far and I've loved every minute of it. I've comfortably taken it up to 85mph and yes, it does leave the ground on some bumps. Also I bought my trailer in May 2020 and it did come with LED lights and I ran a ground to every light (I always have for every trailer) and I've had zero issues
I have pulled my 4x8 Harbor Freight trailer across the Country many times. They are as good as the assembly. Mine has been to California from Florida at least 5 times
I wish habor freight still sold these when I was getting a trailer. I like my 6x8 but 99% of the time I'm only hualing one bike and one of these would have been perfect.
They do but the price is quite high right now ($400). If supply chain issues clear up over the next year or so, hopefully they'll come back down in pricing. I originally purchased a 4x8 and sort of wish I would have gone with the smaller trailer at the time. Would have been a lot easier to store and deal with!
@@KestrelYI I know you can still get them, but for 400 dollars, I don't think they really make sense in most cases. I would have gone with the 4x8 for 100 dollars more if I hadn't found this 6x8 for 500.
Badass! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Easily! My friend just sold his of the exact same model for $600. You could probably run a side hustle building and slinging these outfitted for bike hauling. If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I thought of buying a small trailer kit but Illinois jacked up the yearly registration of trailers so high it just wasn't cost effective. "F" Illinois and their excessive taxes.
That is pretty annoying. Might be worth checking to see if you can have out of state registration on a trailer there If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
My family has had the 4x8 version of that trailer for nearly 20 years. It has been redecked probably 4 times, probably the same number of side rails on it. It has been loaded with multiple ATV's and dirtbikes at once, I even went to lower California and hauled a complete Ausin Mini Moke to Oregon on it. It has been up to Canada, down to New Mexico. It has been towed by every vehicle we have that has a tow ball on it. The trip from Vancouver Washington to New Mexico it was towed by a Ford Festiva to pick up the bare shell of a Austin Mini. We have bought numerous spare tires on these trips but have never needed them, it is still on it's ORIGINAL tires, we end up losing or misplacing the spared over the years... I have replaced the wheel bearings once due to it sitting for a number of years and the bearings rusted. This one trailer that people have scoffed at has managed to convert many people into their versitality... My father even ended up buying one a few years ago after calling it junk for so long. The frame and suspension has never given us issues, had we not let it sit the bearings would probably have been fine. The biggest issue we have had with it over the years is wiring, but that is not the trailers fault but the guy not taking care of the pigtail or backing the lights into a pole :)
Upgrade the fenders by passing 7/16" threaded rod though both sides and the frame. The are as thin as potato chips but I could stand on them with the extra support. I had the Menards version for 18 years. I hauled an FZR600 and tons of building materials. I built interlocking sides out of 1x6s and abused it towing rock around the yard with the garden tractor. I upgraded to bearing buddies and a spare tire. Sold it for what I paid for it.
The tires from harbor freight definitely aren't great but I don't fret running them if they're the only thing around because blowouts on this tiny thing don't cause a big ordeal. I've had two. On one I felt it start vibrating and pulled over to find the HF tire totally nuked, riding on the rim. On the other I never even noticed, or maybe I did and just turnt up the music lol. Got to where I was going and the sidewall was blown out and I was like well that's unfortunate! Didn't run down to the rim on that one. Haven't had a blowout on walmart tires. They wear down until the tire is bald. I'll try the cheaper Kendas next! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Thanks, glad you liked it! If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Why not a hitch mount rack? I had an HF folding trailer for my dirtbike 20 years ago. If you use the hitch rack, you don’t have another axle on the ground. btw, nobody wants your trailer, but bike yes.
I literally just put this trailer together last week for my pit bike. It’s perfect for my needs. I even haul it with my small Toyota. I did put new grease in the bearings because people told me the grease it ships with is bad
Mine had the fenders crack to hell at the mounting points, easily fixed with a welder and some sheet metal to reinforce them so they don't bounce around and stress crack again.
Probably June. The 10 hour endurance race at Glen Helen. I am probably going to do it with my friends again like last year If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks! torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I know you probably don’t have it anymore, especially after the torture test videos. But when you mentioned the locks, look into ones by Bolt. They use your vehicle key, which you will probably always have with you. So you can buy a hitch pin for your receiver, the tongue lock, cable lock, padlocks and they all use your vehicle key. So one key for everything. And it’s a little bit harder to pick since it’s a vehicle key and not just a padlock key. A lot of convenience without having to worry about what key goes to what. All your tubs, hit, cable lock can all be the same
No fear on the random thief stealing the trailer they’ll just cut your cat off for 10x the value but no guarantee on the desalt bins and the bike unless it’s a chinesium nockoff ? Lol 😂
Yoyoyo...... will this trailer withstand a CR500 ported n' polished, squishy band thingy, with triple platinum gold dust FMF Fatty Pipe? Rip yo arms outta yo sockets, bro!
Yeah that trailor is crap.. I bought a 6x6 and tore it apart and upgraded the wheels.. I then welded square stock made it bigger.. Keep your eye open for a used trailer marketplace.. Im hauling two quads side by side and 2 bins.. I have some metal to enclose another one i just bought..
How tight do you turn the bolts? There are no torque specs anywhere except for the wheel itself...some of sheet metal bends with no force at all like the two 19mm that holds the leaf springs on....also the u-bolt spring plate bends quite easily when torquing down....any advice?
Tights tight, too tights broken! Use some locktight. If things are bending your over tightening stuff.. Weld corners for better grounding for lights and maintenance man!
I like the setup I have the same trailer I also have my motorcycle mounted to that trailer the crazy differences I pull it with a Honda Goldwing 1500 motorcycle
Something seemed off in this and then I looked at the channel name again and it was not Torque Test Channel.. I was wondering why torque test channel would make Harbor Freight trailer review. My bad.
You get what you pay for …..especially when buying Chinese ….uh…….stuff. My experience is that you need to modify most of those things to make them work properly.
Hope you enjoyed this little video. I'm always kicking around ideas on how to improve the yotahome/trailer setup. Right now it's pretty sweet, especially the trailer setup. How would you go about improving this setup? Thanks!
Check out torturetestmagazine.com/yotahome to see the most up-to-date info on my mobile living arrangement, because I change it often!
You can still get this trailer, but not for $199. It is available here from Ironton, which is basically just a different trim level: amzn.to/3DxuBgT (affiliate link) Whether or not the trailer will be considered street legal depends on your state of registration.
PRODUCTS IN THIS VIDEO:
POWOXI 100W & 60W Folding Solar Panels - Used in parallel to charge my Jackery 500: amzn.to/3J2vxLj (affiliate link)
8mm Parallel Cable - Used to parallel the two panels: amzn.to/3wZ3nyl (affiliate link)
8mm Extension Cable - Used to move the panels into an advantageous position: amzn.to/3J2vOOl (affiliate link)
Bearing Buddy grease caps for mini Harbor Freight Trailer - These keep the bearings fed with grease: amzn.to/2WdcNq5 (affiliate link)
DeWALT Jobsite Boxes - I have these bolted to the trailer to enable several hundred pounds of cargo carrying capacity: amzn.to/3qcqwJt (affiliate link)
TUSK Camp Chair (medium) - Very portable little chair that is actually a lot more comfortable than those standard camp chairs you find at the store: www.rockymountainatvmc.com/pa... (affiliate link)
BIG RED Jack Stand (2 ton) - Used for changing tires on the mini trailer, and occasionally finds some use with the 4runner: amzn.to/3u4bkAC (affiliate link)
Yamaha EF2000isV2 inverter generator - Quiet, efficient little generator that I use when the Jackery and solar panels alone aren't going to cut it: amzn.to/3kCfpHj (affiliate link)
MSR Riding Gear Bag - Keeps every single piece of my riding gear readily accessible and organized: www.rockymountainatvmc.com/ri... (affiliate link)
Check out my website for dirt bike related merch, premium content, and sponsor spots: torturetestmagazine.com/
Check out this page that has up-to-date info on my current bike setups! torturetestmagazine.com/pages/bikes
Check out the page that has an up-to-date list of my current riding gear!
torturetestmagazine.com/pages/current-gear
Start shopping at Rocky Mountain ATV/MC by bookmarking my affiliate link! www.rockymountainatvmc.com/?ref=1046&
See my Amazon favorites like the supplements I take to stay healthy and athletic! www.amazon.com/shop/torturetestmagazine
Buy whatever you would normally buy on Amazon, but get there by bookmarking this link so I get a kickback! amzn.to/3vVlH8p
Get a ton of teaser content by following my Instagram! instagram.com/torturetestmagazine/
Don't forget to subscribe with notifications turned on, hit thumbs up, leave a comment (even if it's just "leaving a comment to turbo charge the algorithm"), and share this content!
Sadly that trailer now retails for $399 :(
I would just jack the whole trailer...
I had a 4x8 version of that trailer. Upgraded the wheels to 12 inch. More ground clearance and helped the bearings slow down a little. Great trailer, hauled my bikes all around for 10 years. Finally have an enclosed trailer. It comes in so handy. You’ll love it when you get it. Great review as always.
A friend of mine turned the 4x8 into a enclosed trailer with more plywood and 2x4s and used for a small tool trailer . . worked well
I’ve had the 4x8 version since 1995
Replaced the axle in 2000 with a straight axle. Just redid the deck in 2020
My dad had the same trailer My brother now has it It's 30-40 years old and still works fine lol
I also have the same trailer bought in 1994 and upgraded to the 12" wheels. This slows down the wheel revs by 22%. I put 3/4" PT plywood and I have not yet to replace it. Sure comes in handy without a pickup truck.
No one knows the exact day hour /But we can see the signs events all around us. And by the timeline, Israel is 80 years and 1 generation span according to bible text will be around 2027 , which israel was declared first in 1947 + 80 years = 2027 . so we know we dont have 10 years left as this is 2022 so the rapture, then the tribulation will be before 2030 for sure.
The rapture will happen without a doubt and it will happen much sooner than many believe (less than 10 years according to all the environmental, weather,astronomical signs ,israel timelines etc showing ). It will happen without any warning , not one , in an instant , catching masses of people off guard just like God always does, ie the flood ~ a rude awakening . No one knows the exact day or hour the rapture will happen is a certainty . THE RAPTURE CAN HAPPEN NOW at ANY TIME make no mistake !! . Please awake to Christ Jesus which is the ONLY hope NOW and dont let it be found out it IS all true later when its too late & many have been left behind in the most terrible times the earth Has Ever experienced Before and ever will...for anyone who sees this and doesnt know what to do please If anyone hasnt given their life and heart to Christ Jesus will have REAL BIG problems way bigger than any problems Ever had If left here on earth after the Rapture . After the Rapture The USA , Worldwide , will face More evils , Inner city chaos, firearm wars etc etc ,power & water , food shortages , military invasions,mass executions (yes much blood will be required by antichrist ) etctec than it Has EVER been seen Before and you surely dont want to be Here then . We Have Time NOW to change , please seek Christ Jesus while there is still time to save ! no one knows the day or hour of the rapture it will start out just like any other day and it will Take Place In the day In Broad daylight/sunny day , In an Instant FLASH without ANY warning ,& there will be peoples Driver Ids, cell phones ,wallets found in various parking lots,Purses, bill folds Found at work etc etc with NO explanation , and People VANISHING so No One can refute it has taken place. .
romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead thou shall be saved!
please share with others =IMPORTANT
raptureready.com
Information for anyone who has come across those that refute the
rapture and say that it was supposedly made up and say it was created by darby church in 1700s . This is real good to show it was way before darby , and its documented .
also rapture pre trib proofs even in dead sea scrolls .
15-1700s/ irenaeus 170ad/ 250 ad / /isidore 4th century
sourced by intense search and study by ken johnson
ua-cam.com/video/e1Nv-xFig8I/v-deo.html
Thanks for your input on the trailer. Greased bearings are happy bearings ! Keep them greased and properly tightened and your should be just fine. Keep living the way you want. Break bones when your young . It heals better. Enjoy every minute of your youth. ITT goes by shockingly fast. Take it from an old man looking back . Happy trails young man. Go fast.
I switched over to 12" wheels and car tires on mine. No more tire issues and they last forever.
They discontinued that trailer in 2019 they were on clearance for $99
Jeez I woulda grabbed 2 of em if I knew 😦
Huh. I bought one in May 2020. Had to pre-purchase, but I was able to get one from my local HF
@@MrTheHillfolk you may still check HF if you need one. I bought one for $250 back in May 2020. It was a pre-purchase though.
I have the 4x8 and I loaded my tool boxes onto it when I quit being a Mechanic, and holy crap, it held up fine. The 6 year old plywood didn't hold up so well, but the trailer itself was great.
Good review. I did something similar with my 4RUNNER and got a $40 harbor freight bike rack that i used to haul my mountain bikes. The thing works great and i'd trust it to haul my bikes cross country., it's steel powder coated, welded, and gusseted. It seems very good for the money but i stupidly scraped it on the ground when offroading a bit so now i don't trust it. Thankfully a family member gave me a better one for free, but i really don't trust the reviews anymore that say your stuff is gonna break and fly off the back. If you install it correctly, and you tighten the bolts and you regularly inspect it... You will be fine. I think most of the bad reviews are user error. From the dudes i see on the freeway doing 80mph hauling their stuff. It's cheap stuff so treat it that way, and you'll get away with it. Don't push it and beat it up.
Absolutely love budget racing, and this is a good one……. along with the SP!!
Lol! It's one big ready-to-go budget racing package xD
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
They’re now $400
No way
I drug one around behind my motorcycle for years. On it I had a storage box, large dog kennel(pups need a vacation too!), cooler, couple of gas cans and 2 spare tires. In the box I kept camping gear, tool kit, wheel chocks and other stuff. I know I pulled it at least 25k in 4 years. Definitely worth the money and maintenance to keep it on the road. I have a 4x8 trailer also that I have loaded bikes on to rescue friends. It looks funny with a couple of guys on a motorcycle dragging a trailer with a motorcycle on it. I've also used the 4x8 to carry kayaks among other things. I can't ride any longer. Thank you for bringing back those wonderful memories!
What bike do you have? And what type of riding?
If you're not in extremely good shape, riding dirtbikes easily blows out your back and knees. Still happens to even the best.
I wonder how well my goldwing could pull a small bike and gear trailer like that...
Extremely well, they did it over on the Motorcyclist Magazine channel a while back: ua-cam.com/video/nF2mo-lhVwY/v-deo.html
It's basically my dream setup. Too bad new Goldwings are so expensive.
ua-cam.com/video/nF2mo-lhVwY/v-deo.html
Ur a brave man. God speed sir
Really good, I believe it was the dudes from RevZilla that did just that.
Depends on what goldwing you have.. my gl1100 no way... if I had a 15 or 1800 yeah I'd maybe pull my sporster around behind it on one of these
Next tire change... Try the wide 4*4 trailer wheels. Their the ones they use on snowmobile trailers, and similar to golf carts. Little more load, little more stability
I plan on building one for my 2022 accord, I want to build a deck first then attach something like he did all professionally. I did want to change the wheels, would you have anymore advise other than 4x4 trailer wheels?
Taller tires keep wheel speed down, hence they won't roast wheel bearings so bad.
I got mine back in the mid 2000s and got it with the 12" wheels and haven't had a bearing issue yet.
And all I did was weld up some sheet metal to reinforce the stress cracks the fenders got.
we have a 4x8 HF trailer that we have had for 14 years. its hauled hundreds of thousands of pounds in its year with only a tire change wood replacement and light upgrade!
i have the fold up trailer. these are perfect trailers for dirtbikes . these trailers are very good quality and no one should be worried about buying one. I have had one for years. I would suggest having a spare tire.
I've got a 4x8 I bought used off craigslist and who knows how old for $250. I've put 50k miles on it so far with 2 dirt bikes, bunch of camping gear, and works great. Had a few flats, a bad wheel bearing, and the fenders fell off. LED light kit--buy a good quality trailer wire harness. The HF trailer wires are made of aluminum coated toilet paper. the "wires" just fall apart new and turn to dust.
I had a hard time determining what kind of wiring the stock junk was. Now that you mention it, aluminum with toilet paper sheathing does seem accurate!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
When you maintain and fix the problems. Things last a long time.
I have the same set up with my tough boxes!! And I live in the mtns in my 22ft trailer and room is the down side!! So they all fit in my front storage area!! And when i go to someplace elto ride i just put them in my pickup!! Storage beens are a must!!
I built one to haul my Husky and gear behind my Prius. I probably put 20k miles on it and it went from CA to OK nonstop a couple of times. I decked it and added nice side rails and led lights. Never had an issue. Sold it after 5 yrs for more than it cost me to build and maintain. Caveat is you have to take your time and put it together correctly and well and understand the limits. Keep it under 65mph, lube the hubs often, and don't abuse it.
This is awesome, Gabe. I have a Ford Focus hatchback and was just contemplating how to get my bike to the local ORV areas for some riding. I will be grabbing up a Harbor Freight trailer tomorrow.
Love the videos and love watching you grow as a rider as well. Best of luck in the future, sir.
two things, replace the stock tires as soon as you can afford too. second, grease those bearings asap.
I've noticed in some of your general riding clips it looks like Carnegie east of Livermore - yes? That is our home playground. If you still occasionally get out there I'll be paying more attention to who goes by me on the trail lol
0:19 I can almost see my house! The SHAC is a fun pool.
I have the 4x8. I welded a beam of c-channel down the center. Didn't add too much weight, but stopped a while lot of flexing
Metcalf
I have the 4x8 version and fully enclosed it with plywood. Hauls bikes and also serves as storage when not being used
Nice. I have wondered about doing something like that but now that I'm full-on mobile-living I'd rather just get bigger enclosed that I can slowly build out. How's the paragliding going?
@@TortureTestMagazine Work consumed my life and I don't have much time to do it anymore :(
Having the trailer enclosed is nice but being homemade I'm constantly fighting against water intrusion and the gas mileage plummets since you're essentially towing a cube down the highway.
@@wll1500 well don't stop trying to break free! Good seeing you around still man
Just drove from CT to Florida with the "heavy duty" 4x8 HF trailer behind me..
It did excellent, almost like it was glued to the road. Not a hiccup or any issue whatsoever
Speeds were fine? I see the manual says "up to 45mph"
I want one! Thank you Gabe! Kindly, Dennis
I also had a 4x4 version for two full size dirtbikes. And I would hall my stand up jetski on it. No shit.
My family and I have used a harbor freight trailer for over a decade and 10k miles. Do the maintenance and check you bearings, you'll be good. Ford explorer, the name exists for a reason.
I’ve been considering one of these for a few years and this video is exactly what I wanted to see thanks for posting. Finna get me one and throw some 12s on that thing
What size tire is that ? Looks a little bigger than the ones that came on mine , 4.80 x 12 keep on keepin' on Dude ! I want everyone to put a bug in Rocky Mountain's ear about hooking you up with an enclosed trailer , I'm going to ! They got to have at LEAST one spare layin' around.........
The ones in the video are 4.80/4.00-8 they are tiny, absolutely microscopic! The 12s are the hot upgrade for my older model with 8s. I've seen what Rocky Mountain has laying around... and all of it is far too nice for me!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
The lights suck because one needs to weld all four corners together. All four corners are not truly grounded cause its just bolted. I welded up and its great. Keep wheel bearings greased and maintin the paint and deck.. great trailer mine is. I gots 4x8. Love it. And fenders suck but i cut the end off a 55 gal plastic barrel and cut that in half for fenders. Worked well but they are warped but dont rub. Whatever
When you get your enclosed box trailer, you should have a look at installing a roof top tent on it. That way you can have your car back as a car and still stow all of your belongings.
Get about 3-4 feet of 1" wire rope and take the tongue off and JB weld each end (lots of JB) inside the tongue. Nobody will EVER be able to cut through the tongue unless they have a torch. Many years ago a friend had done this on a more expensive trailer and one morning he came out and found his hitch-locks battered to hell and a 1/2 cut tongue bar (stopped at the cable). The cable moves back and forth so cutting with a hacksaw is impossible. He just welded over the cut and was back in business. I like to think about the would-be thief's arm falling off the next day.
This is an excellent idea! Thanks!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I have their little trailer like this for 25 years...started behind my touring bike and then moved to yard trailer.
I had their boat trailer, and traded it for a very used 4x8 harbor freight trailer - i chnaged the deck, dry rotted tires,and wiring (rotted too) and have abused it since - 1000lb loads on a regular basis. solid,no rust (surprising)!
I have the 4x8 version of this trailer. I've had it since 2007. I've used it to haul bikes, move my kids, haul firewood. It's been used and abused. It's held up well. I have a plywood deck and stake bed sides. It looks like a radio flyer wagon. The only thing I've done to it is replace the lights. a few times and go through an tighten everything up. I guess I replaced the tires because they weather cracked.
I have replaced the trailer's standard hubs and rims with 15" rims and 31x10.5x15" General Grabber X3 tires . . the same as the ones on my truck .( they have a lot of rubber between road and rim, and you dont worry about potholes, they so soft , i pump them 30 psi, same pressure as tires on my truck, . . i now have 2x spare wheels that can fit both truck and trailer . .same rim sizes...doesnt make a difference in towing.
Comment
After watching this video, it had me reminiscing about my own experiences with Harbor Freight trailers over the years.
32 years ago I had the 4x4 with a Sears Turtle car top carrier mounted on a plywood deck for extra luggage space to tow behind my Trans Am, and got a lot of compliments on it. Then added a 4x4 deck above it for mountain bikes and other things. I needed more room for my growing family, so I sold the Trans Am, bought a Ford Bronco (which I still have that looks great), sold the 4x4 trailer, and upgraded to the 4x8 model. Had it for 20 years and used it to haul all sorts of things (camping gear, mountain bikes, green waste to the dump, lumber from Home Depot, moving furniture, etc.), and even used it once to tow my BMW K1200GT behind my RV on a trip to Death Valley last year. However, it was getting a little tired, and last year a neighbor offered to buy it to use at his cabin in the mountains in So. CA, so I sold it. I was a little saddened because of the fond memories, and the utility it provided, but knew in my mind it was time let it go.
My intention was to build another trailer one day, mainly for towing the motorcycle behind the RV and Bronco, so yesterday I purchased the Super-Duty (1720 lbs) 4x8 trailer. The plan is to build gates (fencing) like the other 4x8 trailer, but shorter and studier, paint them red, put pressure treated plywood (painted) down for decking with 1/8" aluminum diamond plate over it. I will install a wheel chock in the center (make it removable), buy the 30"x72" aluminum loading ramps, and mount a spare tire and jack stand on the tongue. I will also install drop-down jacks underneath at the corners to stabilize the trailer when loading (saw on UA-cam). I had eye hooks at strategic places (corners) on the previous trailers, and will do the same to this one, but add some flush-mounted hooks on the deck. One important suggestion I saw on the internet is to remove all the wheel bearing grease and re-apply good quality, high-temp grease, since the stuff HF uses is garbage. I'll also add 'bearing-buddies' on both wheels too.
Since this trailer has the ability to fold-up like a ping-pong table, I'll make sure it is capable of doing that so I can store it upright in my garage, which means I'll cut the plywood in half (4x4), buy 4x4 diamond plate, and will put better (slightly bigger) castors on it so it rolls easier.
From the looks of things, it seems you have outgrown the little 4x4 and need a 4x8. However, the bigger the trailer, the more 'stuff' you'll accumulate. Plus, it might be a 'stretch' for your vehicle to tow more weight. Either way, the logical choice is a 4x8 to make things easier and not so difficult to squeeze all your motorcycle stuff on such a small trailer. Still a great story and thanks for sharing your journey with the Harbor Freight trailer..!!!
Where did you get the channel for holding the bike?
I towed one from NY to Cleveland for a project years ago.
Since it was empty it was bouncing like mad.
Ended up stopping and removing the fenders because of the stress cracks they got and welded em up with some reinforcements later.
Other then that it now has a 15kw 750 pound diesel genny bolted to it and works fine. That's maxed on the payload pretty much too.
damn thats impressive. I'm considering picking this up to tow my 200cc dual sport. sounds like it should be up to the task.
Within minutes of watching your video I knew that I had found an excellent channel that I would subscribe to and immensely enjoy.
I respect your outlook and attitude, and as a former motorcycle mechanic and workshop owner I really appreciate you buying older, inexpensive motorcycle and working on them yourself.
On any bolt together trailer, retightening may be occasionally needed, though your bearing lubrication device and frequent tyre pressure checks should be all that's needed.
An enclosed trailer will affect your fuel consumption and wear and tear on the tow vehicle.
A V-Nose front will help and increase storage capacity, and you can get enclosed trailers at 4 foot height and with lift up lid/roof to ease loading and access.
The lower the trailer, the less wind drag it creates, even less with the V-Nose trailer, obviously.
You could construct simple, lightweight panels to create your own enclosed trailer using your current one as the base.
I would really consider fitting 12 inch wheels as they will make a world of difference.
Or, you could perhaps consider using the Irontron aluminium trailer as a base to reduce weight.
A small 200-300w inverter in the truck is great for charging drill battery's when traveling.
Thanks for sharing that gear bag info - just used your affiliate link to it but it's out of stock, they'll email me when it's back and I'm stoked you'll get a small kickback on it. Thanks for all the great content. Oh, when can we buy more sponsorship stickers for the SP500? any races planned?
Depending on the year, your ford exploder may have been on its second or third transmission when you got it. I had a HarborFreight trailer that served me well for 20 years before I gave it to a friend who is still using it.
Yes those Transmissions are soft to say the least and they explode lol
Pro tip buy another axle with spare tires and rims and pack it along with tools to change it out on the side of the road, take a welder with also.. Or... just buy a decent trailer to begin with! Its not IF it fails,its WHEN, with that! LOL
It wouldn't be too much hassle to pack around extras and some people may feel the need!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Wears Craftsman hat but owns all harbor freight tools 😅
HF tools are perfect for dirt bikes
@@soggykid5580
Oh yeah says who?
Who gives a shit?
Craftsman tools aren't any better nowadays.
yooooooo I'm so early
Anyone know where to get those rails that are mounted to the trailer? The rail that the bike is sitting on.
Seems to do pretty well off road. Do you ever find yourself having clearance problems off road?
I currently have a box and a rtt on mine. I've towed it 2k miles so far and I've loved every minute of it. I've comfortably taken it up to 85mph and yes, it does leave the ground on some bumps. Also I bought my trailer in May 2020 and it did come with LED lights and I ran a ground to every light (I always have for every trailer) and I've had zero issues
I have pulled my 4x8 Harbor Freight trailer across the Country many times. They are as good as the assembly. Mine has been to California from Florida at least 5 times
Got me beat. Three times from Seattle to Texas Gulf with no problems. (Bearing Buddies installed).
Algoritme pleasing positive comment to improve your channel
I wish habor freight still sold these when I was getting a trailer. I like my 6x8 but 99% of the time I'm only hualing one bike and one of these would have been perfect.
They do but the price is quite high right now ($400). If supply chain issues clear up over the next year or so, hopefully they'll come back down in pricing. I originally purchased a 4x8 and sort of wish I would have gone with the smaller trailer at the time. Would have been a lot easier to store and deal with!
@@KestrelYI I know you can still get them, but for 400 dollars, I don't think they really make sense in most cases. I would have gone with the 4x8 for 100 dollars more if I hadn't found this 6x8 for 500.
@@KestrelYI I bought one may 2020 and paid $250 for mine but also waited a month from when I went in a pre-purchased it.
My future track day set up with a used prius.
Badass!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
so harbor freight gets a A. 50,000 miles towed. im buying 3.
Good looking dusty old bike there at the beginning of the video.
Hell yeah. Love it, im going to do something similar and this is good inspiration. Keep it up!!
Where did you get the motorcycle rails?
You could sell that trailer for more than you paid in this current climate!
Easily! My friend just sold his of the exact same model for $600. You could probably run a side hustle building and slinging these outfitted for bike hauling.
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Mine was like $300. Harbor freight doesn’t really have the %20 off coupons anymore.
Getting the job done easily and for low bucks. Love it!
the ironic thing about the chinesium masterlock knock-offs is that they offer about as much security as the genuine master brand locks.
Ha
Oh its good everyone! Countrys going down the toilet to china but go ahead buy that trailer
I thought of buying a small trailer kit but Illinois jacked up the yearly registration of trailers so high it just wasn't cost effective. "F" Illinois and their excessive taxes.
That is pretty annoying. Might be worth checking to see if you can have out of state registration on a trailer there
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
My family has had the 4x8 version of that trailer for nearly 20 years. It has been redecked probably 4 times, probably the same number of side rails on it. It has been loaded with multiple ATV's and dirtbikes at once, I even went to lower California and hauled a complete Ausin Mini Moke to Oregon on it. It has been up to Canada, down to New Mexico. It has been towed by every vehicle we have that has a tow ball on it. The trip from Vancouver Washington to New Mexico it was towed by a Ford Festiva to pick up the bare shell of a Austin Mini. We have bought numerous spare tires on these trips but have never needed them, it is still on it's ORIGINAL tires, we end up losing or misplacing the spared over the years... I have replaced the wheel bearings once due to it sitting for a number of years and the bearings rusted.
This one trailer that people have scoffed at has managed to convert many people into their versitality... My father even ended up buying one a few years ago after calling it junk for so long. The frame and suspension has never given us issues, had we not let it sit the bearings would probably have been fine. The biggest issue we have had with it over the years is wiring, but that is not the trailers fault but the guy not taking care of the pigtail or backing the lights into a pole :)
Built one like that 10 years ago for my buddy while we were in the Army. He pulled his YZF250 around with a Mitz lancer for years. Worked great.
Upgrade the fenders by passing 7/16" threaded rod though both sides and the frame. The are as thin as potato chips but I could stand on them with the extra support.
I had the Menards version for 18 years. I hauled an FZR600 and tons of building materials. I built interlocking sides out of 1x6s and abused it towing rock around the yard with the garden tractor.
I upgraded to bearing buddies and a spare tire. Sold it for what I paid for it.
Sorry to bust your bubble but I got four sets of those and those things do not open with each other's keys wish it did
And now it's 400$
Now they want $399.99 for a $100 Chinese trailer.
He spent $199 so we could spend $399 actually.
The biggest issue with them is the tires/wheels
The tires from harbor freight definitely aren't great but I don't fret running them if they're the only thing around because blowouts on this tiny thing don't cause a big ordeal. I've had two. On one I felt it start vibrating and pulled over to find the HF tire totally nuked, riding on the rim. On the other I never even noticed, or maybe I did and just turnt up the music lol. Got to where I was going and the sidewall was blown out and I was like well that's unfortunate! Didn't run down to the rim on that one. Haven't had a blowout on walmart tires. They wear down until the tire is bald. I'll try the cheaper Kendas next!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
Hey it’s Carnegie, sweet! And these trailers rock, I have one for my standup ski. 🤘🏼🤘🏼
Awesome video again
Thanks, glad you liked it!
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
So how big an enclosed trailer are you looking for? Just in case I win the Powerball….
Why not a hitch mount rack? I had an HF folding trailer for my dirtbike 20 years ago. If you use the hitch rack, you don’t have another axle on the ground. btw, nobody wants your trailer, but bike yes.
Dam, they go for $399 now... 🤕...
Those trailers are $399 right now!
130k on transmission and never changed the oil huh? Smh..Should have done maintenance to explorer when you first bought it
I bought the same unit and use it more often than my 7/14 enclosed trailer
It looks like u live in Utah do u?
Wow. What year is that KTM. I'm thinking it's 70's or maybe early 80's. Vintage bike 🤙
you are Likely Braking windshields on cars behind you - seriously - get some finders - old MX finders will work - look nice -ez mount - wont break
Yeah those locks are crap, can be picked easily in less than 10 seconds. Get some American lock. They are a little more difficult to pick .
Everyone that I know that bought that trailer has been happy with it.
Why not use vp race jugs
I literally just put this trailer together last week for my pit bike. It’s perfect for my needs. I even haul it with my small Toyota. I did put new grease in the bearings because people told me the grease it ships with is bad
Mine had the fenders crack to hell at the mounting points, easily fixed with a welder and some sheet metal to reinforce them so they don't bounce around and stress crack again.
Thumbs up at Ford Exploder 😆
I've been looking for a small trailer and not need to figure out if I want to go this route or the HD foldable trailer that stores really well. Thanks
I got that folder thirty years ago. ($72). Added Bearing Buddies right away. No problems yet. Good choice.
When is your next race
Probably June. The 10 hour endurance race at Glen Helen. I am probably going to do it with my friends again like last year
If you enjoy the content please check out my "best ways to support" page on my website which shows how to support the channel for free! Thanks!
torturetestmagazine.com/pages/best-ways-to-support-ttm-some-are-free
I know you probably don’t have it anymore, especially after the torture test videos.
But when you mentioned the locks, look into ones by Bolt. They use your vehicle key, which you will probably always have with you.
So you can buy a hitch pin for your receiver, the tongue lock, cable lock, padlocks and they all use your vehicle key. So one key for everything. And it’s a little bit harder to pick since it’s a vehicle key and not just a padlock key.
A lot of convenience without having to worry about what key goes to what. All your tubs, hit, cable lock can all be the same
'$199' , come on , it's $200 .
No fear on the random thief stealing the trailer they’ll just cut your cat off for 10x the value but no guarantee on the desalt bins and the bike unless it’s a chinesium nockoff ?
Lol 😂
I stuffed my 97 yz250 into a 1993 Saab 900. I didn't have a truck for years.
Yoyoyo...... will this trailer withstand a CR500 ported n' polished, squishy band thingy, with triple platinum gold dust FMF Fatty Pipe? Rip yo arms outta yo sockets, bro!
Where do you get those motorcycle rails?
Yeah that trailor is crap.. I bought a 6x6 and tore it apart and upgraded the wheels.. I then welded square stock made it bigger.. Keep your eye open for a used trailer marketplace.. Im hauling two quads side by side and 2 bins.. I have some metal to enclose another one i just bought..
How tight do you turn the bolts? There are no torque specs anywhere except for the wheel itself...some of sheet metal bends with no force at all like the two 19mm that holds the leaf springs on....also the u-bolt spring plate bends quite easily when torquing down....any advice?
Tights tight, too tights broken! Use some locktight. If things are bending your over tightening stuff.. Weld corners for better grounding for lights and maintenance man!
I like the setup I have the same trailer I also have my motorcycle mounted to that trailer the crazy differences I pull it with a Honda Goldwing 1500 motorcycle
Something seemed off in this and then I looked at the channel name again and it was not Torque Test Channel.. I was wondering why torque test channel would make Harbor Freight trailer review. My bad.
You get what you pay for …..especially when buying Chinese ….uh…….stuff. My experience is that you need to modify most of those things to make them work properly.