Nice machine! I have the same stihl fs 460. I have some problem with it. In taller Grass like this, i Always lose the trim. In the trimhouse trims are melted a bit. What do you suggest?
Hello I think both trimmer heads are good but me personally i prefer the autocut because i don’t need to change the trimmer line so often, durocut 40-4 it’s good in big grass with 4 trimmer lines with a bigger machine,🙋♂️
Hi Csabi! Nice video as always😉 Which trimmerhead do you think cutts thick tall grass better the autocut 46-2 with cf3 pro line or the durocut 40-4 with stihl precuted 4mm suraded edge line?
Ce frumos toarce motorul ala ,cum ti se pare duro cutul fata de autocut 47 ,eu din ala am pe fs 311 a mea cu fir rosu stihl de 2,7 mm ,o sa incerc si firul ala mai gros ,chisr m-ai facut curios .Durocutul ala e compatibil cu fs 311 ,mi-ar fi util la balariile de pe vale .Si ca incheiere ar trebui sa ii dai jucarioara ta cuiva care lauda pana la cer mizeriile de motocoase cu 400 lei .Zi senina si spor la treaba .
Salut, merci sincer prefer autocut e mai practic, dar dupa cu vezi in video tai f bine si cu durocut da e compatibil Fs 311 merg la fel ca si pe a mea 2 fire de 4 mm , dar la cine te referi ca nu stiu , merci la fel o zi placuta.
Hello durocut it’s an amazing trimmer head but I prefer autocut because it’s more practical, i don’t have to change the trimmer line that often, durocut it’s more suitable for bigger grass like in my video in the last part, 🙋♂️
Hello yes you are right I’m preferring to the autocut it’s way more practical you don’t have to change the trimmer line that often, 🙋♂️ but the durocut also it’s a good trimmer head.
i also used speedfeed 450 but you have to be very careful not to touch anything hard(like rock,tree,concret etc)when running full speed with this brushcutter, i broke my speedfeed head into pieces 2-3 times.
Nice machine! I have the same stihl fs 460. I have some problem with it. In taller Grass like this, i Always lose the trim. In the trimhouse trims are melted a bit. What do you suggest?
Hello with my brushcutter I never occurred this problem, probably you don’t have enough grease in your brushcutter head and that way it’s overheating, I think you should take it to a service and check it out, good luck 🙋♂️
Bravo 👏
Multumesc 😊
Super tare motocoasa asta și capul e bun pt iarba asa mare 👍 era bună casca aia stihl sa te protejezi la fața la asa lucrări cu bălării ✋
Salut Andrei, da ai dreptate nu m-am grandit ca o sa stropeasca asa tare, acest cap a mers f bine impreuna cu motocoasa, te salut 👋
Powerful machine sir 💪
Hello yes indeed , my favorite brushcutter 🙋♂️
Aser grupo wuasa
🙋♂️
Good job 🍻🍻
Thanks 🙋♂️
Kolay gelsin.460 yeni aldım.bunlarda ilk çalıştırma nasıl oluyor.rodaj bir depo bostami yakacağım yoksa direk tempolumu başlatacağız
Hello, congratulations for your purchase, you let it for 5 minutes to warm up and with the first two fuel tank you will not cut at maximum power ,🙋♂️
Nice Video broooo👍🙌
Thanks 😊 🙏 my friend.
Guena maquina tengo una igual
Yes, one off my favorite machine,🙋♂️
250fs full tank petrol only 1hour running i think less millage and power also little bit why is any problem tuning
Nice machine! I have the same stihl fs 460. I have some problem with it. In taller Grass like this, i Always lose the trim. In the trimhouse trims are melted a bit. What do you suggest?
Sorry for the dubble post but now i,d like to know which trimmerline you think cuts the grass better!😁
Hello definitely the Stihl CF3 pro but also the Stihl black round and square are very good.
Hi Csabi!
Do you think the durocut 40-4 or autocut 46-2 trimmerhead are the best cuttinghead in thick tall grass?
Hello I think both trimmer heads are good but me personally i prefer the autocut because i don’t need to change the trimmer line so often, durocut 40-4 it’s good in big grass with 4 trimmer lines with a bigger machine,🙋♂️
Hi Csabi!
Nice video as always😉
Which trimmerhead do you think cutts thick tall grass better the autocut 46-2 with cf3 pro line or the durocut 40-4 with stihl precuted 4mm suraded edge line?
Hello personally I prefer the autocut, but if you have a big machine like Fs 511 560 561 I think the durocut 40-4 it’s more suited for that job ,🙋♂️
Ce frumos toarce motorul ala ,cum ti se pare duro cutul fata de autocut 47 ,eu din ala am pe fs 311 a mea cu fir rosu stihl de 2,7 mm ,o sa incerc si firul ala mai gros ,chisr m-ai facut curios .Durocutul ala e compatibil cu fs 311 ,mi-ar fi util la balariile de pe vale .Si ca incheiere ar trebui sa ii dai jucarioara ta cuiva care lauda pana la cer mizeriile de motocoase cu 400 lei .Zi senina si spor la treaba .
Salut, merci sincer prefer autocut e mai practic, dar dupa cu vezi in video tai f bine si cu durocut da e compatibil Fs 311 merg la fel ca si pe a mea 2 fire de 4 mm , dar la cine te referi ca nu stiu , merci la fel o zi placuta.
Salut Ciobi. Se pot folosi durocut astea si cu cea electrica?
Salut se poate folosi dar un cap mai mic durocut 20-2 .
250fs machine which rope is best bro,, 3.5mm or 3.4mm and which rope is best,, in my estate more stone and all so pls suggest me
Hello for me the best trimmer line it’s Stihl cf3 pro 3,3 mm diameter.
@@CsabiTools thanks bro
Wich you like more - autocut 46-2 or durocut 40-4, and why? :)
Hello durocut it’s an amazing trimmer head but I prefer autocut because it’s more practical, i don’t have to change the trimmer line that often, durocut it’s more suitable for bigger grass like in my video in the last part, 🙋♂️
Tu ce inaltime ai?
Salut 1,86.
Cînd mai apare videouri cu sthil fs55??
Salut o sa mai fie dar putin mai incolo in cateva sapt, te salut.
I don't like the Duro-Cut heads. I like the Auto-Cut 40-4 for higher powered machines or a Speedfeed 450.
Hello yes you are right I’m preferring to the autocut it’s way more practical you don’t have to change the trimmer line that often, 🙋♂️ but the durocut also it’s a good trimmer head.
i also used speedfeed 450 but you have to be very careful not to touch anything hard(like rock,tree,concret etc)when running full speed with this brushcutter, i broke my speedfeed head into pieces 2-3 times.
I mount the 350mm shredder blade on top of the speedfeed 450 for extra tough weeds and small brush.
esta Sthil es buena ya qe es alemana el resto de las Sthil son chinas
Grazias 🙋♂️
@@CsabiTools la Sthil fs 460 es buena ya qe viene de alemania
I like to use a face shield when cutting that kind of stuff.
It was so hot that I decided to use only sunglasses , 🙋♂️
La tine in gospodarie cosesti atata ? :))
Salut si la mine si si la vecini 🙋♂️
incearca si cu disc red mountain
Salut ce fel de disc este ça nu cred ça il cunosc dupa denumire.
@@CsabiTools salut Csabi. disc cu videa japonez. foarte bun. are pastile videa mari si se uzeaza greu.
Super, o sa incerc merci 🙋♂️
@@CsabiTools bună,discul se numește REDMOUNTANI
Nice machine! I have the same stihl fs 460. I have some problem with it. In taller Grass like this, i Always lose the trim. In the trimhouse trims are melted a bit. What do you suggest?
Hello with my brushcutter I never occurred this problem, probably you don’t have enough grease in your brushcutter head and that way it’s overheating, I think you should take it to a service and check it out, good luck 🙋♂️