Buna intradevar e putin grea dar in schimb e f puternica. Detin si eu acel model de la husqvarna e f buna iti faci treaba bine cu ea. Te salut o zi placuta !!!
Hello 👋 I’m soaking the line in water because it will give more flexibility and durability to the line every person should do that before cutting with trimmer line.
@@CsabiTools here in my country in the Philippines cutting grass here is very tough because of our climate I'm cutting 5 feet tall grass weeds brush I'm only using Kawasaki td40 it's no that powerful but it's better than nothing sad to say it's not enough to get the job done you need to repeat again and again ,😒😞
@@archimdejesus3188 I believe you here in my country in Romania it's almost winter until next spring the month of May I have nothing to cut i will make a pause with the brush cutters be strong i wish you a good job with the Kawasaki take care 🙂
Buna hp ultra este biodegradabil si arde in totallitate si nu lasa reziduri deloc pe piston si pe bujie iar hp super este un ulei low smoke care nu scoate fum mai deloc.
esta mal ajustado el arnés que llevas puesto ése protector de apoyo es más arriba es a la altura dd la cadera el pesó de la máquina no está equilibrada lo te causa incomodidad en los brazos y piernas sobre todo la derecha
Buna parerea me poti sa treci linistit e cel mai bun ulei de amestec de la Stihl e biodegradabil si nu lasa reziduri pe piston si bujie deloc. Te salut o seara placuta.
Salut Csabi! Draguț capul de taiere, dar simt că nici pe tine nu te încântă foarte mult. Eu am o motocoasa FS94, mult mai mică si am zis sa incerc Durocut 20-2, ce i se potriveste ei. Capul de tăiere este mult mai greu decât un Autocut, deci accelerări mai grele. Pentru o motocoasa de 1 CP se simte. Practic consumi mai mult fir. Portiunea ce intra in capul tăietor, e pierduta. In plus, trebuie sa schimbi firul mereu când se tocește. Cu un Autocut nu ai problemele astea. Am testat, am cheltuit, il am, dar nu îmi face cu ochiul. La ce am eu, FS94, un Autocut cu CF3 Pro de 2,7 e fix ce am nevoie. Spor la treabă.
Salut Bogdan sincer iti dau perfect dreptate eu am cumparat durocut-ul ça sa il testez si sa vad cum merge, de mers merge ok dar tot mai mult ma atrage autocut-ul, cum ai zis tu nu trebuie sa schimbam firele si asa mai departe, durocut e bun in buruieni mai mari si urzici, la fel si eu il folosesc foarte rar, te salut si spor 🙋♂️
I will definitely check it out i own the Stihl Fs 560 for 3 years and in 3 years I bearly used for approximately 10-15 hours. Thanks a lot have a nice day.
@@CsabiTools Cool, I have just bought another 2! Awsome machines. Get the Xtreme harness, it’s brilliant and great for grass in summer and forestry work in the winter. I was watching another of your videos with the 460 and 545! You both need to set your harnesses correctly as you are both leaving a ‘ saw tooth’ finish!! lol. That strimming line on the 460 I awsome and I use it on all our machines 2.0 mm - 3.3mm . Sadly in the Uk we cannot buy it on big reel😡Well done with all your videos 👍👍 Jonny
@@cuttingwoodagain tanks a lot I really appreciate your advice 🙏 I have already the Xtreme harness it's brand new i ordered from the UK 🇬🇧 i will use it in my next video with the fs 560 c 😀
@@CsabiTools Great, you will really appreciate it, it’s a lot more comfortable and fits perfectly👍👍 Just watching your video of you 560 and stredder head! You are doing exactly what I did until I was shown by a Stihl Uk demonstrator. I was on and off the throttle when doing exactly what you did in your video! No, Rev the machine constantly and ‘go’ for it! Do not be worried about damaging the machine, it is designed to be revved so go for it. By reving it you are also Lessing the vibration so try it! Yes, it sounds a nightmare as I don’t like stressing my machines but believe me it’s 👍 I have a early 2014 560 and has done 2700 hrs! no problem. Routine services every 100hs - spark plug, air filter and grease clutch bearing, main shaft and gear box. Use Stihl Ultra oil in mtronic engines especially 4 mix engines. Keep valves adjusted on 4 mix every 100Hrs Just bought Ms881! Should be interesting, it’s got a lot of work too do! Well done and take care bud. Thanks. You got a email address? Am Jonny. Great channel👍👍👍
Numa cum sună la relanti se vede că e o bestie puternica🥰🥰🥰
Da da , cea mai puternica motocoasa de la Stihl.
Scule de scule la tine pe canal.. O căruța de bani.. Dar u cu asta a-ți faci banii.. Și nu te lasă la greu.. Stimă și respect
Multumesc, intr -adevar toate sant din gama profesionala si sant multumit de ele te salut 🙋♂️
Brand new machine, That's my dream machine, very strong
Yes indeed I really enjoy working with the machine, very powerful 😀
Sthil hp super olaj 😀✌💪
Numai scule de scule văd pe canal la tine . Imi place toată activitatea ta un mare LIKE 🤝👏👏
Multumesc mult te salut 🙋♂️.
@@CsabiTools cum ești pe facebook? S-au un număr de tel pe care ai wattap
@@CsabiTools Ms 🤝🤝🤝
Good
Aia da motocoasa, dar și grea! Am cumparat de la husqvarna 545rx....Te salut, bun video!👍👍💪
Buna intradevar e putin grea dar in schimb e f puternica. Detin si eu acel model de la husqvarna e f buna iti faci treaba bine cu ea. Te salut o zi placuta !!!
Köszi a választ énis eszt az adalékot használom meg 100as benzint. Nagyon jó megy vele.
Szivesen 🙋♂️.
This is a Monster Power Machine
Hello, yes indeed very powerful brushcutter.
Have no garden or so but loved it, great content m8 :0)
Thanks 🙋♂️
So really beautiful
Thanks for your kind words and I appreciate it.
ez a gép egy szörny. nagyon komoly.
Hello, igen egy komoly es eros gep ua-cam.com/video/f-h_o4cb0sA/v-deo.html itt van ey masik video ahol latni lehet az igazi erejet.
норм аппарат!!!
Expensive machine
Yes it’s expensive, approximately 1500 € ,🙋♂️
👍
Koszi !!! 😉
Place fs560 ....
Foarte putere
Da intradevar f puternica te salut 🙋♂️!!!
just ask a question why your soaking the line in the water
Hello 👋 I’m soaking the line in water because it will give more flexibility and durability to the line every person should do that before cutting with trimmer line.
@@CsabiTools thank you for sharing it nice I'll do that too thank you very much 👍
I’m glad that I could help. 😉
@@CsabiTools here in my country in the Philippines cutting grass here is very tough because of our climate I'm cutting 5 feet tall grass weeds brush I'm only using Kawasaki td40 it's no that powerful but it's better than nothing sad to say it's not enough to get the job done you need to repeat again and again ,😒😞
@@archimdejesus3188 I believe you here in my country in Romania it's almost winter until next spring the month of May I have nothing to cut i will make a pause with the brush cutters be strong i wish you a good job with the Kawasaki take care 🙂
Care ulei de amestec este mai bun hp super sau hp ultra??multumesc
Salutare, hp ultra ,🙋♂️
hello. what is the fuel consumption per hour in this mode of operation?
Hello approximately 1 liter/ hour,🙋♂️
Hi, does buying the stihl advance harness will be good upgrade?
Hello, definitely it's a very good harness, I use it specially with my bigger machine fs 511 560 561,greetings
Lucru de calitate
Salutare.
what harness do you recommend??? thanks in advance
Hello, I’m using Stihl advance plus on a daily basis and I’m satisfied with it,🙋♂️
@@CsabiTools thanks man
est ce que il faut mettre le disque de protection ?
Oui a chaque fois quand on utilise la debrusailleuse.
Biztos erősebb mint a damil. 460 kaszára jó ez?
Hello egy kicsit erosebb mint a damil, 460 kaszara is jo, de 460 kaszara csak 2 darab damilt tehetsz. 🙋♂️
Iarbă este foarte tăiat
🙋♂️
Stihl weed cutter machine,, which oil is best bro hp super or hp ultra
Hello in all my brushcutter and chainsaw I use Stihl hp ultra.
@@CsabiTools i have recently taken 250fs weed cutter machine,, but not that much power in high grass why,, is there any tuning argest problem
Hello sorry not that i know there it’s no tuning for that brushcutter .
👍👍👍😀🇧🇾
🙋♂️
Care este diferența intre hp ultra si hp super ?
Buna hp ultra este biodegradabil si arde in totallitate si nu lasa reziduri deloc pe piston si pe bujie iar hp super este un ulei low smoke care nu scoate fum mai deloc.
esta mal ajustado el arnés que llevas puesto ése protector de apoyo es más arriba es a la altura dd la cadera el pesó de la máquina no está equilibrada lo te causa incomodidad en los brazos y piernas sobre todo la derecha
🙋♂️
Te salut eu am 360 cm si folosesc ulei hp 20 ml la litru si vreau sa trec pe ultra hp ce zici??
Buna parerea me poti sa treci linistit e cel mai bun ulei de amestec de la Stihl e biodegradabil si nu lasa reziduri pe piston si bujie deloc. Te salut o seara placuta.
Ai grijă la depuneri dacă treci la ultra stimă și respect
Salut Csabi!
Draguț capul de taiere, dar simt că nici pe tine nu te încântă foarte mult. Eu am o motocoasa FS94, mult mai mică si am zis sa incerc Durocut 20-2, ce i se potriveste ei. Capul de tăiere este mult mai greu decât un Autocut, deci accelerări mai grele. Pentru o motocoasa de 1 CP se simte. Practic consumi mai mult fir. Portiunea ce intra in capul tăietor, e pierduta. In plus, trebuie sa schimbi firul mereu când se tocește.
Cu un Autocut nu ai problemele astea. Am testat, am cheltuit, il am, dar nu îmi face cu ochiul. La ce am eu, FS94, un Autocut cu CF3 Pro de 2,7 e fix ce am nevoie.
Spor la treabă.
Salut Bogdan sincer iti dau perfect dreptate eu am cumparat durocut-ul ça sa il testez si sa vad cum merge, de mers merge ok dar tot mai mult ma atrage autocut-ul, cum ai zis tu nu trebuie sa schimbam firele si asa mai departe, durocut e bun in buruieni mai mari si urzici, la fel si eu il folosesc foarte rar, te salut si spor 🙋♂️
I have 5 of these and just bought another! I think you’re machine needs a tune mate! Sounds very under powered!!???
I will definitely check it out i own the Stihl Fs 560 for 3 years and in 3 years I bearly used for approximately 10-15 hours. Thanks a lot have a nice day.
@@CsabiTools Cool, I have just bought another 2! Awsome machines. Get the Xtreme harness, it’s brilliant and great for grass in summer and forestry work in the winter. I was watching another of your videos with the 460 and 545! You both need to set your harnesses correctly as you are both leaving a ‘ saw tooth’ finish!! lol. That strimming line on the 460 I awsome and I use it on all our machines 2.0 mm - 3.3mm . Sadly in the Uk we cannot buy it on big reel😡Well done with all your videos 👍👍 Jonny
@@cuttingwoodagain tanks a lot I really appreciate your advice 🙏 I have already the Xtreme harness it's brand new i ordered from the UK 🇬🇧 i will use it in my next video with the fs 560 c 😀
@@CsabiTools Great, you will really appreciate it, it’s a lot more comfortable and fits perfectly👍👍 Just watching your video of you 560 and stredder head! You are doing exactly what I did until I was shown by a Stihl Uk demonstrator. I was on and off the throttle when doing exactly what you did in your video! No, Rev the machine constantly and ‘go’ for it! Do not be worried about damaging the machine, it is designed to be revved so go for it. By reving it you are also Lessing the vibration so try it! Yes, it sounds a nightmare as I don’t like stressing my machines but believe me it’s 👍 I have a early 2014 560 and has done 2700 hrs! no problem. Routine services every 100hs - spark plug, air filter and grease clutch bearing, main shaft and gear box. Use Stihl Ultra oil in mtronic engines especially 4 mix engines. Keep valves adjusted on 4 mix every 100Hrs Just bought Ms881! Should be interesting, it’s got a lot of work too do! Well done and take care bud. Thanks. You got a email address? Am Jonny. Great channel👍👍👍
Hi Jonny thanks for the precious information this is my email address csabitools@yahoo.com.
c est normal que ma débrousailleuse va de travere quand je fais de bas en haut ?
Salut non c’est pas normal, ton debrusailleuse c’est quelle marque. C’est du Stihl ?
szar vágás
Ok, koszi az oszinte velemenyt.