Hey just wondering if you think this tornado v3 set up would be good -tornado v3 pioneer -speedy -DNM 37 -silk -mystic -weight 4 I am looking for fast silky stable but not to gummy feel what lubes do you think I should get rid of and what should I add? Thank you.
personally i think those lubes are all pretry good, if you want something thats fast and stable i would recommend something along the lines of my video (use either mystic or speedy, i dont recommend combining them - same with silk and weight 4) but the biggest thing is speedy and silk are more plush, mystic is very fast in general, and weight4 can be allrounder as long as u dont dump it in there personally i would probably use speedy, dnm, weight4 or mystic, silk, dnm (dont put a lot of any of the silicone lubes because it'll make the cube feel very gummy, dnm and mystic will just make the cube faster if you add alot) and if you want a fast, plushcube while not being gummy i would recommend gettinf gravitas/dignitas because the gummy feel only exists during the break-in period
nice video, I see you are helping everybody in the comments section, my situation is X-man v3 pioneer, My lubes are stardust lubicle speedy moyu v1 maru milk gan standard gan magic lube I find 3-3 is too loose, but I don't know which lubes are fast and slow, besides stardust and lubicle speedy, I tend to prefer cubes on the slightly faster end and since you are ridiculously fast I was wondering what wou would recommend, have you tried the pioneer or should I just trial and error a lot?
pioneer's pretty similar to the flagship from what ive heard, and im only familiar with lubicle speedy and maru, im guessing you could probably dump speedy in to slow it down a bit and then add stardust to counteract it? for ur tensions and stuff, the one more tighter on the compression could help in whatever way to make it tighter idk the adjustment numbers
yes, but you can use weight 3/5 and weight 1 as substitutes (traxxas 30k/50k and 10k) if you have xmt 10 its pretty much the best lube in the world so use it
its not necessary, but it can make getting a certain feeling or speed easier. if you were to get a singular lube, i'd recommend weight5/traxxas 50k due to its ability to be fast or slow otherwise i used lubicle speedy, silk, and dnm on this video
Hey i am from india i don’t have access to most of the lubes u suggested i can get mystic , silk and dnm tho . Can u suggest me which one i should get or more than one . And which parts to lube each of them. Thank you very much for replying loved your video.
@@warmonger9915 if you get all 3, just follow what i did but change the red lube for mystic in my opinion, silk and dnm is a solid option as well, and you would just put 2 drops and add some dnm
hmm... i was thinking about getting a new cube and ive been eyeing the tornado. did you have to use it a lot to like it or did you immediately like it?
@@mickeyhaha._. so the way i originally had it was on stock lube, no setup and when i tried to switch back to my WRM 2019 it felt too unstable. i kinda just kept using it and got used to it
Heyy! To lube my tornado v3 should i use 1.Cubicle Labs Silk 2.Mystic 3.DNM-37 Which of these would you recommend using/ which lubes should i add Note : these are the only lubes i have rn
u can use all 3 since its pretty much gonna be the mystic setup so pretty similar just put silk on the bottom corner feet thing and then mystic normally
most likely, i havent heard too good of reviews on the mgc v2 (if u avg like 30, it might drop ur times by 5 seconds) so i would recommend the flagship because im assuming u dont need the pioneer at ur current speed
so i would recommend using weight 5 on the corner feet (the thing that protrudes) but dont put a lot because itll slow down the cube a lot, and then add a tiny bit of silk or weight 1 where i put speedy (silks much slower than weight1 or speedy so use that if you want it slower) you could also add more lube than i did, add dnm, and break it in to make it slower since i personally like my cubes faster
uh dont use wet wipes on the screws/metal stuff because it could rust if you don't dry them immediately, as well as alcohol is kinda a weird thing for cubes in my experience but it should be okay i just use a tissue because its easy and im lazy, some people use a towel
Finally a reason to mess with my cube settings
op setup
this is my first vid that i have seen on ur channel and i already know this is going to be what i binge watch all night
LETS GOOOOOOOOOOOO
Hoooly W TUT
Great vid🎉
bashy + tornado v3 = yt alg buff
hit alg pls
Nice video
thanks
nice
i got u
thanks mr kiwi kiri kirwri spookywri kywri
oi it went kiri then kiwi then kiwri then spookywri then kywri
Hey just wondering if you think this tornado v3 set up would be good
-tornado v3 pioneer
-speedy
-DNM 37
-silk
-mystic
-weight 4
I am looking for fast silky stable but not to gummy feel what lubes do you think I should get rid of and what should I add? Thank you.
personally i think those lubes are all pretry good, if you want something thats fast and stable i would recommend something along the lines of my video (use either mystic or speedy, i dont recommend combining them - same with silk and weight 4) but the biggest thing is speedy and silk are more plush, mystic is very fast in general, and weight4 can be allrounder as long as u dont dump it in there
personally i would probably use speedy, dnm, weight4 or mystic, silk, dnm (dont put a lot of any of the silicone lubes because it'll make the cube feel very gummy, dnm and mystic will just make the cube faster if you add alot)
and if you want a fast, plushcube while not being gummy i would recommend gettinf gravitas/dignitas because the gummy feel only exists during the break-in period
@@kiwisolvescubes thank you this help me out alot
very nice video mr kiwi
thank you mr bean
Lol the settings you use are the exact same as my flagship
buff settings
nice video, I see you are helping everybody in the comments section, my situation is
X-man v3 pioneer,
My lubes are
stardust
lubicle speedy
moyu v1
maru milk
gan standard
gan magic lube
I find 3-3 is too loose, but I don't know which lubes are fast and slow, besides stardust and lubicle speedy, I tend to prefer cubes on the slightly faster end and since you are ridiculously fast I was wondering what wou would recommend, have you tried the pioneer or should I just trial and error a lot?
pioneer's pretty similar to the flagship from what ive heard, and im only familiar with lubicle speedy and maru, im guessing you could probably dump speedy in to slow it down a bit and then add stardust to counteract it?
for ur tensions and stuff, the one more tighter on the compression could help in whatever way to make it tighter idk the adjustment numbers
@@kiwisolvescubes thank you, even though you only have a vague understanding of my situation you are freaking awesome! thank you
And btw what lube did you use is that silk and speedy?
yes, but you can use weight 3/5 and weight 1 as substitutes (traxxas 30k/50k and 10k)
if you have xmt 10 its pretty much the best lube in the world so use it
Is it necessary to apply more than one lube ? If yes which ones do u suggest cause m thinking of getting the tornado v3 so ill buy the lubes together
its not necessary, but it can make getting a certain feeling or speed easier.
if you were to get a singular lube, i'd recommend weight5/traxxas 50k due to its ability to be fast or slow
otherwise i used lubicle speedy, silk, and dnm on this video
Hey i am from india i don’t have access to most of the lubes u suggested i can get mystic , silk and dnm tho . Can u suggest me which one i should get or more than one . And which parts to lube each of them. Thank you very much for replying loved your video.
@@warmonger9915 if you get all 3, just follow what i did but change the red lube for mystic
in my opinion, silk and dnm is a solid option as well, and you would just put 2 drops and add some dnm
hmm... i was thinking about getting a new cube and ive been eyeing the tornado. did you have to use it a lot to like it or did you immediately like it?
i didnt really like it at first, i was definitely averaging faster on it when i got it but i didnt like the feeling, but now i enjoy it alot
@@kiwisolvescubes how did you get over not liking the feeling? did you just set it up with some lube or did you just have to get used to it
@@mickeyhaha._. so the way i originally had it was on stock lube, no setup and when i tried to switch back to my WRM 2019 it felt too unstable. i kinda just kept using it and got used to it
@@kiwisolvescubes i see i see
Heyy! To lube my tornado v3 should i use
1.Cubicle Labs Silk
2.Mystic
3.DNM-37
Which of these would you recommend using/ which lubes should i add
Note : these are the only lubes i have rn
u can use all 3 since its pretty much gonna be the mystic setup so pretty similar just put silk on the bottom corner feet thing and then mystic normally
if u want a slower cube use more silk than mystic or just silk alone
I have YJ mgc v2. Is switching to tornado v3 flagship or pioneer worth it? And which version should I choose if yes?
most likely, i havent heard too good of reviews on the mgc v2 (if u avg like 30, it might drop ur times by 5 seconds) so i would recommend the flagship because im assuming u dont need the pioneer at ur current speed
Hey i have a doubt….
How will the weight 5 dnm 37 and silk work?
Or should i use weight 1?
so i would recommend using weight 5 on the corner feet (the thing that protrudes) but dont put a lot because itll slow down the cube a lot, and then add a tiny bit of silk or weight 1 where i put speedy (silks much slower than weight1 or speedy so use that if you want it slower)
you could also add more lube than i did, add dnm, and break it in to make it slower since i personally like my cubes faster
so anyone saw the amoungus on a cube in the background?
sus
Bro tw is it okay to clean mg cube using a wet wipes?
uh dont use wet wipes on the screws/metal stuff because it could rust if you don't dry them immediately, as well as alcohol is kinda a weird thing for cubes in my experience but it should be okay
i just use a tissue because its easy and im lazy, some people use a towel
Do you have catch up after this set up or no?
it catches if im not warmed up since my turning sucks
what if i dont want to remove lube? And i need smooth and fast cube
dnm, break in cube, idk its way easier when you have a clean slate
should i get this cube or gan 13 maglev or j perm rs3 or diensheng cube please help i watch all your videos i want to be sub 5
personally im more of a fan of the ethan cho granite coated mf3rs3m
@@kiwisolvescubes thanks for the advice i already beat my pb of 1:48 with a new pb of 1:47 😇😇😇😇😇😇😂😂😀😎😎😎😎😄
@@ethancho1 no way ur a fan of hunter jones too?????????
What is the settings in the spring?
1:44