The actual panda lux light bar looks NOTHING like the one he showed. The actual one you get puts out about the same light as the stock one. Very disappointing.
Great collection of products, but I have been disappointed with the SKSM. I got my hands on mine last week. The hardware is pretty good, with nice big capacitors for storage. Firstly, it's 5V output only, so no park and power-off support like the older BTT UPS 24V. That's fine, as it is intended only to power your Raspberry Pi for long enough for it to shutdown cleanly. Pulling the rated 2A only briefly made the coils whine loudly, so I wouldn't use it to power a Pi 4 or 5. That's all fine, but where it gets weird is with how the firmware runs things. There are two 5V outputs: A USB type-A plug and a 5-pin JST PS2 header, and you HAVE to use them both. The JST carries the 'power bad shutdown now' signal that you connect to a GPIO pin, but the power on that cable is only available 'sometimes'. There is a 30 second delay after connecting 24V (even when the caps are already full) and it cuts out 13 seconds after the 24V goes down (again, even if the caps are still full). All in all, it feels like a clumsy beta project. I was looking to add them to all my builds, but I now think I'll hold back a while. Maybe these issues can be fixed in version 2? It has a lot of potential, and maybe the awkwardness can be fixed in firmware.
I was sent a panda touch to test and it's ok, but just like the p1p I have it's missing folders for the usb flash so I can organise files I print for customers. They did add print again if you print from the panda touch so I hope they take my suggestion for folders on board.. Then I would be happy and use it all the time.
What do you want to see from btt next ?
AWD cnc kit
Stealthchanger CNC kit
CNC 9mm AWD
Open sourcing the Chaotic Labs stuff
im just glad to see theres confirmation that hevort is still alive
It's been cool seeing BTT really embrace this scene, they really go make good hardware
Man I love BTT lol, I know they make new boards as often as most people breath but I love their products lol
BTT always innovating and looking for ways to make custom setups easier, cleaner and more fun.
BTT is a very interesting company with very useful products and lots of potentional.
Could be interested by their cpap thing but i can’t find it on their website
I can’t see it either, maybe it’s pre release?
SKSM work with a M8P V2 CB1?
The actual panda lux light bar looks NOTHING like the one he showed. The actual one you get puts out about the same light as the stock one. Very disappointing.
I think BTT is quite faithful to its phrase of for maker by makers
Man, BTT really has conquered the market when it comes to mods and stuff for your printers.
That CPAP setup looks like a good candidate for my Sherpa equipped SuperRacer projects.
Ι wish Eddy worked with embedded magnets. I would upgrade all my printers with it
Great collection of products, but I have been disappointed with the SKSM. I got my hands on mine last week. The hardware is pretty good, with nice big capacitors for storage. Firstly, it's 5V output only, so no park and power-off support like the older BTT UPS 24V. That's fine, as it is intended only to power your Raspberry Pi for long enough for it to shutdown cleanly. Pulling the rated 2A only briefly made the coils whine loudly, so I wouldn't use it to power a Pi 4 or 5.
That's all fine, but where it gets weird is with how the firmware runs things. There are two 5V outputs: A USB type-A plug and a 5-pin JST PS2 header, and you HAVE to use them both. The JST carries the 'power bad shutdown now' signal that you connect to a GPIO pin, but the power on that cable is only available 'sometimes'. There is a 30 second delay after connecting 24V (even when the caps are already full) and it cuts out 13 seconds after the 24V goes down (again, even if the caps are still full).
All in all, it feels like a clumsy beta project. I was looking to add them to all my builds, but I now think I'll hold back a while. Maybe these issues can be fixed in version 2? It has a lot of potential, and maybe the awkwardness can be fixed in firmware.
I was sent a panda touch to test and it's ok, but just like the p1p I have it's missing folders for the usb flash so I can organise files I print for customers. They did add print again if you print from the panda touch so I hope they take my suggestion for folders on board.. Then I would be happy and use it all the time.
The macro board with the rp2040 could also be nice as a standard macro pad for a pc. Just flash it with QMK and go
Okayyyy sooo I've been looking for the Knomi2 cpap toolhead for weeks...Where can I find the stl???
Great video! Love to see all the new stuff coming from BTT
Do I sound weird for wanting that black duck?
Why did this have to come out 4 days after I ordered a Beacon ;_;
Dude is a consumate salesman
The annex engineering tradrack 1.0 mmu released recently but I haven't seen anybody talking about it. Do you have any plans on building one?
I don't build printers and was still impressed with that lineup of products. They are very much building what gets requested.
Kinda sad that they used "Panda" for Bamboo printers, but it makes sense.
I can’t find the CPAP control! Turbo?.
Does the coil eddy plugs into the sb2240 board ?
12 gate mmb?
BTT is on the ball.
Take my money!!!