Damn keep all this info coming because it is good shit. I like the way your channel is going because this type of nitro info you are not going to be able to pay for it, it takes someone with the passion for it to let the people know!
Great video rajaa. Thanks for the info brotha. I have a question for you. What do you think about the novarossi karma engine. I would like to hear what you think. Thanks
The karma was similar to the keep off 4, it’s a .21 and great on the gas mileage if your using it to race. I never had one but I do have the Keep off 4 and that’s a great engine
Bruva your videos are a great help for anyone trying to get into this Hobby, like myself. I wished you lived by me lol. I have a question, I have a old rc touring car 1/10 3 speed Schumacher fusion 21, with a thunder tiger pro 21 r engine (with a 180 degree clutch 2 shoes) . Would I be able to upgrade to a 3 or 4 shoe clutch. Thanks for all your help and keep up the good work 👍🏾
Good info here man getting ready for my Nova Rolling I’m going to need either a rebuild or new clutch. Looks like aMain has TLR prebuilt I may go with black flywheel different then my original blue they say better? Or I can just go with a rebuild kit seems cheaper to get whole new clutch and comes with flywheel if I do rebuild what shoe/ spring combo you recommend for Rolling .21 7 port in 8ight T 2.0 thanks bro
Well the black flywheel is steel, that would have the clutch spin up a little slower, it helps with wheel spin if you clutch has too much bite. Nothing wrong with the pre built clutch from losi its a great option, far a shoes/springs if you bashing go with all aluminum shoes with all green springs, if you racing do 2 aluminum shoes with gold springs and 2 composite shoes with green springs. Good luck with the build and always have fun brotha!!!!
Thanks bro this is kit I’m looking at sounds like it comes with a 2 aluminum and 2 carbon shoes and variety of springs. Pretty sure it’s aluminum flywheel maybe losi changed up why the colors
The green springs are installed on the clutch, i have that clutch its the same one I have but the kit flywheel is a lighter color but still the same clutch
The lighten flywheel is the standard losi one that comes with all the kits, for bashing and street racing, I would go with all aluminum clutch shoes with either all green or all silver springs
Rc Fun thanks brotha, I make a compression collar out of brass pipe that will fit around the sleeve, then I put it in a bench lathe at my job, then I spin up the lathe slowly while tighten the jaws on too the compression collar. It’s hard to explain it in text
Where are you getting your pinchers for the sleeve? The ones i rarely see on ebay the seller is never on to sell. Sayd seller is away. Im trying to find one for .12,18,and 21 engine
Drew Grubbs well I pinch my sleeve at my job, they have a machine shop, I use a machine called a lath with a 3 point jaws. I looked at those pinchers on eBay but don’t know anyone that has used them.
@@rajaa111 ohhh ok bro. I actually have a buddy that could do the same for me. Yeah i havent heard ne thing about the ebay but have 4 or 5 engines in need. Got a os .12cvr thats an amazing engine but needs a pinch
@@rajaa111 i have almost 20 rides and many old retired engine. The os 12 cvr isnt made ne more so i gotta get it pinched. Amazing little engine. I do 5 gallons a month
I’m having a issue getting bearings for my 15 tooth bell.... the 13,14 tooth come with the same bearings but I’ve had to buy the bell again because my local store don’t carry them.
Kevin Caldwell really wow, that’s such a come bearing, i usually buy the losi ones and they come with one small bearing and one large bearing. I also got them on amazon too
Kevin Caldwell really wow, that’s such a come bearing, i usually buy the losi ones and they come with one small bearing and one large bearing. I also got them on amazon too
rajaa111 my local hobby shop didn’t carry the bearing... he had many but not the thick one... Tekno and Losi clutches are compatible... what is the size on that bearing so I can order them.... I bought a new bell just to get the bearings
rajaa111 Thank you! I will purchase them with my next order. I’m excited for my FX 5 DC that might be in the mail tomorrow.... again thanks for al your help!!
AUDY PEREZ vented lets the heat out, that’s all but it will also let dirt get in too, if racing I would use vented if I was bashing I would use a regular one
Josh Chatwin Nice!!! 👍🏾, well I like the novarossi 4 shoe buggy clutch. The shoes last forever and very easy to change. Far as pipes it depends if your racing or bashing? Bashing I would go with a 41001 header and either a 2096 or 9886 pipe, maybe a ofna 086 pipe. If you racing you could put a 41021 header with either a 9901 or 2096 pipe. There are some many choices it just depends on what you are doing. You don’t have to go with novarossi pipes or headers either
Thanks for the reply brother an just bash atm do want to get in to racing but hard here in the uk and hard to find an ofna 086 pipe these days bro and okay I’ll be buying the novarossi clutch an you have to use to clutch bell with what tooth should I buy I like top speed but also like acceleration
AUDY PEREZ its personal preference really, the tlr clutch is good I just don’t really like the pin cause they are soft, I prefer the novarossi buggy clutch the pins are strong and the shoes last forever. Reds racing clutch is basically the same as the nova clutch
You explain everything and give good advice! Excellent video keep them coming for us nitro brothers
Damn keep all this info coming because it is good shit. I like the way your channel is going because this type of nitro info you are not going to be able to pay for it, it takes someone with the passion for it to let the people know!
Elite Rc thanks brotha,
Elite Rc it is like a wealth of GOOD information!
Great 👍 video! Keep up the great job
BOTAJELL thanks brotha
Great video rajaa. Thanks for the info brotha. I have a question for you. What do you think about the novarossi karma engine. I would like to hear what you think. Thanks
The karma was similar to the keep off 4, it’s a .21 and great on the gas mileage if your using it to race. I never had one but I do have the Keep off 4 and that’s a great engine
rajaa111 I’m not a racer. Just getting into 1/8 scale nitro and looking into getting a buggy. Thanks 🙏 for the info. You are a bad ass racer
The reds racing quattro 34mm has to use only vent bell?
Bruva your videos are a great help for anyone trying to get into this Hobby, like myself. I wished you lived by me lol.
I have a question, I have a old rc touring car 1/10 3 speed Schumacher fusion 21, with a thunder tiger pro 21 r engine (with a 180 degree clutch 2 shoes) . Would I be able to upgrade to a 3 or 4 shoe clutch. Thanks for all your help and keep up the good work 👍🏾
I don’t think the clutch would be the problem I think the clutch bell would be, since it’s a 3 speed, I think they use a certain size clutch bell
@@rajaa111 thanks, much appreciated.
Good info here man getting ready for my Nova Rolling I’m going to need either a rebuild or new clutch. Looks like aMain has TLR prebuilt I may go with black flywheel different then my original blue they say better? Or I can just go with a rebuild kit seems cheaper to get whole new clutch and comes with flywheel if I do rebuild what shoe/ spring combo you recommend for Rolling .21 7 port in 8ight T 2.0 thanks bro
Well the black flywheel is steel, that would have the clutch spin up a little slower, it helps with wheel spin if you clutch has too much bite. Nothing wrong with the pre built clutch from losi its a great option, far a shoes/springs if you bashing go with all aluminum shoes with all green springs, if you racing do 2 aluminum shoes with gold springs and 2 composite shoes with green springs. Good luck with the build and always have fun brotha!!!!
Thanks bro this is kit I’m looking at sounds like it comes with a 2 aluminum and 2 carbon shoes and variety of springs. Pretty sure it’s aluminum flywheel maybe losi changed up why the colors
www.amainhobbies.com/team-losi-racing-prebuilt-aluminum-4-shoe-clutch-tlr9101/p211984
The green springs are installed on the clutch, i have that clutch its the same one I have but the kit flywheel is a lighter color but still the same clutch
part number light weight fly wheel
and what set up should I use for bashing street racing
The lighten flywheel is the standard losi one that comes with all the kits, for bashing and street racing, I would go with all aluminum clutch shoes with either all green or all silver springs
Nice video again brother 👍 what pincher do you use ?
Rc Fun thanks brotha, I make a compression collar out of brass pipe that will fit around the sleeve, then I put it in a bench lathe at my job, then I spin up the lathe slowly while tighten the jaws on too the compression collar. It’s hard to explain it in text
Grew up in a mechanic shop so I get the means of what your getting at
Rc Fun My man, I knew you would understand it, a lot of people wouldn’t have 👍👍
Where are you getting your pinchers for the sleeve? The ones i rarely see on ebay the seller is never on to sell. Sayd seller is away. Im trying to find one for .12,18,and 21 engine
Drew Grubbs well I pinch my sleeve at my job, they have a machine shop, I use a machine called a lath with a 3 point jaws. I looked at those pinchers on eBay but don’t know anyone that has used them.
@@rajaa111 ohhh ok bro. I actually have a buddy that could do the same for me. Yeah i havent heard ne thing about the ebay but have 4 or 5 engines in need. Got a os .12cvr thats an amazing engine but needs a pinch
Drew Grubbs man you must be going throw gallons 👍🏾👍🏾👍🏾👍🏾
@@rajaa111 i have almost 20 rides and many old retired engine. The os 12 cvr isnt made ne more so i gotta get it pinched. Amazing little engine. I do 5 gallons a month
I’m having a issue getting bearings for my 15 tooth bell.... the 13,14 tooth come with the same bearings but I’ve had to buy the bell again because my local store don’t carry them.
Kevin Caldwell really wow, that’s such a come bearing, i usually buy the losi ones and they come with one small bearing and one large bearing. I also got them on amazon too
Kevin Caldwell really wow, that’s such a come bearing, i usually buy the losi ones and they come with one small bearing and one large bearing. I also got them on amazon too
rajaa111 my local hobby shop didn’t carry the bearing... he had many but not the thick one... Tekno and Losi clutches are compatible... what is the size on that bearing so I can order them.... I bought a new bell just to get the bearings
www.amainhobbies.com/losi-clutch-bearing-set-5x13x4mm-5x10x4mm-losa6949/p8947
rajaa111 Thank you! I will purchase them with my next order. I’m excited for my FX 5 DC that might be in the mail tomorrow.... again thanks for al your help!!
The reds racing quattro 34mm will fit on my losi 8ight buggy rtr ?
I'm not sure i never used the reds clutch system
@@rajaa111 what the difference between vent bell or standard bell the vent bell get dust inside the shoes?
AUDY PEREZ vented lets the heat out, that’s all but it will also let dirt get in too, if racing I would use vented if I was bashing I would use a regular one
@@rajaa111 exactly soo I goin to use reds racing quattro clutch and they say I need to use vent clutch because I gone melt the clutch that true?
AUDY PEREZ I never melted one bit anything is possible
Just brought a novarossi p5xl for my buggy’s got a bargain bran new 70 uk pounds what would be the best clutch an pipe for it nitro brother
Josh Chatwin Nice!!! 👍🏾, well I like the novarossi 4 shoe buggy clutch. The shoes last forever and very easy to change. Far as pipes it depends if your racing or bashing? Bashing I would go with a 41001 header and either a 2096 or 9886 pipe, maybe a ofna 086 pipe. If you racing you could put a 41021 header with either a 9901 or 2096 pipe. There are some many choices it just depends on what you are doing. You don’t have to go with novarossi pipes or headers either
Thanks for the reply brother an just bash atm do want to get in to racing but hard here in the uk and hard to find an ofna 086 pipe these days bro and okay I’ll be buying the novarossi clutch an you have to use to clutch bell with what tooth should I buy I like top speed but also like acceleration
9886 n the 41001 it is for the pipe then
Can i use the same clutch on my buggy, truggy and savage?
Yes for the buggy and truggy but I'm not sure on the savage
Great videos!!
I need clutch for my losi 8ight I have novarrosi. 21 soo what clutch is good whit one is the best?
AUDY PEREZ its personal preference really, the tlr clutch is good I just don’t really like the pin cause they are soft, I prefer the novarossi buggy clutch the pins are strong and the shoes last forever. Reds racing clutch is basically the same as the nova clutch
@@rajaa111 ok I gone get the novarrosi
Raja now I have another problem I change 3 glow plug already why?
I run the buggy 2 minutes and blow the glow plug damm they cost $10 and I use turbo plug what happened what I doin wrong I am very frustrated ☹
I run 20% fuel on my novarrosi whit medium turbo plug and blowing my plug why?
good shit
Good info
Thanks