How We Rebuild Our Caterpillar Dozer Diesel Engine || Repairing CAT Dozer Engine in Local Workshop
Вставка
- Опубліковано 10 чер 2023
- How We Rebuild Our Caterpillar Dozer Diesel Engine || Repairing CAT Dozer Engine in Local Workshop
#rebuildingcaterpillardieselengine #catdieselenginerebuild #repairingcaterpillarengine - Авто та транспорт
The homemade bandaid on dude’s finger was just the icing on the cake!! Love these vids. And I bet that they hold together better than most people think??!!
Gotta hand it to them, they certainly make due with what’s available to them.
People talking about torque wrench and other big terms have never seen life beyond a company showroom or company workshop. They don’t know that many of these uneducated mechanics are far better than educated engineers. They think out of the box.
I am from India and we have a lot of road side mechanics and shops who do a far better job than big workshops , at a fraction of the cost and the end result is also fantastic. They are reliable and people go to them by choice.
That's very true
A lot of the factor is the fact that they have the desire and want to complete the job and get paid that counts a lot that they want to get it done and not make excuses
I wish I could put my rollaways in a shipping container and have it sent over there and partner up with these guys we make a ton of money
The secret to their success is using just the right amount of magic dirt in the rebuild.
احسنتم جميعا وشكرا والله يوفق الجميع لما يحبه ويرضاه سنة سعيدة أن شاء الله تبارك الله
Salut buat India ❤
Salam dari Indonesia.🇮🇩
These old Cat engines are really tough and easy to work on. They would often break the R/H motor mount bolt off. I repaired many of them over the years.
Based on the available resources (tools and equipment) I think they've done a great job. Not everyone has access to modern tools
If they don't have the proper tools , don't do the job . These foreign companies are a joke
@@budcunningham6732 Bin
@@GurpreetSingh-ck6dr9:58 98 j
У них есть опыт.
@@budcunningham6732 Ok so what are they supposed to do when something breaks down...sit around crying and praying to Santa Claus or the tooth ferry or God to suddenly send the correct tools and spare parts out of nowhere?....these are real men they just get on with the job with what little they have...respect!
Did anybody catch the bellhousing being installed without the washes behind the bolts and once again forget about a torque wrench it's good and tight
Yes I know,some of those big Cats have really complex torque sequences.Drag the heavy con rod over the cylinder liner without protection.
Lá a coisa é rústica e sem moagem... kkkkkk 😎 😎 😎
There will be a lot of criticism, but the bottom line is how well and how long does it run when their through, the reason they don’t use things is , they don’t have them. There’s way more to using a torque wrench than making it click or beep, most people on UA-cam don’t have a clue.
Actually if you 100 lbs on a 1ft lever you have ........100 lbs/ft torque. Its not complicated, they just have to find a guy the right weight to stand on a lever the right length.
I've been a mechanic years and can torque things up by feel within 1 to 2 ft lb everytime, old masters definitely don't need wot they ain't got
I’m not a mechanic but I think these guys did a great job. Working conditions in parts of India are horrible so I give this group a lot of credit for a huge job.
@@wazza33racer... kkkkkk 😎 😎 😎
@@johnmackey8508... Quer dizer que o cara tem grana para retificar um motor mas não tem para comprar um torquímetro de $ 200 ???... 😂😂😂
Beautifully done plenty of help done this hundreds of times out in the field
As have I. Torqueing the rods was always a miserable thing when the bugs were bad. Using a 4 to 1 multiplier by yourself is a tricky affair eh.
Ooopp.
Oopn in t a m a t a m c
Can not knock the guys credit due 👍👍🏴🇬🇧
50k for a new engine. Great job fellas
Interesting, everything tightened fully by brute force without a torque wrench in sight. Everything completed using basic hand tools.
300 foot pound on main bearing !!super precise with a pipe on wrench lol
Have the techs ever considered using a torque wrench ….they have grossly over torqued the rod bolts and have no real idea of the main big torque…I’m not trolling them as they are doing a decent job….but honestly after the labor and parts invested the proper torque is needed to insure your work is not in vain
😂😂😂
Они просто мартышки , какой им динамометрический ключ , они камнем жопы вытерают
That is the thinnest assembly lube I have ever seen!
Tools and equipments are behind but skill wise they are marvelous. Safety down. Smoking 😂 while working might burnt the whole workshop and no safety shoes 😮😢. But of all, with no sophicated tools, they still can do the job.
เป็น วีดีโอ ที่ยอดเยี่ยมมาก ❤❤😊
Nice videos good jobs
Lombok hadir bang proses perakitan alat berat
Job is very good but your safty is zoom how much Torque man birendra whiteout torque every Bolt and nut AL SO SAFTY FIREST
I have two huge rollaways full of beautiful tools I wish I could send it in a shipping container over there and go in business with these guys with some modern tools and get a nice huge workbench and heavy duty table to work on and get off the floor with 1 inch steel workbench
parabéns pelo ótimo trabalho que voçes fazem de boa qualidade.
Jura ???!!!... kkkkkk 😎 😎 😎
Adoro ver esses videos dos indianos trabalhando em motores. Nao usam torkimetro. Tudo manual e a coisa funciona. Prova que muitas vezes nao tem a necessidade exageradas de especialistas. Ja abrimos varios motores no sitio desse mesmo jeitinho deles uns 30 anos atras. E nenhum deles depois de realizado esse servico deu prego.
Melhor torquímetro é quando se escuta o rangido dos parafusos!😁😁😁
Gostaria de ter visto o teste do motor com carga máxima!
😂😂😂
Deben usar torquimetro , mucho más en un motor tan fino ,....con Cat , no compite ninguno...saludos
Mantap good
Los felicito, muy buenos trabajos. Excelentes videos, me encantan... Saludos desde Mendoza Argentina...!!! 🇦🇷🇦🇷🇦🇷
Anyone notice they used a thumbnail from pacific northwest hillbillys cat d4 build?
…these Guyz make do
and under the circumstance illustrate unique skills and tenacity
It is hugely fascinating
and immensely admirable
They show endless dedication and courage, and the Teamwork is inspirational beyond compare
GREAT STUFF‼️
👊🔥
🪖
It's not about the motor, it's about the views.
I’d love to see a dyno test on one of rebuilds.
Great START UP; all great work?
That's a lot of work!
I know that one old John deere engine main bearing torque in the John Deere manual said 250 FT LBS then turn 1/2 turn more. That always amazed me
Did I miss something or did that camshaft go in bone dry of any oil or lube?
Looked like they used some very thinned out ATF on the crank bearings. . Coulda been mistaken for Sriracha chili sauce too. I’m sure it was Cat approved so it will be ok. 😂😂😂
They used a very thin oil. I was surprised how little they used as well. No assembly lube I guess.
Dust will be better for them))
Calma, pessoal... ainda não encheram o cárter de óleo queimado... kkkkkk 😎 😎 😎
Looked like anal lube in the little red tube my guess
Cat D342 (spacer plate) engine, as someone else said, a lot to criticize, but needs must 👌🏻😎
brilliant Ali is that a three foot scafoliding tourque wrench or a two foot one you need
Amazing work 👍
You stole the video thumb nail from another UA-cam channel. He rebuilt his cat dozer in his basement garage underneath his large barn which is used for wedding party's.
QUEM SABE FAZ AO VIVO ISSO SIM É MECÂNICO PARABÉNS PELO SEU TRABALHO
รุ่นแรกของ cat หรือเปล่า
im amazed at what us people can achieve, these old Cats are phenomenal and these guys definitely know what they're doing
never saw an engine rebuild happen outside but I guess they get stuck into it before the elements have a chance to ruin the work put in
love this stuff
Torquímetro não existe nessa região do planeta... kkkkkk 😎 😎 😎
Estas personas son extraordinarias nadie ase eso pega ellos están acostumbrados aser estos trabajos los que critican su forma de trabajo anda alaar
Apapun jenis mesin lama serahkan over haul kepada mereka pasti kelar 😁👍🏼
Good enough and good and tight does not apply to critical tolerances can't believe these people take on these types of engine rebuilds they will never last
Washing a new rod bearing in extremely dirty solvent @ 26:29 doesn't exactly inspire the confidence this engine will have much longevity. Also the concept of ratchets and torque wrenches seem to have bypassed these people.
@@Chisos1 I agree they're lucky if it will last a day running if that but it said the amount of Labor it took to take the engine out and do this whole job in an unskilled way was pointless
Excelente trabajo,todos unos profesionales .
I'm not a master engine rebuilder but I've rebuild a good 50 to 75 and I'm pretty positive you are supposed to use even pressure when tightening main caps
Muy buen trabajo ❤
Good
Первый раз вижу, чтоб прокладки "Моментом" приклеивали :)
The negative comments on here need to be ignored. These are made by armchair mechanics.
The work these guys are doing here is just as good if not better than any European or US workshop standards.
This particular company have rebuilt hundreds of Cat engines without issue and have more experience than most.
If their work was sub standard their engines would have limited life or let go. They just don't. They rebuild these Cat motors to go on to do many thousands of hours further work without issue.
its done perfectly
Very good
Новые гильзы и старые поршни?
В рашке не так?
Ага! И коленвал болгаркой отшлифован!
Tudo apertado no "canometro", é o recurso que se tem, depois de uma certa experiência pra que torquímetro?
You can do with what you have available to do the job ! Like auto machinery if you don’t have it you must do with what you have the best way you can do !
Gostei e do torquímetro raiz que eles usam viu.....
Elbow click torque wrench...it works.
One has to wander what they do on a windy day or after an unexpected strong gust of wind?
a little dirt or dust will hurt
They don't Wander about anything on a Windy Day! 🤣
Peu importe la critique ils sont courageux ils font ce qu'ils peuvent avec les moyens du bureau ce ne sont pas des fainéants
might wanna install new cam bearing after the "new cam bearing" lol.
I've learned that torque wrenches are superfluous.😀
Для этого есть опыт😂
ماشاء الله تبارك الرحمن
All torqued to the “hard as I can push/pull” spec.
Those headbolt threads needed a permatext sealant & light oil between headbolt cap & hardened washers and (torque specs?) Ever heard of thm guys...
Good job 💯👍
G'Day
Is thet a cat D353 if so I use to work with 4 D379s on a sand dredge in Lakes entrance vic Australia they are the best engine that I have worked with all my life PS I am a marine engineer retired.
Cheers Rory
LO MEJOR EL CONTROL DEL PAR DE APRIETE DE LOS TORNILLOS
I was wondering about how they torque them . I wonder if anything they rebuild Flys apart. Just a thought
😁look just the next comment...
My friend how long is warranty? I’m very happy for you too ask my friend. Warranty is the best for you. For you my friend we do warranty until it is loaded on the truck my friend!
Very good. Manual work. No tork key. Beast level.
Excelentes videos para no morir del todo imnorante
De que país son ??
👏👏👏 ottimo lavoro 👏👏👏.... 👉💥💣🚀🔝💫💪👍
O bicho é muito bruto 😅
back street mcanicers fred dibnah would have respected those men
Me gusta la reparación de motores
Sealant, more sealant, more tube torque wrench end more sealant😅
Nothing like overtorquing rod bearings to wipe them out prematurely
One has to wonder I could spin the crankshaft so it's okay so the bearing clearances a fine yeah right no plastic gauge how do you know what the tolerances are to float the bearing looks like they're going to be building this again
And remember it still has to go in the machine that it goes to
Ácuantas libras apretan los tornillos de la culatas gracias
Não usam torquímetro para o torque de aperto dos parafusos dos mancais do virabrequim, capas de bielas e nem principalmente nos cabeçotes. Nunca vi usar cola na junta do cabeçote.
bonjour à tous, ils sont très courageux mais travail dans des conditions déplorable ,
ils connaissent le marteau
mais pas la clé dynamométrique , ils pourraient avoir une déboulonneuse à air comprimé plus facile pour le travail avec moins de peine
par contre aucun sécurité
chaussures , gants etc etc.....
bon courage !
Very very good🎉🎉🎉🎉🎉
سلام دوست خه وخت ولرئ.. راځي چې دیوبل دچينل ويډيوګانې وګورو دیوبل سره مرسته وکړو ترڅو مخکې لاړ شوو ❤❤❤
Putting oil on threads for a better torque on nutts and studs
Aí manja
you want to keep it nice and clean inside that engine , don't use any messy engine building pre lube in there. that cam shaft, lifters, valve train parts don't need pre lube.
Actually, they may have lubed them when installing the lifters.
Slap-On torque wrench.
Essas são as condições deles trabalhar,o que não podia ter aí era os caras trabalhando com uma Esmerilhadeira enquanto eles montavam o motor,contamina demais
Why not paint the engine to prevent rust and make it look better? It would make the customer feel better about the job and get more future business.
Gotta buy the paint from Caterpillar, Pakistani mechanics don't like monopoly traders
Do you have twin disc 8501 series gearbox for sale?Both old and broken ones are find!
La verdad son grandes mecanicos ,...es un motor muy caro , cilindros de cobalto
Well I don't know how long this thing is going to last, but there is no doubt at all that all them big ends and headbolts are painfully going to be all rattling loose and then they'll be back on square one again. Anyone ever heard of a Torque wrench, Angle tightening specifications? A technician or workshop engineer from caterpillar would love to see this, NOOOOT!
😂😂😂
they re not engineer only high school graduate
but usually those repairs last for a long time.. i know they should used a Torque wrench. but those guys have tighten those same type of bolt from like age 10-12. they know how tight they should be by feel. and most of the time. i mean most of the time they work great.
What to do we brown people are so stupid
Another armchair expert adds his two cents worth!!
Isso sim é macanica de verdade 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
How much engine labour charge ?
35:12 to 35:17 liners with different high
How many hours will an engine like this last? Seriously? Do they guarantee a minimum number of hours?
I can't watch this I will loose sleep over it.
😂😂😂
La dinamometrica nel polso hahaha BRAVI
Tenéis que utilizar llave dinamométrica