This channel is such an easy watch. Benny clearly knows his stuff and would be easy for him to just chuck some stuff together. The content comes from the camera man asking all the questions as the process goes along weather the question is stupid or not. Benny answers and explains everything perfectly and in layman's terms so everyone can understand. Great job fellas. Loving the content
Amen… I much prefer this to when Gian was a silent partner, even though it was still informative then. Now they’ve gone and added entertainment. Information+entertainment = infotainment? 🤔
The Full Boost boys have built a workshop that they are renting out. They have some pretty major sponsors and they've only just started out, but I guess we'll see.
Yep we call those the hydraulic clutch release bearing. The Throw out bearing is non Hydro here in the USA. Well at least it was called that back in the day when I was wrenching on stuff. 70`s 80`s 90`s .And that is the Ring gear with the teeth. That engages with the starter motor to turn the Engine over.
That electric ratchet should have a 'max force torque' so you can't break big bolts off but gives you an idea of how much you can push on it, my el cheapo toolpro one I put through hell at the mine site I work at and has lasted a few years before I melted the ratcheting mechanism not lubing it haha
I see the thumbnail and think Oooh button clutch....opps and then I hear 'cause reasons' and everythngs alright again... thanks for your awesome commentary Benny😂😂
I did your maths on that idea at 10:25. Just using your guestimates for insurance and such those hoists would have to be rented a solid 5 days a week at 200+ a day just to break even.
Wednesday, bcw and payday what a world we live in now i can go get a packet of winnie blues and a full tank of 98 and get to watch this while driving in my bmw not using my indicators
Knock the plug off the reverse switch with a little flat blade, it is a twin pin plug. Then you can just use a socket to remove the switch without cutting bits off your box.
Gian always asks great questions for us bozos with limited knowledge. Appreciate ya G! And Benny, appreciate you for always explaining clearly. Love these vids
Red light green light referance understood 😂 gonna go listen to that next 😂😂 ... and im amazed those flywheel bolts lasted so long especially with all the clutch "testung"
10:52 ive been to one in new zealand it was $40 an hour for doing it yourself but they have to lift the cars up and down for you and then there is half greasy which would be assistant from the staff an thats $60
Did you have an old english car you were going to do something with too? We've not seen the is600 all year and then this Falcon turned up so i could see that happening with the is600 going away.
This channel is such an easy watch. Benny clearly knows his stuff and would be easy for him to just chuck some stuff together. The content comes from the camera man asking all the questions as the process goes along weather the question is stupid or not. Benny answers and explains everything perfectly and in layman's terms so everyone can understand. Great job fellas. Loving the content
@@MrOddman85 thanks mate :)
I have to agree with this statement
Amen… I much prefer this to when Gian was a silent partner, even though it was still informative then. Now they’ve gone and added entertainment. Information+entertainment = infotainment? 🤔
@@J27M infotainment.
This is like an AI generated comment from TEMU.
I genuinely like the Gian/Benny interaction. Keep up the great work fellas.
Gian is asking the questions that i would want to ask, which i really like that Gian asks questions.
Clutch dump your ratchet. Love you guys 😊
Much love and blessings to all ❤
Stay safe and be kind 🙏
"I'm not having an aneurysm, I'm finding a die nut" 😂😂
After seeing some of the posts on various b series facebook pages, I am not surprised with those flywheel bolts.
i look like a snapper 🤣 im not having an anueryism im looking for a die nut 🤣 absolute gold
The Full Boost boys have built a workshop that they are renting out. They have some pretty major sponsors and they've only just started out, but I guess we'll see.
@@lodestone69 yeah their model is s bit different and it involves a car club from memory,
36:25 "Look at me, I'm the starter motor now."
🤣
We Got the Chocolates is a great shout ... their stuff is usually funny as hell.
Cool drum skin chat ! Genuinely was just looking at new drum skins while watching this !! 😂 You guys are great keep up the awesome work 👌
More dad jokes. Haha ya doing great guys love the vids, been watching for a couple years now
10:44 In 1988 at The Muffler Man in Prahran, the owner told me it cost him $14 to lift a hoist.
Been loving all of the Falcon episodes Benny! Love seeing the work that you're doing with it! Keep up the great work and banter guys!
Yep we call those the hydraulic clutch release bearing. The Throw out bearing is non Hydro here in the USA. Well at least it was called that back in the day when I was wrenching on stuff. 70`s 80`s 90`s .And that is the Ring gear with the teeth. That engages with the starter motor to turn the Engine over.
That electric ratchet should have a 'max force torque' so you can't break big bolts off but gives you an idea of how much you can push on it, my el cheapo toolpro one I put through hell at the mine site I work at and has lasted a few years before I melted the ratcheting mechanism not lubing it haha
Good job Benny Fixing up the Falcon it looks amazing 👏👏👏👏
my dad was a mechanic, and he always said if you can reach it, you can do it. if you can see it too, that's just a bonus.
Who among us haven't said "I can see it or I can touch it but not both"
diy garage in Perth been going for a while now
Benny for the win. I love your work guys :)
Great epidsode boys. And the nick namers are jay and dunc from the rock radio station.
Great Ep. Appreciate the explanation's along the way.
I see the thumbnail and think Oooh button clutch....opps and then I hear 'cause reasons' and everythngs alright again... thanks for your awesome commentary Benny😂😂
Benny's (man bat) custom works🤟
53:11 looks like Bennys standing on the drip tray 😂
I did your maths on that idea at 10:25. Just using your guestimates for insurance and such those hoists would have to be rented a solid 5 days a week at 200+ a day just to break even.
@@cjm5002 yeah mate. Slippery slope.
Long format FTW
A definant P plater special without a doubt. Lucky you came along to save it, Benny. Some people shouldn't work on cars.
really liking the format
ITS WEDNESDAY MY DUDES
ITS TUESDAY IN THE USA. EVERY OTHER COUNTRY DOESNT EXIST
@ that’s your fault for being a day behind. Catch up 😂
Wednesday, bcw and payday what a world we live in now i can go get a packet of winnie blues and a full tank of 98 and get to watch this while driving in my bmw not using my indicators
@@tcolloganHELL YEAH BRUTHA
@@HL-hw6qp hell yeah brother, pays spent now waiting for next Wednesdays pay to fix a coolant leak with the beamer
Knock the plug off the reverse switch with a little flat blade, it is a twin pin plug. Then you can just use a socket to remove the switch without cutting bits off your box.
I did the exact same thing after learning this after the fact
@@bencarthew3106 that’s very good info. Thanks.
Send it like Aus post and leave it a total different door in a different street and in a different suburb
@@caynnfittler1628 send it like Aramex and just sit on it for 10 days….. it’s not an egg Aramex……
I feel lucky to have a transmission in my car where all I have to do is fill it up until it starts to drip.
Blue Seude Shoe Benny!
Gian always asks great questions for us bozos with limited knowledge. Appreciate ya G! And Benny, appreciate you for always explaining clearly. Love these vids
Red light green light referance understood 😂 gonna go listen to that next 😂😂 ... and im amazed those flywheel bolts lasted so long especially with all the clutch "testung"
10:52 ive been to one in new zealand it was $40 an hour for doing it yourself but they have to lift the cars up and down for you and then there is half greasy which would be assistant from the staff an thats $60
FAVOURITE CHANNEL EVER
When Benny's not listening to Dr Karl, he's listening to Duke Dumont!
Hi.. what was the drive shaft in the end...custom or did the Au one work , for bfxr6/ v8 diff ?
@@blairread4414 yeah just went custom as the diff yoke we used was considerably longer than the one Bill used.
I don’t know how to spell his name but when’s the camera guy gonna do his diff bushes?? 😂
@@beaujenkins2739 funny you mention that…. Let’s say they’ve been done….
By me….. ( ep next week)
TIL neutral bomb, noice, we called them D slammers! Always good to hear other automotive colloquialisms.
Cheers always a good watch!
Will it be a no no to use helicoils or similar to repair the threads?
It could be done for sure.
I bought the little ryobi too and have come to terms that it is only good for a 10mm or smaller.
Did you have an old english car you were going to do something with too? We've not seen the is600 all year and then this Falcon turned up so i could see that happening with the is600 going away.
Had some issues with the LS that have taken longer to rectify than I’d originally hoped.
Red light, green light, now you know!!
Wait....
the only red light green light i knew was limp bizkit. can i atleast get a half star for that?
Any fizzy drink is acidic. Carbonic Acid. Because.... Chemistry lol
Hey Benny what’s the crank dowel kit your using, recommend guess it does flywheel or flex plate?
"How do I still have legs?" - Benny 2024
Get a UniClutch ! Even Exedy's double devil still isn't as tough as the Sport. And the pedal feel is like OE !
@@18Bogeysgolfer we’ve had great results with xtreme so sticking with them at this stage
Let's get that clutch out !
Benny put that oil through a stocking and give it to a mate , or i will have it , synthetic by the colour Yeee . Good times men
Canberran here. Let me tell you why I work on my own car instead of giving it to someone else to fix.
You’d be shocked to know I bought this from a mechanic.
@BennysCustomWorks FFS
49:15 this is the signs of his down fall 😂😂😂
Plop plop. I’m crapping to this 🎉
how come you didnt go with a UNIclutch so you didn't get twin plate rattle ?
Had good results with xtreme, nothing wrong with a twin plate rattle :D
@BennysCustomWorks haha haha fair enough then I hope we won't see you getting the shits of the rattle over time 🤣😂😁
Benngi
naw for some reason i'm disappointed to not hear the words 'pressure plate'
Manbat 😂😂
Yewww
you havent seen my falcon
nastyyyyy
You are not alone when it comes to ratchet straps and tramplines.
Long format winners more like.
Don't look up who's running Bestom Works
Yessssss letsss goooo FORD FUCKING POWDER YEAH BUDDA 12121212 YEAH BUDDA ❤