Timing belt replacment and water pump on a nissan 3.0 3.3 frontier pickup xterra 90-2007

Поділитися
Вставка
  • Опубліковано 7 жов 2024
  • I'm going to show you how to replace your timeing belt and waterpump on a nissan frontier, xterra, pickup from 90 91 92 93 94 95 96 97 98 99 2000 2001 2002 2003 2004 2005 2006 2007
    i am not liable for anything that happens or occurs while you are working on your vehicle, this video is only for a entertainment , and you may need more information to properly do the work. I am not liable for any injuries or death due to your work on your done at your own risk

КОМЕНТАРІ • 21

  • @tspoon1968
    @tspoon1968 4 роки тому +4

    Thanks brother..you made it look easy..IM DIVING IN IT NOW..

    • @fixergood
      @fixergood  4 роки тому +1

      Thanks for watchin besure to like and subscribe for more tips and tricks

    • @tspoon1968
      @tspoon1968 4 роки тому

      IM having problems..could you answer a few questions for me..
      850.525.2453 Tom

  • @raiderman28
    @raiderman28 2 роки тому +2

    I am dreading this job. You made it seem like a piece of cake. I always worry when it comes to timing belts. if you do them wrong, you can damage the engine. if you would have shown a bit more in depth, I would feel little more at ease to try. I have done many hard jobs, I dot know why this crap scares me.

  • @michaelgarcia9362
    @michaelgarcia9362 2 роки тому +1

    Thanks so much

  • @rodolforomero6732
    @rodolforomero6732 4 роки тому +1

    damn that’s a lot of work bro

    • @fixergood
      @fixergood  4 роки тому +1

      Thanks for watchin really apreciate it

  • @enriqueromero4475
    @enriqueromero4475 3 роки тому +1

    Nice bro

    • @fixergood
      @fixergood  3 роки тому +1

      Thanks for watchin really apreciate it. Besure to like and subscribe for more tips and tricks.

  • @RIP20201
    @RIP20201 4 роки тому +4

    Do you need to remove the timing for the water pump?

    • @fixergood
      @fixergood  4 роки тому +3

      I'm not sure , there might be a idler that mounts to the pump houseing. If bnb ut were me and I was already tha deep in i would replace the pump. Thanks for watchin besure to like and subscribe for more helpful tips and tricks.

    • @RIP20201
      @RIP20201 4 роки тому +2

      fixer good a8

    • @jeffhamilton2694
      @jeffhamilton2694 4 роки тому +2

      How long did it take you

  • @TopShotta713
    @TopShotta713 4 роки тому +1

    I need to replace the part that the thermostat sits inside of (with the 90 degree hose). Does the intake manifold have to come out? i see the two bolts are long so i don’t know if it’ll hit when trying to take them off. TIA

    • @fixergood
      @fixergood  4 роки тому +1

      I'm not sure I've never replace that pipe before ,why are you replacing the housing is it leaking?

  • @VladimirTheLeadHead
    @VladimirTheLeadHead 2 роки тому

    Jesus Christ I just got an 06” from a friend of mind that Is wrecked in the front. I removed the radiator and AC condenser and I’m about to pull the wreck straight but I think I should go ahead and put a water pump and timing belt in it while I’ve got the access.

  • @Tom-dt5nv
    @Tom-dt5nv 3 роки тому

    95 Nissan Frontier XE 3.0 XE RWD timing belt or chain ?

  • @RIP20201
    @RIP20201 4 роки тому +1

    When you say pop the starter you crank it?

    • @marcosortiz3665
      @marcosortiz3665 4 роки тому

      My exact question

    • @castledomeknives9395
      @castledomeknives9395 3 роки тому +1

      You *crank/ turn engine over* ever so SLIGHTLY...A MILLISECOND...it should loosen the crank bolt....o GOOD STRONG battery Impact will do it too...I use the Ridgid r86211...monster impact