Great simple video and straight to the point. Just bought my first jigsaw and this gave the essentials of getting the tool set up. Now to watch a few videos on using it and then a deep breath and time to cut into the timber!!!
Thanks so much for this video! My dad is a carpenter and introduced me to a jig saw for the first time and I was amazed! I thought you had to use a table saw to cut through wood. I am so happy that it turns out I can just use a small device for my projects! The video was very straight forward without a lot of stuff i don't nee to know.
Loved your how to video. Didn't know how to replace the blade, others went to fast to understand. Your pace was great and i changed my blade..thank you
Thank you so much! I assembled my jig and was nervous that the piece parallel to the surface isn't at a 90 deg angle to the blade. Turns out, it doesn't have to be. Thanks again!
Very short and sweet video packed with helpful info. You solved my problem of getting the back of the blade to rest against the guide wheel. I didn't know the whole assembly moves forward. Users manual didn't tell me that, but you did. Thank you!
Thank You. I'm a female trying to use a Jig Saw for the first time. Your video was the 8th one I watched. The previous 7 didn't explain how to adjust the wheel.
Thank you. Your's was the only video i found for an older jigsaw that uses two screws to hold the blade. (Newer jigsaws don't need tools.) It's easy to incorrectly install the blade so its leaning to one side, but I think I finally got it.
👍👍👍👍👍👍 One small correction on your angle adjustment. The angle is adjustable up to 45° and usually has marks. Good job & very informative for beginners!
Thank you for the video!!! It was very informative (laymen’s terms 🤙🏻). I haven’t worked with a jigsaw in years (like 20+ 😳 this video gave me some good pointers and insights to help me with my project at hand)
THANKS, I JUST FOUND A JIGSAW AT A GOODWILL FOR A VERY CHEAP PRICE BUT IVE NEVER USED A POWER TOOL .LOOKS LIKE IM MISSING THE BLADES THOUGH BUT GREAT BASIC INFO FOR SOMEONE THAT DOESNT KNOW ANYTHING ABOUT POWER TOOLS.
I have a Skil 4490 Jig Saw and next to my 75 mm Howitzer it’s the most dangerous tool in my garage. (I really don’t have a Howitzer.) The geniuses in the Skil design department made the off/on switch more than half the size of the handle so it’s hard to pick up the saw without inadvertently turning it on. I noticed that the saw featured in this video has the same problem. Notice when the demonstrator is holding the saw by the handle, his fingers are on the trigger. My saw is equipped with all the bells and whistles that Skil could load on a Jig Saw and had they installed a one finger sized trigger it would be great. However, their trigger is 3-4 fingers long and is a real danger. Anyone want to by a Jig Saw cheap? It has very low mileage.
How to cut a V at the end of a piece of wood so it comes to a point I’m making a dragonflies so I’m using stakes for the body 😊any help would be great thank you 😊
i know this is an old video, but i'm going to ask: is there a reason why the blade bends so quickly? i've looked and there's no blade calibration feature on my jigsaw. i wonder if it's the blade roller guide. is this a possibility?
I have the rigid compact jigsaw. I was hoping to take down a few 2x4's cuz i'm removing a small partition wall. Could this work or should I buy a reciprocal saw? This jigsaw looks strong so I was hoping it might work
Podrías sacar un video con subtitulo en español, no encuentro ningun video que explique como tu lo haces💗💗💗. Me complica el protector que trae y veo que usas una llave, Ojalá la aprenda a usar. Leere bien el catálogo.
i noticed that your jigsaw use's an allan key system, but you used the T-bar blade.? and not a C-cut blade,.? dose this mean that the older jigsaw can take both blades.or is there a danger involved in not using the right one.?
I have am older SKIL/Brand Jig saw, while watching your video, mine doesn't have any place to put a tool or the blade. I'm not sure but is mine probably a Plaine jig saw, that you can't make any changes on. I guess I need an up to date one. But what I was looking for was how to Oil an old Jig Saw. Where do I put the oil??? Please help.
Thank you for being succinct and direct with no extra talking, background music, etc.
Thanks help a lot..
Mon Dieu, where have you been all my life of DIY disasters??? THANK YOU. so clear....
The only video I found which mentions the roller - best video on a jigsaw use, by far! Thank you!
Great simple video and straight to the point. Just bought my first jigsaw and this gave the essentials of getting the tool set up. Now to watch a few videos on using it and then a deep breath and time to cut into the timber!!!
THANKS! I viewed several other videos before I found yours. Your video was by far the most helpful :)
Thanks so much for this video! My dad is a carpenter and introduced me to a jig saw for the first time and I was amazed! I thought you had to use a table saw to cut through wood. I am so happy that it turns out I can just use a small device for my projects! The video was very straight forward without a lot of stuff i don't nee to know.
Super helpful tips! I was completely blank until I watched your video. Great job!
Very good delivery. He speaks well and makes it seem easy!
Straight to the point with 100% useful information. Thank you!
Thanks, best video! Short video , lots of information, straight on the subject . Keep going like this !
Loved your how to video. Didn't know how to replace the blade, others went to fast to understand. Your pace was great and i changed my blade..thank you
Really good how-to. Helped me figure out how the heck to use and change the blade on this thing. THANKS A TON!!!
Thank you so much! I assembled my jig and was nervous that the piece parallel to the surface isn't at a 90 deg angle to the blade. Turns out, it doesn't have to be. Thanks again!
Very short and sweet video packed with helpful info. You solved my problem of getting the back of the blade to rest against the guide wheel. I didn't know the whole assembly moves forward. Users manual didn't tell me that, but you did. Thank you!
Thank You. I'm a female trying to use a Jig Saw for the first time. Your video was the 8th one I watched. The previous 7 didn't explain how to adjust the wheel.
K. Applegate not all jigsaws have the wheel!
Thank you. Your's was the only video i found for an older jigsaw that uses two screws to hold the blade. (Newer jigsaws don't need tools.) It's easy to incorrectly install the blade so its leaning to one side, but I think I finally got it.
Thank you. Love the way you explain things very clearly
thank you. this is a good guide. i need to stop watching these types of videos and actually start using my jigsaw!
Good simple informative presentation, thanks a lot
Refreshingly lucid and concise. Well produced video,
excellent info and solved several problems from watching your excellent video.
Thank you Thank you
Great video, quick and to the point w/o a lot of fluff, thanks.
Thank-you for the very commonsense instruction! well done. Paul
*”thanks friend!” - MELL DUNEY 616*
Thanks. A really good video for someone just starting out with a jigsaw.
This must be my most underused tool, which is a bit daft as it’s so versatile. I might use it more if I bought some blades facing the opposite way.
This is what im looking for, Thank you mate.
Excellent introductory video, big thanks
Wow. What a concise and helpful video. Very impressed. Thank you.
Just what I needed to know. Thank you for making this. Subscribed.
👍👍👍👍👍👍
One small correction on your angle adjustment. The angle is adjustable up to 45° and usually has marks. Good job & very informative for beginners!
Very informative & answers all questions about your tool. Thanks! 😎
Thank you for the video!!! It was very informative (laymen’s terms 🤙🏻). I haven’t worked with a jigsaw in years (like 20+ 😳 this video gave me some good pointers and insights to help me with my project at hand)
thank you very much well explained I learned a lot
Thanks exactly what I was looking for 👍
best video i found . you are great at this. thanks for your help.
THANKS, I JUST FOUND A JIGSAW AT A GOODWILL FOR A VERY CHEAP PRICE BUT IVE NEVER USED A POWER TOOL .LOOKS LIKE IM MISSING THE BLADES THOUGH BUT GREAT BASIC INFO FOR SOMEONE THAT DOESNT KNOW ANYTHING ABOUT POWER TOOLS.
This helped me today.Thanks!!😊
Thank you. Very straight forward and helpful information.
Great video. Simple and concise. Thank you.
Watching this confirmed my initial thought that my ancient handy down craftsman jigsaw was broken and I'm due for another one.
Excellent...straight to the point video...well done & thanks.
Nice and simple. Thanks bro 👍
Great Video! I had no idea a jig saw could do all that. :)
Great video! Simple, clear and to the point! 👍🏻💯
5STARS ⭐⭐⭐⭐⭐
trank you so clear the insctruccions for me; gracias las instruciones muy claras para mi :)
Found what I needed to Know. Thank you so much
Good info for me as a beginner.. Thanksalot
Such a good informative video thank you boss
Excellent - Just had a newbies Jigsaw user set up in 5 mins - Cheers!!! 5*****
This video was very helpful. Thanks!
thanks. very helpful. can I use a jig saw to create designs in rubber tires?
I have a Skil 4490 Jig Saw and next to my 75 mm Howitzer it’s the most dangerous tool in my garage. (I really don’t have a Howitzer.)
The geniuses in the Skil design department made the off/on switch more than half the size of the handle so it’s hard to pick up the saw without inadvertently turning it on.
I noticed that the saw featured in this video has the same problem. Notice when the demonstrator is holding the saw by the handle, his fingers are on the trigger.
My saw is equipped with all the bells and whistles that Skil could load on a Jig Saw and had they installed a one finger sized trigger it would be great. However, their trigger is 3-4 fingers long and is a real danger.
Anyone want to by a Jig Saw cheap? It has very low mileage.
Good job
Thanks bud!
Very Helpful
Thanks Yukon Cornelius! ⛏
this is informative thanks! I don't have the space or the need for a circular saw, would a jigsaw be good enough to cut plywood?
Sure would but a circ saw wouldn’t take up any more space than a jigsaw 🤷🏻♂️
Very helpful, thanks a lot
Great job and nice info thank you
Can I adjust the length of the blade ?
I trying to make a small groove in the middle of the plywood board.
Thanks, this was very helpful and gave me the confidence to get on and do my project :-)
very helpful tip. thanks a lot man......
Very Helpful!! Thank you!!
Great video mate, very clear and informative.
thank you for this video what brand jig saw is this
How to cut a V at the end of a piece of wood so it comes to a point I’m making a dragonflies so I’m using stakes for the body 😊any help would be great thank you 😊
Thank you.
Good important tips... Thank you!
Thanks for the tips Action Bronson :-)
Many thanks for tis video, it is great.
i know this is an old video, but i'm going to ask: is there a reason why the blade bends so quickly? i've looked and there's no blade calibration feature on my jigsaw. i wonder if it's the blade roller guide. is this a possibility?
Thank you Buddy 👍🏼
Really helpful 👍
THANK YOU!
I have a stripped screw where the blade fits in Nothing will free it. What can be done? It has no key hole , just a screw
I took off the bottom and it appears to be metal blocking the second hole? I cant screw it back in :(
Your video was very helpful, thank you!
I have the rigid compact jigsaw. I was hoping to take down a few 2x4's cuz i'm removing a small partition wall. Could this work or should I buy a reciprocal saw? This jigsaw looks strong so I was hoping it might work
What size Allen bolt used for tightening?
Thanks, nice and clean!
awesome video! very helpful, thank you :)
Thanks for the helpful tips!
Podrías sacar un video con subtitulo en español, no encuentro ningun video que explique como tu lo haces💗💗💗. Me complica el protector que trae y veo que usas una llave, Ojalá la aprenda a usar. Leere bien el catálogo.
Thank you 🙏🏻
My blade is twisted can you adjust it in the saw...it's not the blade it's when I insert it it's turned
Can you use a hacksaw blade on a jigsaw. Are they the same or different
Good Info.Thanks !
good work
Can i buy lock screws of the blade? Or if its available in the market
How to fix lose thread screw where the blade is inserted
the blades type" t" or "u" can i use?for jig saw hyper tough 400
or both? (sorry, i don't speak english!)
Thanks
The model I have does not have mounting screws
Thanks 😊
Thanks man
The jigsaw you were using...was it a appolo jigsaw?.....looks very similar to what i had bought me an ive never used one before in any way. Great vid
Great tips thanks!
i noticed that your jigsaw use's an allan key system, but you used the T-bar blade.?
and not a C-cut blade,.? dose this mean that the older jigsaw can take both blades.or is there a danger involved in not using the right one.?
I also noticed that. So you can use t-shank blade?
This is the big question no can answer...Im about to find out!
I have am older SKIL/Brand Jig saw, while watching your video, mine doesn't have any place to put a tool or the blade. I'm not sure but is mine probably a Plaine jig saw, that you can't make any changes on. I guess I need an up to date one. But what I was looking for was how to Oil an old Jig Saw. Where do I put the oil??? Please help.
Awesome!
Thank you♡