Very nice! I would not seal this 18650 battery inside. I would use a 18650 battery holder and carve a opening to remove the battery when in need of replace. (for the case of failure or starting the boombox with a full cell)
Making a batteryholder on you speaker might be hard because of the space inside, the air pressure will be weak because of air leaks, s i suggeat start the setup firts before fully sealing it
Take an old 5 rupees E jel pen and take out it's refill and you will find there is a rubber on the cap and take out that rubber with the pen refill and stick On bottom of the speaker Now it will not move here and there
Good job but the box for those speakers is poorly sized, it cannot move with vibrations. Those mini sub woofers require a heavier, more robust enclosure.
I loved all your video bro, but in the end to get so much bass from this small speaker is really extraordinary. Thanks a lot for sharing & have a great Sunday!
Very nice build indeed! I guess that if you leave it turned on running on battery, it will run out eventually? Can it be made so that instead of a switch on/off button, the unit tuens off itself after a while if its not being used?
That depends on the amplifier/bluetooth module, some have that function and others don't. You could also make a circuit or maybe there is a module for that, but for this project I don't see much point in making it more complex.
@@hasib1s The output from the step up is max 2 amps, it all depends on the battery. Of course you can use a 3.7volt battery but you have to use a capacity above 2amphere
Are you using a battery, if so, check your battery, make sure it's above 2amp so that the volume can be maximized. or maybe this amplifier is not recommended for 2ohm speakers, I have never tried it on this amplifier
👋Hi!, i have question. •can i adjust the sound through the phone? •and can i add 2 more batteries like that? just asking because i'm interested of making one 😌👍 waiting for your reply. Thanks!!
Yes.. this can be adjusted via headphones... You can use more than 1 battery ,, this module is recommended to use at least 2 batteries ,.. the more batteries the longer the use, with a note that this module only supports 3-5 volts, so you have to make a parallel connection if you want to use a lot of batteries .. Thanks for the question
Is the 18650 a Samsung 30Q(3000 mah)or 35E(3500 mah)...? I'm not a bass head...(backup singers in a LEAD singer's song need MORE volume...not going to hold 'em back. I'll have to get some of these items from SOMEWHERE else...& NOT Amazon.) I'll have to get a POWERFUL wood glue to start this...
You messed up at the end with the radiator driver by putting it on the wrong way. Then you made it worse by cutting the centre out and glued it the other way round. Instead of just turning the whole thing around. Bad build as my opinion. You should have made a partial between the speakers also as it will interfere with eachother. Dispite having a radiator driver. You would be missing a lot of clarity and separation. Mid high cancelling between each other. Or as some say muddy midrange. And distortion in the bass at high levels. Try using MDF wood. For better resonance
Hi I'm Amit and I'm from India
Hi youuuu🙌🙌
@@leoparddiy 🙂🙂
Hello bro
Amit amit 🤭
@@mvdrix902 wkkk
Very nice!
I would not seal this 18650 battery inside. I would use a 18650 battery holder and carve a opening to remove the battery when in need of replace. (for the case of failure or starting the boombox with a full cell)
Making a batteryholder on you speaker might be hard because of the space inside, the air pressure will be weak because of air leaks, s i suggeat start the setup firts before fully sealing it
Уауккккк@@jeussmyrrho9119
Gret 👌bro..
I have to try this when I have the time :D
Truly an excellent result.You could maybe put little rubber feet on each corner on the bottom, to stop it sliding around?
Take an old 5 rupees E jel pen and take out it's refill and you will find there is a rubber on the cap and take out that rubber with the pen refill and stick
On bottom of the speaker
Now it will not move here and there
Very smart job. 👍 Bravo. I like this box bluetooth
It would help if you slowed it down so people can follow it better looks fun to make though
you can click the gear icon and slow the video down
So beautiful & Amazing
Enak kali suasana rumah nya ya
🙌✨
9:51 my leds only have 4 legs and not 6 like yours, described as D1, 5V, GND, and D0, can I use that too? Regards
what type of leds are you using?
Which spray do you spray on speaker box please tell me
Please bro🙏
Nunu spray
Good job but the box for those speakers is poorly sized, it cannot move with vibrations. Those mini sub woofers require a heavier, more robust enclosure.
New subscriber, great job!
Thks bro🙌🙌
I loved all your video bro, but in the end to get so much bass from this small speaker is really extraordinary. Thanks a lot for sharing & have a great Sunday!
keren brader.. 🤘🏻
Trmksih bng
RESPECT 1000000000% ❤❤❤❤❤❤
great job
Thnks bro 🙌
its awesome ..... 😃👍🙏
🙌
Next🤗🤠 level
It turned out nice.
Hi, am from rasia
Rasia (Russia)😂😂
Hii
8:21 background 😮😮😮
Parabéns caixinha fico top
Fl0
Nice hard work bro
Молодец🤘👍
Great Idea Bro 👌👌
What a nise speaker
You have a great talent! Built quality is really good! When will this be available in market 😁
🙌😁😁
Good perfec 👍👍👍
🙌
Great job! How long will play with 1/4 of sound level?
Great video! But was the step up nevessary? I thought those bluetooth modules were designed for 3.7v.
The voltage on the battery will decrease to 2 volts, if you don't use step up it will reduce the amplifier's performance
Nice 👍🙂❤
Nice project
clean ✨
Very nice.
Saw first time The speker Is Dancing Himself On Its Own Beats😂
Keep it up bro ❤️
🙌🙌
Mantul simpel
Hi I am shiva from India.Is the product that i bought in website that you kept in description will delivered in India?
Good job!
What’s the tool called used in the video. Cutting tool
It's called a saw blade
VERY COOL STUFF COOL
🙌✨
So beautiful 💕. Amazing
Very nice build indeed! I guess that if you leave it turned on running on battery, it will run out eventually? Can it be made so that instead of a switch on/off button, the unit tuens off itself after a while if its not being used?
That depends on the amplifier/bluetooth module, some have that function and others don't. You could also make a circuit or maybe there is a module for that, but for this project I don't see much point in making it more complex.
Great job bro
box này là gỗ hay tấm alu thế anh
mantap
nice 😊
How can I add some buttons to this like volume adjust and song change?
Mantap bro
🙌
where do yu buy this amplifier module
Online shop
@@leoparddiy any link
bro why do you make a change in passive radiator?pl reply
I like it, it's optional😃
@@leoparddiy ok thnks bro where re yu from ?
@@leoparddiy oh nice 🙂
He changed radiators look... There is nothing more
For better looking
Bang kalo make speaker yang 4ohm bisa kah?
4-8ohm bisa
@@leoparddiy oke bangg
Hola, en que ciudad te encuentras?, Hi, what city are you in?
Bang kalo step up sama modul chargernya misah gimana cara soldernya
Charger batterynya duluan ke battery, trus battery ke input step up
❤😮🎉
I need how to make bluetooth speaker without startup sound very loud how to disable or which motherboard ?
Very nice bhi bana daga mere liya
What is the output ampere in 5V from the bms circuit that you used?
2A
@@leoparddiy if i use 3.7v input and boost to 5V, can I have 2A output really? 🥹
@@hasib1s The output from the step up is max 2 amps, it all depends on the battery. Of course you can use a 3.7volt battery but you have to use a capacity above 2amphere
@@leoparddiy there is no other option...I need 2A... so ensure me that this j5019 module can give 5v 2a output in 3.7v output... Please ensure me
I add 2ohm 5watt speaker in this module ,, in full sound it losses its connection automatically,, can you give me any solution??
Are you using a battery, if so, check your battery, make sure it's above 2amp so that the volume can be maximized. or maybe this amplifier is not recommended for 2ohm speakers, I have never tried it on this amplifier
BEST,...
😮😮❤❤❤❤
Nice speaker
Eu já quero❤️
Instead of that step up charging module use powerbank module costs 3 times less
Where are from bro...? I am from 🇮🇳🇮🇳🇮🇳.
And how much cost of making this bluetooth speaker.
I from Indonesia,,, maybe the total is estimated at INR1,326
@@leoparddiy really....?
Subscribed bro your channel❤❤
Thankyou for suport me🙏
надо сделать перегородку для динамиков они мешать будут друг другу и выпилять прорезь для телефона подставку сделать
Ay man is their a way u could send one of those to me the cheapest wasly possible
👋Hi!, i have question.
•can i adjust the sound through the phone?
•and can i add 2 more batteries like that?
just asking because i'm interested of making one 😌👍
waiting for your reply.
Thanks!!
Yes.. this can be adjusted via headphones...
You can use more than 1 battery ,, this module is recommended to use at least 2 batteries ,.. the more batteries the longer the use, with a note that this module only supports 3-5 volts, so you have to make a parallel connection if you want to use a lot of batteries ..
Thanks for the question
You could wire them in parrallel to increase ur capacity but depending on how big the box youre using is, you may have trouble fitting it
please you can make a passive speaker 🔊
Hi I am Shiva from India.If I bought a product from the website you kept in description Is the product will be delivered in zindia?😔
No. Only Indonesia.... you can get it from aliexpers
@@leoparddiy Oh! That I can buy it from aliexpress?🤔🤔So that it can delivered in India
Hi Bro can you make me one? Hehehe😅
we can't send the goods to your country, the shipping cost is very expensive, sorry🙏
Can the thickness be 4mm?
What glue did you use?
lovely
How much time will it play for
How much is it Sir? From Philippines 🎉
Can i order it Sir ?
Where can I buy this?
Is the 18650 a Samsung 30Q(3000 mah)or 35E(3500 mah)...? I'm not a bass head...(backup singers in a LEAD singer's song need MORE volume...not going to hold 'em back. I'll have to get some of these items from SOMEWHERE else...& NOT Amazon.) I'll have to get a POWERFUL wood glue to start this...
What wood is that
kon kon 2x pe dekh rha hai😂
Price kitne he iske
om, buat pembeliannya di toped juga dong. thx
What sound did you use can you provide the link thank you
Bluetooth module link please 🥺🥺
lem yang dipake buat nempelin speaker ke box pake lem apa
Lem fox
Bhai aesa mere ko bnaker de sakte ho kya ❤❤❤❤❤
Не плохо но одного 18650 мало два нужно
Nice
10:30 could you please explain to me can i do it with a simple meter?
Yess
Can it receive calls?
Прикольно
Bang diameter si kayu ke speaker brp itu.. biar pas kaya gitu
37mm
@@leoparddiy tebelnya berapa bang
terus kalo material box nya diganti pake pvc board 3mm kuat nggak?
Itu kayu 3mm, pvc 3mm kuat bng
Bisa order saya pesen...1 sesuai video
Boleh bang,, PO tapi bang, 2-3hari
Mana no wa nya bang atau kalo bisa pesen lewat shopee bang.. ? Di tunggu
If you ate Bluetooth speaker?
You messed up at the end with the radiator driver by putting it on the wrong way. Then you made it worse by cutting the centre out and glued it the other way round. Instead of just turning the whole thing around. Bad build as my opinion.
You should have made a partial between the speakers also as it will interfere with eachother. Dispite having a radiator driver. You would be missing a lot of clarity and separation. Mid high cancelling between each other. Or as some say muddy midrange. And distortion in the bass at high levels. Try using MDF wood. For better resonance
Nice observation as well as clear concepts, well done 👏
Mr. Nathan I want to make a bt speaker mono channel what size should I go for, I only want to use 1 speaker,I need a good base too
Like si eres amante al audio
Olá. Usou cola de sapato?
Yeah
None of the links work to buy the supplies and speakers
Di jual gk bang?
Ngga bng, buat koleksi aja