I got mine about last week sometime, and I've been enjoying it a lot. I've changed up the springs and balls quite a few times to check out new sounds, and atm I've found one I really like (though the dings irritate those around me more, lol) If you want to check out my current setup, just grab a couple of SS long springs from your Groove DIY kit (or other similarly long springs that aren't very strong), and two 3mm SS balls. Then just set these into the bottom two holes (toward the lanyard hole). Hope you enjoy this setting, if you decide to try it! It's much easier to push than most others I've tried as well. Oh, and if you are still having trouble gripping it, try pushing from the metal patch. I found the additional patch they included to have much better grip, as well. If you decide to change the patch (you called it a sticker I think), you can do it without unscrewing the body. To remove the first patch, you can use the included screwdriver to push it out using the hole on the inside of the device, right beside the track. It's best to hold the screwdriver close to the tip while pushing the patch out, so it comes off nice and clean. (I put the protective film from the 2nd patch over the glue on the back of the first one to keep it clean in case I want to reuse it) When putting in the 2nd patch, try and line the design up the way you want, and lay it in- then hold it in place tightly for 20sec or so, to allow the glue to adhere better. Sorry for the long comment, lol... I've been messing with this thing a lot, so i figured I'd share what I could for you or anyone else that may find it helpful. =] I'm sure I will keep changing things up, as well, but I think I'm going with the setup I described for a while at least! I hope you enjoy yours as well! Enjoyed the video ^_~
That's awesome that you're enjoying it so much! I really love mine too. It's so lightweight and easy to use. I use it mindlessly lol. I'll have to try that setup you're talking about! It sounds interesting. I love to mess around with different settings to try different sounds and feedbacks. I dunno if I'll change the sticker, though. I kinda like it as is. I do use it for grip also lol. Thanks for the comment! And thanks for watching! 🩵
You spent $52 on that when you could have just bought a click eraser for $1.25 at the dollar tree... Same thing except you would have the added benefit of an eraser.
Ha! You see, I already have a collection of stationery full of erasers. I'm lacking in ping makers! Can never have enough. Plus, I can't take apart an eraser and have the parts explode at me! Takes away all the fun!
@@FidgetGirlEDC this is a German meme, it refers to a UA-cam video where someone reviewed like hundreds of fidget spinners in a really long video. And his comment to a lot of those spinners was: "also beschweren kann man sich da eher weniger" wich does roughly translate to: " so I can't really complain about this one" hope that clears things up for u
i am happy with my good old Rebound, a good little ping macine as you would call it 👌🏼 10$.
Maybe I should check out that Rebound. It seems pretty cool! I do love a variety of ping machines.
I got mine about last week sometime, and I've been enjoying it a lot. I've changed up the springs and balls quite a few times to check out new sounds, and atm I've found one I really like (though the dings irritate those around me more, lol)
If you want to check out my current setup, just grab a couple of SS long springs from your Groove DIY kit (or other similarly long springs that aren't very strong), and two 3mm SS balls. Then just set these into the bottom two holes (toward the lanyard hole).
Hope you enjoy this setting, if you decide to try it! It's much easier to push than most others I've tried as well.
Oh, and if you are still having trouble gripping it, try pushing from the metal patch. I found the additional patch they included to have much better grip, as well.
If you decide to change the patch (you called it a sticker I think), you can do it without unscrewing the body.
To remove the first patch, you can use the included screwdriver to push it out using the hole on the inside of the device, right beside the track. It's best to hold the screwdriver close to the tip while pushing the patch out, so it comes off nice and clean.
(I put the protective film from the 2nd patch over the glue on the back of the first one to keep it clean in case I want to reuse it)
When putting in the 2nd patch, try and line the design up the way you want, and lay it in- then hold it in place tightly for 20sec or so, to allow the glue to adhere better.
Sorry for the long comment, lol... I've been messing with this thing a lot, so i figured I'd share what I could for you or anyone else that may find it helpful. =]
I'm sure I will keep changing things up, as well, but I think I'm going with the setup I described for a while at least!
I hope you enjoy yours as well!
Enjoyed the video ^_~
That's awesome that you're enjoying it so much! I really love mine too. It's so lightweight and easy to use. I use it mindlessly lol.
I'll have to try that setup you're talking about! It sounds interesting. I love to mess around with different settings to try different sounds and feedbacks. I dunno if I'll change the sticker, though. I kinda like it as is. I do use it for grip also lol.
Thanks for the comment! And thanks for watching! 🩵
What does it do? I'm confused
Its a fidget
It's something that's used to keep the mentally disabled occupied.
@@FLAXPILOT Oh got it! I got one of those multi ones. Sure beats picking at my thumbs
It makes ping sounds when you slide it back and forth. It's a lightweight fidget that's very easy and fun to use. It's nice!
This thing has a wild sound to it!! I kinda dig it! Wish it had some knurling or something for grip though.
Yeah, the sound is out there! Definitely would benefit from some kind of grip element though, I agree with you. It's very slick.
You spent $52 on that when you could have just bought a click eraser for $1.25 at the dollar tree... Same thing except you would have the added benefit of an eraser.
Ha! You see, I already have a collection of stationery full of erasers. I'm lacking in ping makers! Can never have enough. Plus, I can't take apart an eraser and have the parts explode at me! Takes away all the fun!
Beschweren kann man sich da eher weniger
I'm not sure if this is a translation error, but I wasn't complaining? This thing is great!
@@FidgetGirlEDC this is a German meme, it refers to a UA-cam video where someone reviewed like hundreds of fidget spinners in a really long video. And his comment to a lot of those spinners was: "also beschweren kann man sich da eher weniger" wich does roughly translate to: " so I can't really complain about this one" hope that clears things up for u
@flexithefurry11yearsago10 ohhh! Okay cool! Thank you! That does clear stuff up lol. That's funny lol