Thanks ...I watched several iPad screen protector install videos but this video does the best job explaining how to use the tape pieces to create a flexible hinge for easy and perfect installation. Many of the other videos didn’t even mention making a tape hinge. My kit did NOT come with tape so thanks to this video I used 5 pieces of painter’s masking tape, each 1.5 inch wide x 4 inches long. More tape pieces the better to create a secure hinge. Before cleaning & before removing the film on the screen protector, test your tape hinge a couple times to see the action of flipping over the screen protector. If you don’t like where the screen protector ends up, (example, not perfectly centred over the home button), then adjust the tape pieces by starting over. Again, this hinge test must be done prior to removing the film on the screen protector. Wash hands not shown here but you’re forgiven. My kit’s wet alcohol pad was dried-up right out of the pack.... likely a good thing because I used a quality eye glass cleaner solution and the soft cloth that came with the eye glasses which is lint free. I used a super powerful flashlight to check for lint & dry screen. Other videos cover off the screen cleaning process a bit better. With film removed, the screen protector Install went slow & smooth & perfectly. 😁. I had a badly cracked screen so I had to push several times with a finger to get the protector to stick along the cracks. Two main reasons for a successful install 1) super clean iPad screen, no lint. 2) the masking tape hinge idea I got from watching this video. Thanks again. 👍😍
I just put the tempered glass after watching your video on my iPad.. thanks now no need to Go to any shop..learned the technique.. no bubble on screen as well
Hi actually just needed to use two hinge stickers on one side and the 3rd hinge sticker on the other side, so you don’t have to use your hands when sticking it on and folding it.
Am extremely impressed with your guide. No wasted chat. You just got on with it. Very clear and concise. I watched it few times then applied the screen pausing as I went along. I wondered what the little guide stickers were about Applied and no bubbles. Tip ... I put the mini iPad on a slightly damp wash cloth to hold it steady 🙏
I have my school tablet for 3 year's now I think It's Mine for the keeping. I have 2 green stuck pixels on the screen I don't know if they're dead or stuck. I'm going to order a LCD screen replacement and the screen protector.
Damn I was waiting for the part where you get out the bubbles but there weren't any! This video was perfect, I have to put one on my daughters ipad. idk why they dont teach this to people that work in cell phone shops and stuff. Ive watched them go through 3 or 4 protectors before they got it right lol
You are big! Thank you, this is a perfect method. I’ve been putting up the family’s glass foils for a long time, and the result has never been so easy and perfect. I put it on my iPad, but I'm going to do it on iPhons from now on.
Thanks a lot bro iam just searching for this type of glass and equipments as I got same this...and with your video's help I'm capable of doing this 😃😃 thanks
That was great. I liked this technique. I got mine on evenly but had to move it a few times to get it positioned correctly. It had a couple of bubbles but have since gone away. Your way looked much easier. If this one breaks I’ll know what to do next time. 👍🏾
hi ,thank you ,i followed your way exactly but im having a problem,it doesnt seem to want to lay all the way down,all along the edge of my ipad is air ,but other then that it worked out fine ,also i didnt notice a hole in screen for the camera,is that normal? and after you put the sticky side down,you didnt show all the way to end,is there a top that needs to come off or is that it? thank you
Thanks. This was a very helpful video. I'm installing the exact same glass cover. It came out perfect. Would it have killed you to narrate the install though? That music made me want to throw my phone against a wall. (I ended up just muting it.)
JTech screen protector for ipad 7 install, just go to JTech video to show you how to install. This guy cleans before putting the alignment tabs on. I don't recommend this, put alignment tabs on first and then clean.
Thanks ...I watched several iPad screen protector install videos but this video does the best job explaining how to use the tape pieces to create a flexible hinge for easy and perfect installation. Many of the other videos didn’t even mention making a tape hinge.
My kit did NOT come with tape so thanks to this video I used 5 pieces of painter’s masking tape, each 1.5 inch wide x 4 inches long. More tape pieces the better to create a secure hinge. Before cleaning & before removing the film on the screen protector, test your tape hinge a couple times to see the action of flipping over the screen protector. If you don’t like where the screen protector ends up, (example, not perfectly centred over the home button), then adjust the tape pieces by starting over. Again, this hinge test must be done prior to removing the film on the screen protector.
Wash hands not shown here but you’re forgiven. My kit’s wet alcohol pad was dried-up right out of the pack.... likely a good thing because I used a quality eye glass cleaner solution and the soft cloth that came with the eye glasses which is lint free. I used a super powerful flashlight to check for lint & dry screen. Other videos cover off the screen cleaning process a bit better.
With film removed, the screen protector Install went slow & smooth & perfectly. 😁. I had a badly cracked screen so I had to push several times with a finger to get the protector to stick along the cracks.
Two main reasons for a successful install 1) super clean iPad screen, no lint. 2) the masking tape hinge idea I got from watching this video.
Thanks again. 👍😍
Haven't you heard about warm shower method that prevents formation of dust?
I just put the tempered glass after watching your video on my iPad.. thanks now no need to Go to any shop..learned the technique.. no bubble on screen as well
Great job!
Hi actually just needed to use two hinge stickers on one side and the 3rd hinge sticker on the other side, so you don’t have to use your hands when sticking it on and folding it.
Am extremely impressed with your guide. No wasted chat. You just got on with it. Very clear and concise. I watched it few times then applied the screen pausing as I went along. I wondered what the little guide stickers were about Applied and no bubbles. Tip ... I put the mini iPad on a slightly damp wash cloth to hold it steady
🙏
Glad it helped!
I have my school tablet for 3 year's now I think It's Mine for the keeping. I have 2 green stuck pixels on the screen I don't know if they're dead or stuck. I'm going to order a LCD screen replacement and the screen protector.
After installing the Tempered Glass, does Apple Pencil works better as before???
yes, absolutely perfect.
Can you please recommend me the best glass for I-Pad Air 3
@@arnabmisra9973 ..suggest same for me too bro
Did this on my iPad a while ago. Just replaced one on my iPhone. Very useful thank you 🙏
Great to hear!
Damn I was waiting for the part where you get out the bubbles but there weren't any! This video was perfect, I have to put one on my daughters ipad. idk why they dont teach this to people that work in cell phone shops and stuff. Ive watched them go through 3 or 4 protectors before they got it right lol
Very good video. No chatting. And you also showed how to use the guide stickers and patting paper.
You are big! Thank you, this is a perfect method.
I’ve been putting up the family’s glass foils for a long time, and the result has never been so easy and perfect. I put it on my iPad, but I'm going to do it on iPhons from now on.
Wonderful!
It worked out perfectly. Thanks a lot! Also, even the melody helps...
Glad to hear that!
Just put a guard on my iPad 8th gen after watching your video.
Did it without a single air bubble.😁😎😎.
Thanks bro
Did your experience of writing with apple pencil change?
@@LP-bf9oe nope it didn't
How do you get a side bobble out
Thank you very much! That was clever with those three hinge stickers.
Putting this on after my screen is cracked 😂
I feel you 😂😂😂
same lmao
Been there, done that😂
I cracked my ipad screen not knowing I had a protector phew
@@cyrusq sameeeee💀
I found the video was just what I needed. It came out perfect, can’t Waite to do my iPhone.
I did it for the very first time and Voila! No bubbles 😎
Thank you! I tried and worked perfectly.
Great!
is it easy to replace it in case it brokes?
Yes
Thanks a lot bro iam just searching for this type of glass and equipments as I got same this...and with your video's help I'm capable of doing this 😃😃 thanks
Great 👍
Very useful and I did it myself by following the instructions in this video. Thanks
Can i use ordinary tape instead of stickers?
Yes, use that tape which shouldn't left any residue.
Does the small circles come out after a while I got like 3 little circles in there lol
What is the song in this video???? I really love this music!!! Also, the video was very helpful!
Thanks so much did not get any bubble what do ever
Very helpful 👍🏾. Maryland showing ❤️
The shower/steam method is still the best and safest method. I have yet to see a better one.
dss ddt qed waaf wavy s savv SHS xyz dress catty scattered axdxfwdxxvaxvsscssqqwdasdcsbad
Gem of a technique❤
One question does it covers invisible scratches
Installation actually vey easy..the hardest things is to keep dust free after installing the tempered glass 🤦thanks for your video mate 👍
always wondered about the stickers.
Brriannnna❤😊😊
Just followed your steps! Thank you for this
now I know what's the purpose of those stickers. I thought all of them are just for removing dust.thanks for the tutorial
All the dislike is come from phone shop owner 😂
perfect video bygod so true and amazing . i successfully install glass on my ipad
That was great. I liked this technique. I got mine on evenly but had to move it a few times to get it positioned correctly. It had a couple of bubbles but have since gone away. Your way looked much easier. If this one breaks I’ll know what to do next time. 👍🏾
How did you get rid of the bubbles? I just got mine and it has it too.
@@diogofarias1822 It just flatten out on its on.
Bhai kafi lamba intezaar karwaya
Hey are we supposed to dance along when we do this. Solid beats. 😀
What ipad is that is that the ipad 5th gen?
iPad 10.5 Pro
Did this on my ipad pro 12.9
It basically laid itself woth no bubbles
I haven’t commented on any UA-cam videos but this was very useful for me thank you so much for life hack skills
Thank you so much u save my Money
Thank you!! I tried it for the first time and there are no bubbles and it's clean.
Great to hear!
Perfect! Many thanks
You are welcome!
Thank you so much I loved watching it 😊😮😊
Which ipad is this
iPad 10.5 Pro
I want to like the protection and I'm doing it now
hi ,thank you ,i followed your way exactly but im having a problem,it doesnt seem to want to lay all the way down,all along the edge of my ipad is air ,but other then that it worked out fine ,also i didnt notice a hole in screen for the camera,is that normal? and after you put the sticky side down,you didnt show all the way to end,is there a top that needs to come off or is that it? thank you
Did your experience of writing with apple pencil change after putting the tempered glass?
*NO*
Thank you !!!
thanx fit int 12.9
😃😃😃😃😃😃
Glad to help !!!
:)
Thanks alot..😇
I keep trying to put my screen protector on but hair and dust get stuck to it and it drives me crazy
Awesome and very useful video, thanks Lovepreet ! 🙏🙏🙏
You’re welcome Dear ...
Thank you
Actually this looks very complicated. Gotta call my surgeon over for this one.
My god! Check out all the fingerprints he put on the protector!
Great video.
Thanks!
Thanks for the help
Happy to help
I just ruined my first screen protector so I decided it was better to watch a tutorial, I didnt know what the stickers were for, thank you
Glad I could help!
I didn’t know use of that stickers and I applied screen gurad on my ipad 8th gen and now Ism happily typing with misaligned screenguard
Thnks, great, I did it with the help your video, God bless you 👍
Glad it helped
Is there actual glue on these screen protectors or is it just adhesion which makes it stick to the glass?
Muchas gracias, no tenia ni idea de instalar el cristal templado en la tablet, tu video me ha servido de toda la ayuda posible.
This video helped me a big time. Thanks man
What is the model of this ipad
iPad Pro 10.5
Thanks sir
Welcome
Watching this for fun after replacing a cracked screen protector (I’m typing on that device)
ohhhhhh that's how you use those aligning tapes
What’s the background music?
Alan Walker faded
I'm sure this comes with directions so why does everyone appear to do this differently?
Very nice
Thanks for this video it helped me install tempered glass on my own at home
Thank you! I understood what the other elements were for and got a perfect bubble free placement. Thanks again!
Amazing trick for the alignment of the guard
Great video.Thanks
Thanks buddy
Helped a lot
Will it work on ipad 2018 9.7?
Yes
Thx , can give me best buy link?
Best Buy - amzn.to/2J9t1ro
Thanks. This was a very helpful video. I'm installing the exact same glass cover. It came out perfect.
Would it have killed you to narrate the install though? That music made me want to throw my phone against a wall. (I ended up just muting it.)
Didnt work and i am very sad about that
why is this the most stressful task. literally makes me sweat.
Still struggling and my new tablet looks like shit with protector on it , with bubbles . Needs some skills !
Loved it. Thanks a ton. Easily done.🙏🙏
#VinayPrabhakarJi,
Welcome Dear 🙏🙏
I litterly did exactly what you did 3 times and it didn’t work
My tempered glas is sliding too much on ipad pro, can I use a matte screen protector over the tempered glass?
Thank you! You really helped us!
tq brooo for instruction
Great.
Thanks paaji
Welcome Dear 🙏🏻
Thank you so much for this tutorial, god bless you
Glad it was helpful!
Hlo bro how to install on ipad air 10.5 inches
😀😀
Ganito Pala hehw
JTech screen protector for ipad 7 install, just go to JTech video to show you how to install. This guy cleans before putting the alignment tabs on. I don't recommend this, put alignment tabs on first and then clean.
দাম কত
Who else is watching this through giant bubbles under your screen cover?
Why it looks so hard
,👍👍👍👍👍👍👍💖
The music has got to go!!!!
I accidentaly dropped my moms ipad- HELP.