What a absolute life saving video! I had this issue this morning and started thinking the worse. I'm no Mechanic but I spotted what the issue like you pointed out in the video. Picked up the part for $18 and fixed it in 5 minutes. Thank you!!!
Thank you!!!! I was stuck in a bad area about 45 minutes from home and thought I was about to be calling road side service in 100 degree brutal heat.....this helped and after 3 attempts at getting right part and dropping them somewhere in the engine area I successfully repaired by myself.....I thought I was looking at a huge problem.....thank you for taking the time to share!!! Ford either owes you big thanks....or hates you from stopping them charging crazy rates to fix. You are awesome!!
My 2019 Fusion got the same error a week and a half ago. It was the bushing that popped off. I bought the upgraded bushing and cap from Ford. Total cost was $4.90. The Ford dealership was going to charge me $289 labor. It took me approximately 7 minutes to install it myself. Ford needs to extend the recall to include 2019 and 2020 Fusion models, as they still came installed with the flimsy white bushings.
You can order the bushing from Amazon here www.amazon.com/dp/B00JW1VXTK?ref_=cm_sw_r_apan_dp_KAVN2T9PSXZC2BTMHCG3. Good luck and thanks for watching. This should solve your problem.
Yes I'm having that problem right now as I texts this. I have a 2020 Ford Fusion and mine started doing it last night. I had to call 911 they had my car towed. NOW IM STUCK OUT OF TOWN AND NEED HELP. I'm at my sis house so I'm safe BUT if anyone can help me please do on what I need to do NEXT. PLEASE ANYONE. I will give out my number if someone can help me NOW. thank you all I hope someone see this message soon cause IM STUCK AND CANT MOVE.
just fixed my ford fusion 2017. Awesome video and instructions. Bought the same Dorman Parts. I also used a drill / screwdriver to loosen the clamps to the two big pipes (not sure what it's called) forced the rubber piece off so you have more space to work on the bushing. sprayed on wd-40 on the bushing prior and waited a few minutes. Easy fix once you get in. Beautiful video!!
Beautiful video. Thank you. Your video is wonderful. Just what I needed. SN: has NOTHING to do w/you b/c you’re heaven sent. But why would they make it like this??!!!
is it possible that due to this issue the car takes like 3 -4 seconds to take the R i put the cable with out the bushing I just order the bushing but since I was on the middle of the night I was not able to call anyone so you video basically saved my life
Hell yeah I had the same issue it was hard as hell to get it on that pin took me like 2 hours it’s really cramped in there the cap kept falling thru the engine to the ground but once I got it on and but the cap on the top it was all good the part cost me like $20
Just did this was hard with my big hands but what i did. Had someone sit in the car put it in drive and hold the break. Pulls the pin down out in the open you can put it on real quick. I tried shutting the car off while it was in park but goes back into park when car shuts off. Not the safest but got it done in less than 5 minutes.
You should be able to get the bar to move back by turning the gear select knob. Try moving it from park to neutral and see if you are able to line it up. Good luck!
What a absolute life saving video! I had this issue this morning and started thinking the worse. I'm no Mechanic but I spotted what the issue like you pointed out in the video. Picked up the part for $18 and fixed it in 5 minutes. Thank you!!!
Glad it helped. Always a great feeling when you can fix it yourself. Thanks for watching.
Thank you!!!! I was stuck in a bad area about 45 minutes from home and thought I was about to be calling road side service in 100 degree brutal heat.....this helped and after 3 attempts at getting right part and dropping them somewhere in the engine area I successfully repaired by myself.....I thought I was looking at a huge problem.....thank you for taking the time to share!!! Ford either owes you big thanks....or hates you from stopping them charging crazy rates to fix. You are awesome!!
Fantastic. Saving lives and saving money. Glad my video helped. Thanks for watching.
My 2019 Fusion got the same error a week and a half ago. It was the bushing that popped off. I bought the upgraded bushing and cap from Ford. Total cost was $4.90. The Ford dealership was going to charge me $289 labor. It took me approximately 7 minutes to install it myself. Ford needs to extend the recall to include 2019 and 2020 Fusion models, as they still came installed with the flimsy white bushings.
Love it. Glad you were able to fix it yourself. Thanks for watching.
I have a 2018 fusion and today my car wont shift gear and its giving me the same warning light. Hopefully this is the same problem.
Can you please tell me how did you ordered the part from Ford and what part number it is. I would really appreciate it 🙏🏻
You can order the bushing from Amazon here www.amazon.com/dp/B00JW1VXTK?ref_=cm_sw_r_apan_dp_KAVN2T9PSXZC2BTMHCG3. Good luck and thanks for watching. This should solve your problem.
Yes I'm having that problem right now as I texts this. I have a 2020 Ford Fusion and mine started doing it last night. I had to call 911 they had my car towed. NOW IM STUCK OUT OF TOWN AND NEED HELP. I'm at my sis house so I'm safe BUT if anyone can help me please do on what I need to do NEXT. PLEASE ANYONE. I will give out my number if someone can help me NOW. thank you all I hope someone see this message soon cause IM STUCK AND CANT MOVE.
THANK YOU SO MUCH! I used this video to fix my girlfriend’s car and scored so many brownie points lol but even more so- saved us money!
Excellent! Always great when you can make your girlfriend happy!
This video save me a lot of money
Excellent. Glad it helped!
just fixed my ford fusion 2017. Awesome video and instructions. Bought the same Dorman Parts. I also used a drill / screwdriver to loosen the clamps to the two big pipes (not sure what it's called) forced the rubber piece off so you have more space to work on the bushing. sprayed on wd-40 on the bushing prior and waited a few minutes.
Easy fix once you get in. Beautiful video!!
Excellent! Glad I could help and thanks for the extra tips.
Clean that connection before reassembly!
@@raymondpeng772 where did you buy the part I have a 2017 Ford fusion and when I look online it says most of the parts don't fit my vehicle
@@JM-ox6ji Amazon sir just type in the part number.
This video is perfect, thank you very much I just fixed my car and I never thought I would be able to do this.
Glad it helped you out. It always feels great to fix it yourself. Thanks for watching.
Beautiful video. Thank you. Your video is wonderful. Just what I needed.
SN: has NOTHING to do w/you b/c you’re heaven sent. But why would they make it like this??!!!
Glad I could help and thanks for watching.
Gracias desde México, you saved my life
Glad it helped! Thanks for watching.
I hope this part works with my Fusion also. Almost got stranded 30 some odd miles away from home when this stupid thing came loose.
Thank you so much man! This worked.
Glad I could help. Thanks for watching.
is it possible that due to this issue the car takes like 3 -4 seconds to take the R i put the cable with out the bushing I just order the bushing but since I was on the middle of the night I was not able to call anyone so you video basically saved my life
Glad it helped.
Saved me a $240 tow and more had I not seen this
Fantastic! That's the goal of this channel. Glad I saved you some money and trouble. Thanks for viewing.
Great Content, Thank you so much!
Glad it helped!
good video nice explanation
Thank you. Glad it helped.
The 2019 same car, is the cable in the same place? I don't see it where the 2017 is?
I haven't worked on a 2019 but I would expect it to be similar.
Hell yeah I had the same issue it was hard as hell to get it on that pin took me like 2 hours it’s really cramped in there the cap kept falling thru the engine to the ground but once I got it on and but the cap on the top it was all good the part cost me like $20
Good work! Glad you got it.
Just did this was hard with my big hands but what i did. Had someone sit in the car put it in drive and hold the break. Pulls the pin down out in the open you can put it on real quick. I tried shutting the car off while it was in park but goes back into park when car shuts off. Not the safest but got it done in less than 5 minutes.
Excellent. Glad you got it and thanks for the added tip!
Can you link the item in the video please?
Sure thing www.amazon.com/dp/B00JW1VXTK?ref_=cm_sw_r_apan_dp_KAVN2T9PSXZC2BTMHCG3
What about a 2020?
Should work for 2013-2020. Possibly other years as well.
I couldn’t find that part
You're the shit man!
Thanks! Glad I could help. Appreciate you watching.
The bar with the bushing on it is slightly past the place it goes 😢
Same issue here
You should be able to move the shifter to get the bar to move.
@@gottafixit yessir figured it out finally after messing with it lol
Fantastic. Good job!
How did you move it. I can’t on 2019
The bar with the bushing on it is slightly past the place it goes 😢
You should be able to get the bar to move back by turning the gear select knob. Try moving it from park to neutral and see if you are able to line it up. Good luck!