Polaris Ranger Inferno Heater Step-by-Step Install
Вставка
- Опубліковано 28 сер 2024
- In this video I install an Inferno heater in a 2019 Polaris Ranger XP1000. I go step by step through the install so it is eazy to understand and straight forward. I hope this video helps you to install this heater. I get the camera in whenever possible. If you like this video please subscribe and give it a like.
Thanks for watching.
#Infernoheater
#polarisranger
This a great video. You explain and show every step. Also, you are a gentleman with you language and I appreciate that. Also, I can understand your language. I have a Ranger 500, but I couldn't find an install video for it. I know that some of the install will be different, but your video on the 1000 was very helpful.
Wow, my install was so much easier with you on my laptop right next to me. Great video, thank you so much!!
Glad it helped. That is why I do it. Please subscribe to my channel if you can.
By far the best video Ive seen for this! Great job!
Thank you. Please like and subscribe if you can. More videos to come.
Thanks. Gonna go install mine on brand new 2023 XP1000 premium today.
Take your time and enjoy.
I have a brand new premium I will be doing next week. Let us know how you did
Thanks for the help. I’ll be doing mine next week.
Thank you so much for making this video
I'm thinking of getting this heater for my 2023 ranger xp does this heater really work good in the cold to keep the windshield defrosted and to keep it comfortable inside I don't wanna go through all the work for half ass heat lol good video by the way!
I installed this heater for a buddy of mine and he really likes it. He has a glass front windshield and he says it works great. He also has full soft doors and says it is comfortable on cold days. It has the same vents my Ranger Northstar Ultimate had so I believe it works well. The ones I cut right under the windshield would be the game changer. Hope this helps.
Just if the in and out prestone/collant cant be one or the other "hole"
Super helpful.
Good job
Great video!! What kind of coolant did ya top it off with?
Just general purpose coolant that is premixed.
Good video. Just one issue I had loose clamps somehow where it comes off the blower motor and tighened them up and still getting some very little splatter and moist on the firewall / blower motor! How tight can you actually tighen them clamps to the blower motor?
Tighten them nice and snug.
@@blueberryridgeoutdoors I did go out and tightened them snug and still leaking. So with this snowstorm coming this week I hope it makes it theough plowing for it I will have to get a hold of Inferno and see what they say..And willl probably have to tear it apart again and check everything which is a pain!
@@robertallen2797 sorry to hear that. Where is the splatter and moisture coming from?
@@chadschudy1392 it is coming from the coils inside the cab or either where the hoses hook on or the coil itself. I called the dealer I bought it from and he said to put a little bit of pepper in the radiator and let it run a couple of cycles and it should seal it! I did that and now I have no heat but the enter and exit lines are hot, but I can squeeze the lines no problem when up to temp. And you shouldnt be able to correct? I tried to call the dealer I bought it from and never any answer , wont answer emails , return calls. Just dont know what else to do!ight have to take it to a dealer and see if there is air or something in the lines , I pulled the bleeder screw and a flow came out with the cap off and still no heat. When its running the coolent will drop way down for a bit then shoot up and flow over... What am I doing wrong?
Sounds like air in the lines. Did you clamp off the coolant line before you cut it? You might have better luck contacting Inferno heaters directly.
Is the rocker switch just on and off? Or is there multiple settings for heat? Thank you!
The rocker switch has low and high fan speeds. That is the two positions besides off.
Coolant in or collant out on inferno can be either?
I don't understand. What are you asking?
What side mirrors do you have
It is my buddies machine and he just bought a cheap set and made extensions for them. He is pretty handy.
Hello, Are you interested in testing products? We would like to invite you to test the tinted rear windshield for your 2019 Polaris Ranger XP1000
It is my buddies machine, but we could review it if you send it to me.
@@blueberryridgeoutdoors Thanks for your reply.
Thanks for the help. I’ll be doing mine next week.