How To Make Bluetooth Speaker From PVC Pipe At Home

Поділитися
Вставка
  • Опубліковано 19 січ 2021
  • How To Make Bluetooth Speaker At Home From PVC Pipe !!!!
    Hello Friends !!!!
    In this video i am gonna show you "How To Make Bluetooth Speaker At Home using PVC Pipe ",This Homemade Bluetooth speaker is very loud and you can easily make it by your own .I have used PVC for making body of this Bluetooth speaker and some electronics which are given below.
    This Bluetooth speaker is very long lasting and very loud , it can continuously work for 4 hours and its battery backup is very good, this homemade bluetooth speaker looks very authentic and this is very similar to the bluetooth speaker purchased from market.This homemade bluetooth speaker is very handy . You can Carry this Homemade Bluetooth speake in your pocket.
    This bluetooth Speaker is made from hard PVC plastic Pipe so its build quality is very good. You can also use this bluetooth speaker while walking or trekking . This " Homemade Bluetooth Speaker is very cheap and the electronics i have used are easily available online.
    The Things i used for making this "Homemade Bluetooth Speaker" :
    1. PVC Pipe (50 mm)
    2. Speaker ( 4 Ohm 3W)
    Buy Link - amzn.to/2WA51TW​
    3. Amplifier Module
    Buy Link - amzn.to/3jfXoMp​
    4. Bluetooth Module
    Buy Link - amzn.to/3jipFlo​
    amzn.to/2BeMNjw​
    5. Charging Module
    Buy Link - amzn.to/2OFyxTZ​
    6. 3.7 V Battery
    Buy Link - amzn.to/2CO3MJW​
    7. PVC Pipe Sheet
    8. Small Switch
    Products I Used :
    Camera -amzn.to/2PVaZ13​
    fkrt.it/K!PEAfuuuN​
    fkrt.it/KOgn1fuuuN​
    Tripod-amzn.to/2HSOHGR​
    fkrt.it/K!2E1fuuuN​
    Laptop-amzn.to/2ZMkCme​
    fkrt.it/KTejkfuuuN​
    Product Links
    Brushless Motor:
    amzn.to/2Kn34U1​
    amzn.to/31fkpVR​
    Esc:
    amzn.to/2GLM7BF​
    Servo Tester:
    amzn.to/2YFmDMG​
    Lipo Battery:
    amzn.to/31dRnWH​
    Arduino :
    fkrt.it/9AHvL6uuuN​
    fkrt.it/9g6Qu6uuuN​
    Motor Driver :
    fkrt.it/EyfKfcNNNN​
    fkrt.it/Et7hfcNNNN​
    Jumper Wire:
    fkrt.it/9g~Eu6uuuN​
    Bluetooth Module:
    fkrt.it/Et6E4cNNNN​
    Rc Car:
    fkrt.it/Et6H6cNNNN​
    Flipkart Buy Links-
    fkrt.it/v0T5q2NNNN​
    At cheap Rate-
    fkrt.it/XhwhTcNNNN​
    fkrt.it/XhISTcNNNN​
    fkrt.it/XhOUTcNNNN​
    RC Car Under 500 Rs-
    fkrt.it/FRbT~6uuuN​
    fkrt.it/FRly66uuuN​
    Amazon Buy Link-
    amzn.to/2XtuvRw​
    #HomemadeBluetoothSpeaker​ #MakeBluetoothSpeaker​ #PVC_Pipe_BluetoothSpeaker​
    How do you make your own Bluetooth speaker?
    How can I make a portable Bluetooth speaker at home?
    How can I make a homemade speaker?
    how to make a simple bluetooth speaker
    homemade bluetooth speaker box
    how to make a bluetooth speaker from cardboard
    diy bluetooth speaker kit
    how to make speaker at home
    how to make bluetooth device circuit
    convert speaker to bluetooth diy
    how to make a bluetooth speaker from cardboard
    build your own bluetooth speaker kit
    diy bluetooth speaker with car speakers
    how to make a bluetooth speaker louder
    diy bluetooth speaker plans
    How can I make a homemade music system?
    How to make bluetooth speaker at home in hindi
    How to make bluetooth at home
    How to make a simple Bluetooth speaker
    How to make a DIY Bluetooth speaker at home
  • Наука та технологія

КОМЕНТАРІ • 456

  • @technicalninja711
    @technicalninja711  3 роки тому +64

    Hello Friends !!!
    Video kaisi lagi...???
    Agar aap iska giveaway chahate ho to instagram pe follow karo. @avi_damse

  • @uzair.saleem
    @uzair.saleem 3 роки тому +11

    This is the most beautiful and clean speaker i have seen building...👍👍 Great job

  • @deadpooltm9088
    @deadpooltm9088 3 роки тому +3

    Itni acchi finish ing h bhai like market se laya gaya ho😘👌

  • @memekakhazana2733
    @memekakhazana2733 3 роки тому +20

    I have no material to make this😭and the rate in online shopping is so high😢😢😭
    But i want this
    Do you give me this speaker😊

    • @Brown_munda33
      @Brown_munda33 3 роки тому +2

      Bro you order from quatx camonents

    • @Arnab_is_good
      @Arnab_is_good 3 роки тому +1

      Buy offline that would be cheaper from online

    • @memekakhazana2733
      @memekakhazana2733 3 роки тому +1

      @@Arnab_is_good i live in jaipur.
      So,there is no place to buy them offlinr

  • @bgaraujo21
    @bgaraujo21 2 роки тому +2

    This was a very good project! One thing that maybe add is a thin sheet of foam inside to make the sound less resonant

  • @mr3editz
    @mr3editz 3 роки тому +2

    Excellent work..
    By adding Led's it's went to next level

  • @GotaSir911
    @GotaSir911 3 роки тому +2

    Wow! Amazing idea. Try building a 12-24 volt voltage supplier next time with adjustable voltage using a potentiometer

  • @HAMMADKHANCREATION
    @HAMMADKHANCREATION 3 роки тому +1

    *Techinical ninja* you are one of those people from which i got inspiried to make *creative* *stuff*

  • @_Asgar
    @_Asgar 3 роки тому +5

    Next video topic :
    How to make Electric Money Bank
    Good Job 👍🏻

  • @carlospetre4868
    @carlospetre4868 3 роки тому +2

    Felicitaciones!! Un excelente diseño y miy bueno su ingenio !!

  • @jesrelsunit60
    @jesrelsunit60 3 роки тому +1

    My brain tells me to make a jbl go3 diy just by first look of the thumbnail. Nice work tho!

  • @_jesniha_
    @_jesniha_ 3 роки тому +6

    Can you upload "how to make a RC plane,rocket,boat" ☺😊😎

  • @GHOLAPSHIVANSH3677
    @GHOLAPSHIVANSH3677 3 роки тому +12

    1st comment and 1st like of me and I'm big fan of you bro

  • @vijayjayaram606
    @vijayjayaram606 3 роки тому +1

    Isko koiroko bhai please. Ye banda ghar baithe baithey machine wala finish to takkar de raha hai
    😜😜
    Paagal scientist
    💪😋🤘

  • @kobiru2339
    @kobiru2339 3 роки тому

    He make all things using only pvc pipes, what can you believe this. Love you sir

  • @vigneshsaravanan6524
    @vigneshsaravanan6524 3 роки тому

    Designing and build performance mass 😘😘🔥🔥💯💯

  • @mohitkumawat2928
    @mohitkumawat2928 3 роки тому

    Superb it was really fantastic from 1 to 100th step; at first time I was shocked that it was bring from market , it was really great finished work

  • @tahsinislam2274
    @tahsinislam2274 3 роки тому

    Why my favorite sound box you are so good thanks by Tahsin.

  • @BBGGalaxy
    @BBGGalaxy 3 роки тому

    Thank you very much technical ninja for you only I have made my own bluetooth speaker with PVC pipe only following your steps only

  • @Sakib_ahmmed_limon21
    @Sakib_ahmmed_limon21 3 роки тому +5

    Big fan ❤🔥from 🇧🇩

  • @thecreatorpro9663
    @thecreatorpro9663 3 роки тому +1

    Sir sir sir big fan kya bolu sir Aap ky bary mai itna perfect projects koi kasy bana sakta hai sir koi big Giveaway karo please big fan I'm

  • @makerx2015
    @makerx2015 3 роки тому +2

    Fico muito bonito parabéns 👏😍👏😍

  • @nischalsinghchauhan8244
    @nischalsinghchauhan8244 3 роки тому

    पावर बैंक भी बनाओ इसी पाइप से👍👍

  • @yugnimbone183
    @yugnimbone183 3 роки тому +4

    Bro please aisa hi ek bada speaker banao bhai par vo pvc pipe ka mat bannan

  • @techways
    @techways 3 роки тому +2

    Literally now your voice in your video 😘👍 but so many component not available on my town bro please make next video on amplifier 🙏

  • @himanshukumar6077
    @himanshukumar6077 3 роки тому

    Bhai bohot hi awesome looking speaker hai 👍👍👍😎😎

  • @SCIENTISTMUJEEBKEEXPERIMENT
    @SCIENTISTMUJEEBKEEXPERIMENT 3 роки тому +1

    Very awesome sir aapka project mujhe bahut Achcha Laga☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺

  • @amrittimilsina7099
    @amrittimilsina7099 3 роки тому +1

    Bro, Please make an Automatic Router Inverter using a 7Ah battery that runs automatically with battery power when Line goes off and switches automatically to the line when the line comes back. It should have over charging protection too. Please, bro. I am your regular viewer from Nepal.

  • @gourishankarsubramanian9677
    @gourishankarsubramanian9677 3 роки тому

    Excellent workmanship! Enjoyed

  • @dzbeatz450
    @dzbeatz450 3 роки тому

    Technical Ninja: Pipe, you should become.... ( anything you could imagine)
    Pipe : Yes, master

  • @alexalbertfernandez2721
    @alexalbertfernandez2721 3 роки тому

    Master mind ho ap Kamal kerdya apne all video very beautiful 🙏

  • @jlife7637
    @jlife7637 3 роки тому

    wow!!!! It's a nice, neat and cute speaker. You can put it in your pocket. Best

  • @THEG-DIY-IN-BLOOD
    @THEG-DIY-IN-BLOOD 3 роки тому +8

    No need of your voice man 😁

  • @lifehacksbd710
    @lifehacksbd710 3 роки тому +1

    i love the design, its too good!!!!!

  • @yugnimbone183
    @yugnimbone183 3 роки тому +1

    Bro par aapki har video acchi hoti hai vaise hi ye bhi video acchi thi

  • @tajriyanrahman001
    @tajriyanrahman001 3 роки тому +1

    Really bro your hands are perfect

  • @jitender325
    @jitender325 2 роки тому

    Bhai apne dai gram bohat ache se banya hain thanku bhai

  • @sujalkumarvishwakarma1756
    @sujalkumarvishwakarma1756 3 роки тому

    Finally mouh to khola aaj bro 😛😜😘

  • @powertech6176
    @powertech6176 3 роки тому

    wow very mini speaker and portable i like your videos and didnt miss any video

  • @hassanamin6879
    @hassanamin6879 3 роки тому +2

    Congratulations for 300k subscribers
    Btw luv from pakistan

  • @atharvaschannel6242
    @atharvaschannel6242 3 роки тому +1

    🤩🤩😍🤩😲wow👍😍Amazing bhava tu please🙏🙏 how to make a car 😅 banav please🙏🙏🙏🙏

  • @aryanagrawal469
    @aryanagrawal469 2 роки тому

    Bro I support you , you have made a very amazing thing well you are really the king 👑 of pvc pipes

  • @benten4532
    @benten4532 3 роки тому

    Realy you are a king of pvc pipe

  • @Sarita00
    @Sarita00 3 роки тому

    Your all exprinment are great😉🙃🙂🥳🤠🤯🤯🤯😎🤓

  • @imranofficial_2x
    @imranofficial_2x 3 роки тому

    Very good good making

  • @atekanbarut
    @atekanbarut 3 роки тому

    Awesome 👏 u must rename "PVC pipe Ninja" 😁😁😁

  • @AANANDMOTIVATION
    @AANANDMOTIVATION 3 роки тому +1

    Amazing bhai
    #aanandmotivation

  • @deepaksahani1400
    @deepaksahani1400 3 роки тому

    Bhai tum diy ke king ho

  • @atharvaschannel6242
    @atharvaschannel6242 3 роки тому +2

    Bhava 🙏please🙏 make a rc car 😅😅pls me atharv from Malegaon...

  • @sujaysaswade4907
    @sujaysaswade4907 3 роки тому

    Finishings is awesome

  • @Shyamkumar-di5fu
    @Shyamkumar-di5fu 3 роки тому

    Nice man!!!!!
    Your pvc creations are look very nice...

  • @sefatjahan1234
    @sefatjahan1234 2 роки тому

    You are ginius🥰 i live in bangladesh

  • @TechBihandu
    @TechBihandu 3 роки тому

    It's better you connect it with simple transformer module and the speaker. Because you can hear only left Speaker sound from it. If you connect transformer, you can hear the both of left and right combined. It's a simple idea.

  • @texnotv43
    @texnotv43 3 роки тому +7

    👍👍👍

  • @robomanrobo6777
    @robomanrobo6777 3 роки тому +1

    Great video! Cool using Pvc

  • @maulishete6753
    @maulishete6753 3 роки тому +1

    Pvc pipe and technical ninja never end lovestory

  • @phenomenalconceptandresear1242

    Thanks a lot kind information ji.

  • @noob-up4ru
    @noob-up4ru 3 роки тому +1

    Best out of waste pvc.

  • @yogeshini.c8517
    @yogeshini.c8517 3 роки тому

    U r channel changed bro I am very happy 🎉👍

  • @technicalsubham2818
    @technicalsubham2818 3 роки тому +4

    👍

  • @lovedream5887
    @lovedream5887 3 роки тому

    Khatarnaak 😱😱😱

  • @shoaibmalik4934
    @shoaibmalik4934 3 роки тому

    Duniya hila di

  • @afkkane2721
    @afkkane2721 3 роки тому

    Good job 👏 🔥from 🇸🇳

  • @deepaksahani1400
    @deepaksahani1400 3 роки тому

    Poore you tube pe itna achha design nahi hai

  • @tienngyen6482
    @tienngyen6482 3 роки тому

    Beautiful kitchen

  • @omarmohmmed
    @omarmohmmed 3 роки тому +1

    جميل جدا ورائع
    بارع في الابتكار

  • @happyexperiment2150
    @happyexperiment2150 3 роки тому +1

    Very nice interesting bro😍🥰😘 . I have not time to see our video, I went to school.

  • @JaviersDIY
    @JaviersDIY 3 роки тому

    Nice idea its a mind blowing

  • @1ksubscriberswithnovideo398
    @1ksubscriberswithnovideo398 3 роки тому

    Love form 💓💓💓💓💓💯Bangladesh

  • @Geniusinventor
    @Geniusinventor 3 роки тому

    Next make a speaker with 6.5 inch drivers and make it stereo speaker system. Good luck

  • @bvkstha4944
    @bvkstha4944 3 роки тому

    Lol.
    He shakes everything twice. Haha

  • @yuvrajsinghchundawat3133
    @yuvrajsinghchundawat3133 3 роки тому

    Please make a video on home theatre system

  • @MrDevCreators
    @MrDevCreators 3 роки тому

    Good

  • @gauravkumar67849
    @gauravkumar67849 3 роки тому

    Design is so nice

  • @shubhamwatwatekar2404
    @shubhamwatwatekar2404 3 роки тому +1

    Awesome bro ❤️

  • @niteshmishra3381
    @niteshmishra3381 3 роки тому

    Bahut acchi vdo hai

  • @brawlstars64699
    @brawlstars64699 Рік тому +1

    Nice cutting 👍👍👍🥳🥳🤩🤩

  • @B4TAMILTECH
    @B4TAMILTECH 3 роки тому

    Amazing Bro👍👍👍

  • @creator_infowiseway
    @creator_infowiseway 3 роки тому +1

    Thanks bro

  • @hqgprojectofficial
    @hqgprojectofficial 3 роки тому

    WOw Awesome 💖 keep it up

  • @hirenparmar_electrical.556
    @hirenparmar_electrical.556 3 роки тому +3

    Bro I am first...plzz try to reply

  • @SahilKhan-hg4eq
    @SahilKhan-hg4eq 2 роки тому +1

    Bro bass ke liye hole speaker ke side mein de ya speaker ke back mein

  • @charlesjulius5671
    @charlesjulius5671 3 роки тому

    WOW!!! 👍👍THAT'S AWESOME! (and cute)

  • @musicalkhushal6220
    @musicalkhushal6220 3 роки тому +1

    God job 👍👍👍👌👌👌

  • @fousianias4736
    @fousianias4736 3 роки тому

    😁😁😁from kerala sooooooper

  • @solidsnake5108
    @solidsnake5108 3 роки тому

    very nice invention bro well done

  • @colourcat3635
    @colourcat3635 3 роки тому

    Nyce design..

  • @anuttarjain2293
    @anuttarjain2293 3 роки тому +1

    Wooow nice idea❤❤😍😊

  • @avatarnigam5024
    @avatarnigam5024 3 роки тому

    Good Looking bro

  • @rahulkalra2126
    @rahulkalra2126 3 роки тому

    Excellent .. Bro .. well just 1 request .. could you make a slight change to your casing .. suppose something goes wrong with this speaker(ex battery becomes faulty) .. so it would be great if this casing has screws (i mean the white color covers that you made .. it would be great if you could add some screw mechanism .. so that the casing could be opened and closed multiple times with ease) ..
    Thanks for the video
    Regards
    Rahul

  • @assaineindustries
    @assaineindustries 3 роки тому

    Great work bro

  • @arrohigaming6644
    @arrohigaming6644 3 роки тому

    Bhai aap koi bhi video banate Ho Jo wiring ka thoda matlab achha se dikhega samajh mein aayega please bro love 🥰🥰🥰👍💌

  • @vikas9073
    @vikas9073 3 роки тому +1

    Nice video sir 👌👌❤️❤️❤️

  • @shivshankar6252
    @shivshankar6252 3 роки тому

    Bro it is very important to add total cost of making items . 🔥🔥🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️❤️❤️❤️❤️

  • @gauravmahindrakar2735
    @gauravmahindrakar2735 3 роки тому

    This is very nice video
    Please make a sholdring iron

  • @abhisinghmagdhi2
    @abhisinghmagdhi2 3 роки тому

    Sir ye jo aap blutooth module aur charging module kaha se mangwate hai

  • @narendramankame7967
    @narendramankame7967 3 роки тому

    Great sir....

  • @elizeusoaresdasilvssilva6500
    @elizeusoaresdasilvssilva6500 2 роки тому +1

    Muito bom .

  • @raminventedtech3556
    @raminventedtech3556 3 роки тому

    Super bro....

  • @indianindustryelectronic5980
    @indianindustryelectronic5980 3 роки тому +2

    Nice 😍