Replace Washer Fluid Hose to FIX Washer Fluid Not Spraying - Shown on 2007 Silverado 1500 Classic
Вставка
- Опубліковано 5 сер 2024
- Is your Silverado Washer fluid not spraying? My Silverado washer fluid hose was damaged at the T between the two wiper blades by rodents (they chewed it) which caused the issue of no spray reaching the nozzles. In this video, I run through how to remove the cowl and replace the washer fluid hose with a new part. The trickiest part was the Silverado wiper arm removal. These were stuck on pretty good! You can also see all the evidence of a rodent nest that was built under the cowl in the duct for the AC.
#Chevrolet #Silverado #WasherFluid
New Washer Fluid Hose:
amzn.to/3OPn7tu
www.oreillyauto.com/detail/c/...
www.autozone.com/ignition-tun...
Hope you enjoyed this video! Toss me a like and subscribe at the link below.
ua-cam.com/users/HotSauce...
Chapters
The Issue 0:00
Removing the Cowl Part 1 1:33
How I Removed the Wiper Arms 2:08
Removing the Cowl Part 2 4:14
The Damaged Part 5:05
Cleaning up the Rodent's Mess 5:52
Installing the New Hose onto the Cowl 6:52
Reinstalling the Cowl 8:00
Testing the Fix and Outro 11:03
I want to give a special thank you for checking out this video! If you enjoy the idea and content of this video, give it a LIKE and SUBSCRIBE to my channel for tons of updates and several DIY and truck-related videos if you're into those! - Авто та транспорт
Did this fix your washer fluid not spraying issue? Or was it a damaged tank or pump
Instead? Let me and others know!
Thank you for this video! Was having a hard time figuring this one out! Very nice and detailed! Much appreciated.
Thank you so much for taking the time to make the video, it helps a lot.
You're welcome! I'm glad it was helpful 👍
Worked out great thanks
Nice job!
Same for the Avalanche. Thanks.
Thanks for the content my 07 classic doesn't spray from passenger side and I think this may be the issue hopefully no mice nest 😂!!
Hopefully! They really made quite the mess in mine 😅
This video also applies to 2003 GMC
I have a stupid question here, but where does the windshield fluis drain through after spraying? Mine come out through the driver’s side bottom corner of the fender. Is that fine?
There is a drain in the bottom of the plenum…it’s also where all the rain water drains out. If I’m not mistaken, the drains should be on both passenger and driver sides…near the fenders just as you observed.
What was the part number of the kit and would it work for a 2007 GMC Sierra WT
If it's the classic body style with the oval shaped headlights then it should. Don't know about the new body style with the more square headlights
What was the exact part number you ordered ? I need the same one ! Great video !
I ordered a Dorman 924379 Tee to Nozzle hose I believe. That should work for 2007's on the GMT800 platform. For the GMT900 platform also introduced that year I'm unsure.