It's great the way you lads just get out the grinder and do it! No meetings, no 'it won't work' attitudes, no asking permission from some bureaucrat - respect from GB!
Because your focused on '' your '' own little world, and when your little Ponnie face gets excitement in it's pant Pony start think the whole world is watching * Just kidding
If you can get that to run even for a short period, it will be a blast! I can't imagine the Lada parts being able to withstand the weight and power of that monster motor. Mike
@@1SqueakyWheel Oh. I had no idea. That stinks. I am glad it is a fun pun though. Thanx for replying. I had no idea my lil pun thing didn't translate. Thanx again for the reply. Also I love your name. It is creative 🙂
A name could be, "not alota Lada"! As an American with Slavic decent, who is a certified master automotive technician, I think this thing is awesome! I would love to build one as a race car! We don't have these in the states. You guys are awesome!
Hot rod lada! ...I love it! ❤️ ...especially that you kept it all Russian too and didn’t put some SBC or BMW V8 in it. ....call it “V8DKA” or “Capitalist-Eater”
@@FOTON_FOREVER Trump needs to get on the phone with Putin and see if we can trade Dahm (plus cash,of course) for these guys. They would have that 13b swapped in a day and drive it home at 5pm.
There should be a like on this channel for almost every view. They invest a lot of time doing these video's and so much quality on the productions and translations!
Music is always kick ass on these garage 54 videos. sometimes i gotta jump on the mute button, for allot of videos, but these russians have such cool music
Why do these guys only have 198k subs?!?!? They should have 10,000,000. The shit they do for fun and pleasure and to amuse us is great! Would like to come over there and spend a week or 2 in the garage helping out;
There is so much skill in display here 😱😎 goes to show that you don’t need a fancy workshop and a team of 10 guys!! Not sure how the rear axle will hold up though 😬😂
Ihr habt tolle Ideen und es läuft auch gut . Das Finnisch müsste noch verbessert werden . Der Siel Motor braucht eine Hutze und die reifen von Siel müssen hinten drauf Ansonsten bin ich begeistert von den Ideen . Weiter so .!!!
Yeah just like with the lada engines. But i think there is something going to be too much if you put multiple truck engines on this. Either the torque twists the whole body, or the diff or driveshaft or clutch explodes, or the insane weight of multiple truck engines keeps the thing standing still.
To make the prop shaft as straight as you can, clamp a piece of 50mm or 75mm angle iron to the shaft then tack weld it. Rotate it, clamp it again and make another set of tack welds. Remove the angle iron and fully weld it. This will get it close enough. LOL
driveshaft is more used on FWD cars...usually on RWD you say Propeller shaft or propshaft.... and i looked it up in case i was wrong because i dont even speak English www.quora.com/What-are-the-differences-between-a-propeller-shaft-and-a-drive-shaft
@@gagepuffinbarger6939 dude a transaxle car is a car with front engine but gearbox mounted on the rear like the porsche 924 and 944 or the volvo 340...you are confused... on a fwd car i have heard people call driveshafts, cv axles or cardan axles...on rwd cars i have always heard people referring to the propshaft by its name: the propshaft.... making a google search by "propshaft america" gives many results for example this: www.hitachi-automotive.us/Products/oem/DCS/PropShaft/index.htm
Hugo B. A front wheel drive car doesn’t drive in the back. That’s why it’s called FRONT WHEEL DRIVE. There are no driveshaft. I hope you aren’t a mechanic because if you were I’d steer people away from your shop.
This is one series I never tought I would be impatient to wait till next vid hahah
He is nuts! But so much fun to watch. And it's cathartic to know that there's somebody out there doing all this dumb stuff FOR SCIENCE!
Great channel.
I agree, but check out Project Binky as well.
C'est juste fascinant!
@Alan hughes he said: and, what did you understand from the Russian language?
Who needs LS swaps when you can Zil Swap 👀
cyka swap
The lavette
@Augden Fischer it being a indrustral engine all of the boost
tears of mother Russia.
Augden Fischer all of it!
This channel is so underrated, great stuff man
Completely agree.
I couldn’t agree more This channel is. Awesome
Khalid I thought you meant that in a bad way haha
It's great the way you lads just get out the grinder and do it! No meetings, no 'it won't work' attitudes, no asking permission from some bureaucrat - respect from GB!
Why is this suddenly the most anticipated build on UA-cam? lol
Because your focused on '' your '' own little world, and when your little Ponnie face gets excitement in it's pant Pony start think the whole world is watching
* Just kidding
The Legend of Zilda ;) Perfect name for this car
Beat me to it, it can be the only name for a zil lada hybrid :D
for real!! i just comented the same thing and read your comment nice !
godzilda
Knowing these guys I think this ZIL Lada is just a warm up for something more ludicrous,
V12 engine from T72 in Shortie Lada.
The next is MIG21 turbojet install
@@kize32 Followed up with the Mig-25 Turbojet install :D
What an amazing job and content. Thanks to the translator too !!!!
Agreed!
Yeah I agree, the translation goes hand in hand with the content. Perfect.
By BMI Russian
yea noone here would be watching if it wasnt translated
Can't wait to see this contraption work 👍
1:52 Safety goggles? What are those? 2:17 Oh, there they are!
But not before we did just enough welding to make us as blind as a 90 year old with cataracts! :D
Safety what?In Russia?
YOU COMRADES ARE SILLY I'M STILL GONNA TACK IT!!!
What about gloves?
Just look away as you’re grinding. It will be ok.
I really like this channel!!!! That young man is extremely talented.
If you can get that to run even for a short period, it will be a blast! I can't imagine the Lada parts being able to withstand the weight and power of that monster motor.
Mike
I think it'll be OK. It'll be under no real load. Should be torquey👍
I don't see why it won't.
Clearly not familiar with Lada engineering...
Now then that could be interpreted either of two ways.
Mike
That Rat Rod shifter screams skull handle.
Yeeeah that would be cool
Agreed!
Maybe a bust of Lennon?
yeah. It's just the skull didnt take off too much on that side of the world so they wont think of it unless they see this comment
From the USA .. I love watching ur shows .. been glued for about 2yrs now
Rly?Very different to USA normal stuff:)
Name should be ladzilla (godzilla)
I like that one!
This one is actually pretty good
Nice!!
Alada engine for a lada
Godzilada ?
Fantastic! The shifter rocks, you need a skull shift knob to make it perfect, lol.
russian engineering in a nutshell . double the power, triple the weight xD
Seven times the torque.
@@TheSqeeek ten times the consumption xD russian engineering, ay? ;)
And zero times safety gear
@@adirompin1727 oh, what do you mean? after all, he did look away when he was cutting using an angle grinder without glasses xD
@@adirompin1727 There's no safety gear in the USSR, they need work place accidents to stop people getting old and claiming state pensions lol
Lad-Zila, Perfect Name
I love the way you customized the shifter. As for a name. Howsa bout "Lada Truck" Or "Whole Lada Car" or "Whole Lada Engine"
It's a fun pun in English, but it doesn't translate well into Russian, unfortunately.
@@1SqueakyWheel Oh. I had no idea. That stinks. I am glad it is a fun pun though. Thanx for replying. I had no idea my lil pun thing didn't translate. Thanx again for the reply. Also I love your name. It is creative 🙂
It's not quite so creative as yours, but I get by somehow. :-)
Zillada (name subject to change)
A name could be, "not alota Lada"! As an American with Slavic decent, who is a certified master automotive technician, I think this thing is awesome! I would love to build one as a race car! We don't have these in the states. You guys are awesome!
This is absolutely insane. You guys are all insane. I love it. Keep being insane!
4.5 Billion years has brought us to here.
Totally worth the wait!
LADAZILLA. The best nickname for this project
Zillda:)
More like vladzila
Zila da is the perfect name for this build.... Love your work guys...
This is one of those videos i like before i watching it😂✌👌👌👌
The best name would be Zilada
Ladzilla
Zilda*
space the rack closer to the bottom of the subframe.
1/2" spacers all around the subframe. Lowers the engine. More wheel travel too
Go Ivan!!! You a miracle worker..
Name? "Ivans Nightmare"
You know it's going to steer just fine with that impreza rack!
If those ghetto link welds hold up under all that bouncing weight! ;-)
If they can't steer it'll make a bad Imprezzion on a wall somewhere.
Great work guys!! I really enjoyed watching this.. Thanks also to the translator for letting us also enjoy the work these guys do.
Hot rod lada! ...I love it! ❤️ ...especially that you kept it all Russian too and didn’t put some SBC or BMW V8 in it. ....call it “V8DKA” or “Capitalist-Eater”
i like “V8DKA”!
Just subscribed. I really love how you guys do the things everyone else says is impossible. Fantastic effort!
This thing will gap Rob Dahm's rotary Corvette swap.
I was waiting to see Rob Dahm get mentioned here :D was not disappointed :)
@@FOTON_FOREVER Trump needs to get on the phone with Putin and see if we can trade Dahm (plus cash,of course) for these guys.
They would have that 13b swapped in a day and drive it home at 5pm.
The Legend of Zilda. Thing is a little monster! Can’t wait to see it smoke the tires off.
Call her Widowmaker, because that's what this lada is!
No its Mustang:)
There should be a like on this channel for almost every view. They invest a lot of time doing these video's and so much quality on the productions and translations!
ZiL plus Lada = Zilda. The Legend of Zilda ...or Zilda, The Adventure of Steering Link
My suggestion was 'Crankenstein' but the Legend of Zilda def got a ring to it.....
Music is always kick ass on these garage 54 videos. sometimes i gotta jump on the mute button, for allot of videos, but these russians have such cool music
"Serhat Durrmus -Elimi Tut". If any of you were wondering :) *flies away in russian*
In Soviet Russia Engine swaps you.
Haha beat me to it!
Typical..
godly conversion, get it done boys. we are all cheering for you
Name of car;...GodZila!
Or "GodZilLa(da)" ;-))
@@toycarcrush That's a good one,@
@@toycarcrush godZILla(da) :D
You win hands down. That's perfect. If he doesn't pick this name I'm gonna unsubscribe. (Maybe.)
You guys have the craziest fabrications!! Love it
That car is definitely a Frankenstein. So, go with Ladastien!
Zilda .the car needs somthing simple because nothing on this project seems simpel . at least the name can be , your a wizard!!!
100hp 7 liter truck engine! nice!
@@roope.t.5251 yea 190ftlbs at 2100rpm
12OclockLow no they didn’t but going by the single barrel carb it can’t be making over 100hp no way
@@12OclockLow I see! maybe it is 180hp that will be awesome!
This channel is the best random find on youtube for me
How about Lada Zilguli?
you should stick he exhaust through the top or the sides, that would look really, really cool!
I love these videos kee up the work
Big bertha is coming along nicely and I can't wait to see her drifting like Colin furzes drift trike.
Call it what it is DEATHTRAP, Lol
Why do these guys only have 198k subs?!?!? They should have 10,000,000. The shit they do for fun and pleasure and to amuse us is great! Would like to come over there and spend a week or 2 in the garage helping out;
Couldn't click fast enough
Yes?
What happened
Safety squints engaged!
Who else wants to see garage 54 and hoonigan team up on a build
i cant wait to see this thing drive and you do your gear changes! Daaaaam, that gear stick!!!!!!!
Well that’s all good and well......but how many cup holders does it have? 😂
There is so much skill in display here 😱😎 goes to show that you don’t need a fancy workshop and a team of 10 guys!!
Not sure how the rear axle will hold up though 😬😂
Install BMW E34 headlights with angel eyes please make it a killer!
E30 headlights would look cool
Really?
Angel eyes, the official mod of the 18yo bimmer ricer boi
The best macgyver stuff on UA-cam!
But the real question: will it fit in my civic?
да - (Russian for yes)
In Russian every Engine will fit your car
Epic. Big fun creating = big fun viewing. Keep it up guys !
1 week later We put a second Zil engine in out lada
Haha! Jeez now that would be really something!
Why do I love these videos so much?!?!
'Excessive' horsepower? No such thing!
Ihr habt tolle Ideen und es läuft auch gut .
Das Finnisch müsste noch verbessert werden .
Der Siel Motor braucht eine Hutze und die reifen von Siel müssen hinten drauf
Ansonsten bin ich begeistert von den Ideen .
Weiter so .!!!
My suggestion for a nickname for the car is "Overkill"
Utter lunacy. Love it!
Try to put IL-2 engine in lada next time blyat:-D
Lol, you'd have to put the seats in the trunk.
Yeah just like with the lada engines. But i think there is something going to be too much if you put multiple truck engines on this. Either the torque twists the whole body, or the diff or driveshaft or clutch explodes, or the insane weight of multiple truck engines keeps the thing standing still.
True hot rodders at heart take what you have and make it work guys its about using what you have at your diposal
Looking good. Really impressive engineering. Call it The Beast of Belgorod.
Brilliant build . Really enjoying it 👍
Checked all your video titles. Subscribes without second quess, I'm pretty sure I'm in for an informative and fun ride.
The driving position looks sick
Amazing job fellas 👍👍👍can’t wait to see it drive !
Lookin' good, your 'Lada' gear shifter so reminds me of something in a modified 1931 American Ford or 1932+ Russian Model B
I can feel my eyes getting further away from each other after watching all the videos in this channel.
Excellent work and engineering. Am looking forward to what happens next and when the car is going to be driven.
Love the videos. You guys are very talented and experienced with All of the work you do. Cant wait for lada with 2 truck engines.
nice seeing him enjoying his work 6:40 ++ !
:)
Damn cool! From 0-100 km/h in 4th gear!
love the videos keep them coming. l am a mechanic have been for 50 years i will be watching . les state of maine usa
6:53 hes pleased with himself aha. good shit lad.
I'd call it the "hangover", because the engine hangs over the front and you had to been drunk to think of this.
great job, you vids are not only interesting, informative on your soloutions and problems but very entertaining and funny THUMBS UP :)
To make the prop shaft as straight as you can, clamp a piece of 50mm or 75mm angle iron to the shaft then tack weld it. Rotate it, clamp it again and make another set of tack welds. Remove the angle iron and fully weld it. This will get it close enough. LOL
Propshaft. Here in America we call it a drive shaft
driveshaft is more used on FWD cars...usually on RWD you say Propeller shaft or propshaft....
and i looked it up in case i was wrong because i dont even speak English
www.quora.com/What-are-the-differences-between-a-propeller-shaft-and-a-drive-shaft
Hugo B. That is not right. Out of all my years I’ve never heard that. Fwd cars use a transaxle and cv axels. No driveshafts what so ever
@@gagepuffinbarger6939 dude a transaxle car is a car with front engine but gearbox mounted on the rear like the porsche 924 and 944 or the volvo 340...you are confused... on a fwd car i have heard people call driveshafts, cv axles or cardan axles...on rwd cars i have always heard people referring to the propshaft by its name: the propshaft....
making a google search by "propshaft america" gives many results for example this: www.hitachi-automotive.us/Products/oem/DCS/PropShaft/index.htm
Hugo B. A front wheel drive car doesn’t drive in the back. That’s why it’s called FRONT WHEEL DRIVE. There are no driveshaft. I hope you aren’t a mechanic because if you were I’d steer people away from your shop.
These are real mechanics 😂👍
This series is great. I do want to see an LS Swap a la Sloppy Mechanics though.
Yes, yes, yes, waiting to see that driving!!!
Absolutely awesome!!! 😁 please keep'em coming friend love your ideas!!
CANT WAIT FOR THE BUMP STEER!!!
I love seeing what they come up with next . Poor Lada. Need a little more support on steering shaft . Name for car , ALOTLADA
seriously you got some good lads there.
Thats dope AF, it looks like something from madmax
This project reminds me of someone putting a International truck V-8 into a Chevy Vega!!!
I love the stuff you come up with.
How are you guys not a a million subscribers yet?!?!
their real channel is in russian and it has more than 2M subscribers
ua-cam.com/channels/BByzLy3MGJT8UMVLYLScNg.html
It is good to have fun. A big man's sandpit. Enjoy.
I wish I had this guy growing up