2005 Mercedes C230 Kompressor W203 Rear Shock Install
Вставка
- Опубліковано 5 вер 2024
- Get rid of those horrible blown out rear shocks. I will show you how to install new rear shocks. Im installing a set of Bilstein's. Purchased from Pelican Parts.com.
- Авто та транспорт
Thanks for sharing this video. I used the information in it to replace the rear shocks in on my 05 C230. I made one change in your procedure. I jacked up the rear of the car by placing the jack under the differential. I then placed jack stands under the jack pads before I removed the wheels. You are correct that compressing the shocks to remove them takes quite a bit of force and I think that was the toughest part of the job. I used a tie rod separator as a lever to press down the shock most of the way and brute force to move it the last half inch. I saw several videos in which the technician placed the car on a lift. This seems to allow the technician to exert more force on the shock because they are in a standing position and can approach it from a more beneficial angle. When I installed the new shock, I used my jack to push it upward and then slid it into position on the control arm.
Your welcome! Thanks for sharing your experience and watching the video! Great work!
nice video Thanks
Your welcome! Thanks for watching!
People wonder why I charge so much. I tell them to do it themselves and call me when they get stuck.
Would've/Could've/Should've been easier just top SLOT-CUT the Interior Panels around where you need to simply get a Wrench into/onto the top strutt Nut.
Sure but the point is to show how to do it correctly. 😂