Is the Vale GT1 the ULTIMATE CHEAP SUPERCAR?
Вставка
- Опубліковано 25 вер 2022
- Hailing from Northern Ireland, the Vale GT1 Boxster Re-Body kit transforms the cheapest Porsche into the prettiest supercar. Taking inspiration from legendary longtail LeMans racers, the Vale GT1 features an extra-wide widebody, Macan taillight bar, and functional roof scoop. Is this Porsche 911 GT1 homage a good DIY supercar kit for a tight budget? Watch to find out whether the Vale GT1 is the best cheap supercar of 2022...
NOTICE: Clips used from other videos are fair use and fall under U.S. copyright law because this work is transformative in nature, and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse UA-cam’s copyright claim tool. Copyright concerns and takedown requests can be submitted to: quickshiftcarreviews@gmail.com
🔵REMEMBER TO LIKE AND SUBSCRIBE🔵 - Авто та транспорт
My god this is EXACTLY what the car industry needs.
The car industry needs a fiberglass kit car?
Are you serious buddy? Or is that sarcasm?
Saving for one
@@juanesteban8827never before seen lmfaoooo
Definitely better without the fin. I'd rather have a more conventional wing on the rear
Yes sir your onto it. Bit if some guy wants to crank it up I reckon that fin may save his life ! Hopefully. But fat without the fin suits me.
@@stevelee5724 for sure if you're gonna stuff a few hundred more hp under the bonnet and track the car, then yeah. But as far as a stock or even tuned boxster engine goes for the street... I'll pass on the fin. A cool cantilever wing would be hot though
Stick a fucken custom Jesko attack wing on it. Make the downforce absolutely insane.
Why not both?
Big WANGS
@@FurryestX if it was tied into the rear wing like on the LMP cars, then maybe. I'd have to see a rendering of that before i would commit to the idea though
I actually liked the fin a lot. Not sure what about it was controversial but I’d definitely would want it if I did a build with this kit.
For sure. I'm not a Porsche guy - I see the appeal but I wouldn't stand in line for it - but that model is just *chef's kiss*
Personally, with the fin add a wing on it and it would be perfection for me
@@frostbytes8906 I completely agree.
Maybe it was for security reasons. Like if you have an accident you could slice a human in half. But I am not sure if thats the case. There must have been a legal reason.
Side note; I seriously think they should make another 911 GT1. Hands down their best looking 911 from the 90s.
Great looking kit with or without the fin! Nice design 👍
nah
@@kaz8103 yahuh!
can only imagine the kit like a cheap jigsaw cut with a chainsaw
Different style of video from your normal ones but I liked it.
Thanks for letting me know about Vale. I live in the UK and haven’t heard of them before.
1996 GT1 = G.O.A.T.
Man, I would love to have that Boxster body kit. I wonder, would it be compatible with the 982 chassis....
Probably not, but your best bet is to ask them. They are probably aware of why it's not compatible and if it can be done with some extra elbow grease.
They state it can be fitted those models: 986, 981, 987. I believe the 981 is not so far away from the 982. But if you ask them, they will tell you.
Respect bro. Killer video. 30hours to knock out a 8 minute vid is more patience than I've had in my collective 47 years of being on this planet kudos to you good sir. I wish you success
Nice Bodykit with the Fin!
The Fin makes it look Cool!😎👌
To keep a close to factory weight distribution the K20 or STI swap would be the best 🔥
I think I found my next project, I already have a few ideas for the performance aspect for it and I think I'd want it in black metallic or frost white
One minute into the video and I already love this guy
Nicely done, and thanks for bringing this to my attention.
Thanks for yet another excellent video/history lesson. I LOVE IT!!!!!
Man I knew this was going to be the next video. Called it.
Dope video as always 💯
Great video!!
The new GTS 4.0 is the ultimate sweet spot in the porsche line up
the new format is amazing, it gave me giggles and nice information. 10/10 would get tricked again to watch your video
I might have the Porsche bug again...i dropped a v8 into my last 911...now have seller remorse, this kit is inspiring.
I like the fin it looks way better and it will stop people from putting insane drag producing wings
That rear piece should go to a wing 🔥🔥🔥🔥🔥
I literally liked your video the second you called me on watching the entire video!!!! Maybe if you didn't make such a good video, people wouldn't watch it so much. Did you ever think about that???? Probably not. Keep up the great work. I really enjoyed it lol
i was able to witness the very beginning of the project a few years ago. one guy worked on the physical body kit for over a year
Great video man ove the content
OMG the Tamagotchi! 0:39
had to subscribe after this guys delivery
Entertaining script and Good editing!
I actually really liked this video
I had to subscribe fam..”you know what else is red”😂😂
I never fully watch a video from a car channel that I have never seen, but this guy has the donut media type charm.
great look
It look awesome mate
Subscribed because I like the memes
Ive been following their project for a while.
The Vale really looks like a Pfister Comet.
I kinda like the fin. Looks exotic. Maybe designed a little smoother looking.
You got the sub when I saw the sienna next to the bugatti
Love your jokes and the contents not bad either. LOL!!!!
7:58 ok ok subscribed!!
Tho you got me since "you know what else is red? The subscriiibe bottom..." XD
Good content mate cheers.
Great vid lol
I don't consider myself being trolled when the info is solid
Finally I can create the barra powered supercar of my dreams
With the fin! 💯
I LOVE the 993 Carrera 4S. It's even better in resto-mod. Porsche rulezzz
When he started yelling, I felt that
Great addition for a Boxster. Maybe a more powerful Subaru 6 swap. Seems to be popular with everyone on a budget. Don’t like the fin but agree a good wing would look awesome.
OMG had my tv system on loud and watching this vid then at 6:31 made made my heart skip a beat!!!😂
TROLL? I love Porsche/AUDI! This was a nice lesson on Homologation... i have a Honda RC51.. ISLE of MANN TT Race bike through Homologation.. And its EXCELLENT!
The Fin is sick
OK
NOW im saviing money for this
And you know what else is red! ❤
The first Boxster was slower than you can imagine. I drove one back in the day and my (then) stock RX-7 would smoke it stupid. And it wasn't just at the redline, it was all across the power band.
This car, to be done properly would likely cost more than both a kit from Factory 5 (assembled and ready to rumble) or a nice stock Cayman, which looks 100 times better than this, it is actually a 100% Porsche and has a mid engine and a decent performance. I don't see it going anywhere. But I'm sure some will give it a shot.
A lot of LS swaps would probably take place lol
@@rashodreed233 Ask me why I would buy a Porsche if I long for a Chevy... Buy a chevy.
@@giosimfra64 I don't think you understand lol
Don't know about your imagination. Can only say I own a few Porsches. I was recently offered a 2.5L 986, cheap as chips, so couldn't resist adding it to my collection, as I didn't have any drop-top. It's not slow at all, it's a very decent car.
@@rashodreed233 This is interesting. I think the only person who doesn't understand is the one who does this and the one who wants it. But to each their own.
Was wondering why Porsche would come out with that kit car looking design, now it makes sense
brooo you caught me so off guard 🤣
🤣 I'm glad I listened to the end 💸
I'm wondering how that would look with a targa top. Maybe a 2-piece top might even fit in the front boot. ...if not a corset-ribbed soft top could be rolled up and easily fit in the rear boot.
Me with wife, two kids and mortage watching this at 3 am
The fin is awesome
That could be the next generation of F40-Fiero!!
with the fin, ONLY if they had a big wing that connected its visually with the rest of the car
Fin an absolute yes option
Hello did as you asked, and I appreciate the history lesson. Next, how about doing another video on this kit, re purposing a boxter could be quite the thing if truly available.
I didnt mind being trolled. I love the 911 GT1s. And would love to own one oneday......as well as a McLaren F1.
I disliked when he went on about how he click baited us but then liked it when he said “get trolled”😂😂😂
WITH the Fin!!
Can I get a list of your dealers in the US so I can pick the one closest to me to install my Vale GT1. Thanks
Have you got a follow-up... with someone's project build? And... do you have any video of the new body kit doors, especially relating to ease of entry/exit?
Most Def'..!!! 🤔 With the 🦈 *"FIN"* 🦈 man..!!! 😎💯👌
7:23 That's okay, because I always wanted to find out about the 911 GT1.
They need to make this kit for the mr2 spyder.
For Valet Parking stunners
Definitely an enthusiast car.
What is enthusiast?
when I was young when project gotham racing came out with the Xbox, I would always call the Boxter "The Kissy Car" because it for some reason in my brain looked like a kissy face from the rear
:) enjoyed the history lesson lol
@Quickshift Cars
is it possible you could make videos on affordable (power pact) production cars that are out and are coming soon. (example: new ford mustang, new dodge muscle cars, GR corolla, etc...)
edit: If not on this channel, on a second channel with your narration over the video.
with the fin!!
That kit with a ls swap is a no joke car.
No pinned comment with a link to their site? Not mention of the site in their description?
I own a Toyota mr2 and put about $3,500 in it.
300 hp turbo engine, new axels, new break system, new bushings, new suspension.
You don’t have to go buy something new to have a little fun.
nice
how much weight does this kit put on the car?
Interesting to have a bodykit conversion for a Boxter of all things.
Iff you can rebody an early boxter i think making one look exactly like the show car they,de have a winner
Mclaren F1 was designed as a road car and had no desire to race till every owner said let's go racing in it
That end was what pushed me to sub, seeing a hypixel skyblock meme also helped (???)
so how do you deal with the old engine with high mileage?
It was clickbait. But your fn hilarious bro
Thumbs up 👍🏼 yer arseseees
With the fin for me
seems fun but is it road legal?
I liked the "European units" for price comparison. Lol. So in Canadian it will be around $17,500 which is a cheap enough buy in for a car that for not much more money spent building it compares favorably to lower end supercarsbin looks and performance.
I mean, you could really build an exotic supercar for like 50,000 $... depending what you want to do. I would also upgrade the interior.
Kinda cool !
I was looking for any cheap 911 even there any egg headlight type, finally thought down to a Boxster and then I found a BMW Z4 on it by here pay here lot. It was wrecked out, but once I realized what the BMW Z4 was and how much they go for yeah… Much more practical less weird Breaky stuff and still gets the looks
The BMW neither sounds nor handles like a Porsche!
Definitely looks better without the fin.
god i love the memes
Looks like that Porsche from GTA5 at the front
And I like that you 'tracked me ' but that setup with 3.8 or 4.0 would not suck ! Ay bro....
Cool video 😎 I hope Vale sell a replacement dash to replace the awful Boxster one! 😖😅
Finless is definitely better. The fin screams "tacky kit car", and spoils a beautiful body 😊
I've subscribed! 🥳
CanI get a list of North American Vendors to send your parts and my car? ( installing and painting )
Thanks
WITH THE FIN!