Wow, I know this is a little older video but there are not too many videos that I actually save to reference later, great info, you are clearly a resourceful person, I don’t think I have ever seen such a budget friendly swap like this one before. 👍
Appreciate that! Just trying to be realistic and help out! I do have another video getting deeper into it. ua-cam.com/video/yRU95iRCGBY/v-deo.htmlsi=OLpszR3CesO0ahlN As well as I just started LS swapping a 1986 C10. ua-cam.com/video/siP1qqHbqwo/v-deo.htmlsi=e6soia06bOXtbd-e
THANKS FOR WATCHING AND DON'T FORGET TO SUBSCRIBE AND HIT THAT LIKE BUTTON! 👍UPDATE ON WHAT IT'S LIKE DAILY DRIVING THIS CAR AND HOW I GOT THE ENGINE: ua-cam.com/video/ADkpYX2hYwc/v-deo.html
ua-cam.com/video/yRU95iRCGBY/v-deo.html check out my other video. It's a little more descriptive. The only wires I used from the stock harness were the alternator wire, starter wires, then the old distributor wire (believe it was brown) for the "key on" wire. But it will be different from car to car, so Hope this helps! I don't mind answering any questions!
what did you use for the oil pan? i have a 5.3l out of a 2002 silverado and im looking for the right oil pan kit to fit so it doesnt hang as low from what ive heard
@@tristantheblaze9756 very nice! I am using the stock truck oil pan, but I do not recommend that. It's about 2" lower than the subframe. Meaning if I run over anything the pan will hit it first. Ive read that the 98-02 f body and I believe the Hummer pan works great on the f body's, if you're looking for a budget pan. Holley also makes a 2nd gen f body ls swap pan. Believe that one is around $400-450. As long as its a rear sump pan unlike the gto pan which is a front sump, and not as low as the truck pan. With the pan a new oil pick up tube will be needed as well.
I have a tsp pan (top street performance) in my 79 was 300 with the baffel . Basically a Holley knock off . I’d recommend it comes with pick up bolts lam gasket. I did use the f body windage tray . You can use truck tray but have to cut off the front 1/3 of it basically
@KazDolla1 no problem, happy to help! If this helps, I did do an updated video on the LS swap. It goes a little further in depth. Video link is below. ua-cam.com/video/yRU95iRCGBY/v-deo.html
The stock truck intake does not hit the hood unless you keep the evap sensor, then that part hits the hood. Keep in mind, i am using the holley motor mounts with stock frame brackets. Other brands might be better or worse. Also, here is a more in depth video on the swap. ua-cam.com/video/yRU95iRCGBY/v-deo.html
The 4.8 that I have is out of a 1999 silverado. GM specs them at 285hp. Now mine has long tube headers and a tune so it might have 300hp now.... its not fast but has potential.... Most of them come with the 706 or 862 heads which are great heads for porting and on top of that the 4.8's have the flat top pistons which is usually a trend with nitrous applications.... more than what you asked for....
For a more in depth video, I did another video that might help as well. See video link below. Good luck with your swap! You won't regret it! ua-cam.com/video/yRU95iRCGBY/v-deo.htmlsi=jp0oA33tw8d0f4OA
Wow, I know this is a little older video but there are not too many videos that I actually save to reference later, great info, you are clearly a resourceful person, I don’t think I have ever seen such a budget friendly swap like this one before. 👍
Appreciate that! Just trying to be realistic and help out! I do have another video getting deeper into it.
ua-cam.com/video/yRU95iRCGBY/v-deo.htmlsi=OLpszR3CesO0ahlN
As well as I just started LS swapping a 1986 C10.
ua-cam.com/video/siP1qqHbqwo/v-deo.htmlsi=e6soia06bOXtbd-e
AWESOME BUILD! Definitely a “back yard” build. I’m doing an 80 Camaro myself with a 6.0ls. Great job.
Well done fellow 3rd gen enthusiast, I am finishing my 6.0 swap in my 83 Camaro as well, car becomes amazing with the proper HP. Enjoy!
Awesome! May consider this in the future rock n roll 👍
Really cool build, nicely done!
Thank you! It has certainly been a challenge, but fun. Still more work to be done yet!
UPDATE ON WHAT IT'S LIKE DAILY DRIVING THIS CAR AND HOW I GOT THE ENGINE: ua-cam.com/video/ADkpYX2hYwc/v-deo.html
Very nice build. Thank you!!!
THANKS FOR WATCHING AND DON'T FORGET TO SUBSCRIBE AND HIT THAT LIKE BUTTON! 👍UPDATE ON WHAT IT'S LIKE DAILY DRIVING THIS CAR AND HOW I GOT THE ENGINE: ua-cam.com/video/ADkpYX2hYwc/v-deo.html
This was cool and some amazing info as well
Thank you!
Great video, thank you
love it!!!!!!!
A79 with a Pontiac 400 should be a W72 engine. A rare thing.
👍👍👍
What color wires did you use from the firewall bulkhead to get engine running? Ignition, constant, key etc… Thanks, it would really help!
ua-cam.com/video/yRU95iRCGBY/v-deo.html check out my other video. It's a little more descriptive. The only wires I used from the stock harness were the alternator wire, starter wires, then the old distributor wire (believe it was brown) for the "key on" wire. But it will be different from car to car, so Hope this helps! I don't mind answering any questions!
what did you use for the oil pan? i have a 5.3l out of a 2002 silverado and im looking for the right oil pan kit to fit so it doesnt hang as low from what ive heard
going into a 78 trans am
@@tristantheblaze9756 very nice! I am using the stock truck oil pan, but I do not recommend that. It's about 2" lower than the subframe. Meaning if I run over anything the pan will hit it first. Ive read that the 98-02 f body and I believe the Hummer pan works great on the f body's, if you're looking for a budget pan. Holley also makes a 2nd gen f body ls swap pan. Believe that one is around $400-450. As long as its a rear sump pan unlike the gto pan which is a front sump, and not as low as the truck pan. With the pan a new oil pick up tube will be needed as well.
I have a tsp pan (top street performance) in my 79 was 300 with the baffel . Basically a Holley knock off . I’d recommend it comes with pick up bolts lam gasket. I did use the f body windage tray . You can use truck tray but have to cut off the front 1/3 of it basically
What did you do for shift linkage
Stock shifter cable for a 98-02 camaro or firebird
Appreciate it ordering it now
@KazDolla1 no problem, happy to help! If this helps, I did do an updated video on the LS swap. It goes a little further in depth. Video link is below.
ua-cam.com/video/yRU95iRCGBY/v-deo.html
Does the truck intake hit the hood?? I have a formula hood as well and wanted the truck intake but it looks tight
The stock truck intake does not hit the hood unless you keep the evap sensor, then that part hits the hood. Keep in mind, i am using the holley motor mounts with stock frame brackets. Other brands might be better or worse.
Also, here is a more in depth video on the swap. ua-cam.com/video/yRU95iRCGBY/v-deo.html
How much HP does that 4.8 have?
The 4.8 that I have is out of a 1999 silverado. GM specs them at 285hp. Now mine has long tube headers and a tune so it might have 300hp now.... its not fast but has potential.... Most of them come with the 706 or 862 heads which are great heads for porting and on top of that the 4.8's have the flat top pistons which is usually a trend with nitrous applications.... more than what you asked for....
What fuel pump you use?
Walbro 392
Awesome thanks for the video I’m doing my 1980Z28 soon so this helps a lot
For a more in depth video, I did another video that might help as well. See video link below. Good luck with your swap! You won't regret it!
ua-cam.com/video/yRU95iRCGBY/v-deo.htmlsi=jp0oA33tw8d0f4OA
Hey bro do you have a instagrams so I can ask u some questions