Gun Restoration - Rusted Pistol Restoration
Вставка
- Опубліковано 17 лис 2024
- In this video, we'll be restoring a rusted pistol. This is a beginner-friendly restoration project, perfect for anyone who is interested in gun restoration.
Rusty pistol restoration is a fun and sometime difficult project for beginners. This project is perfect for anyone who is interested in gun restoration and wants to learn the basics of the process. If you're new to gun restoration, this is the perfect project for you!
we'll be looking at how to restore a rusted pistol. This is a great project for anyone who wants to learn how to do gun restoration. We'll be covering the basics of how to remove rust and restore the metal to its original condition. who wants to learn more about gun restoration, or restore a rusted pistol.
This is a 1930 model of Russian Tola Tokarev. This pistol was very rusted and jammed badly.
we did sandblasting to remove hard rust and preparing surface for bluing. hot bluing process was perfect and end results was amazing. hope you will enjoy my gun restoration video.
I knew we had a true professional this time when he pulled out the steel punch and started hammering ithe rear sight to break the slide loose….
Agreed--it was painful to watch--so many needless amateur mistakes.
It’s to be expected from a channel that manufactures restoration situations, just to make videos.
Philippines 🇵🇭 gun
🔥🔥🔥🧔♂️🧔♂️🧔♂️🧔♂️🧔♂️🧔♂️🧔♂️😡😡😡😡😡😡😡😡🧔♂️😡🧔♂️😡🧔♂️😡🧔♂️😡🧔♂️😡😡🧔♂️😡🧔♂️😡🧔♂️😡🧔♂️😡🧔♂️😡🇵🇭🇵🇭🇵🇭☠️☠️☠️ gangster Philippines boy Philippines 🇵🇭 killed
Никакой коррозии, раковин и царапин,этот пистолет рукотворно заржавел.
Проделать такую работу и под конец засадить две царапины, - это талант!
Ты лучше у них спроси откуда они столько ржавых стволов находят ?
@@Mr.Universelвзял исправный пистолет, положил в солевой раствор на время, вытащил, высушил, запилил ролик.
i like video
подозрительно поцарапано, воронение так не царапантся, а вот краска с баллончика именно так
One more gun in water for rust and then, restoration and views...
If I had to guess it looks like he used a warm spray tank of some sort. That way you get the very even rust across everywhere.
@@rre9121or he is actually soaking guns in water for long periods of time to make content.
🎉🎉😂@@rre9121
@@dso-nx3jy yes u can clearly see it was soaked in water deliberately for a short period of time for making this video
100%
Очередная сказка о ржавом оружии
А где он находился в банке кислоты куда сами и поставили или пару дней в солевой ванне ????😅😅
метал прямо в идеальном состоянии , даже пружины))
Это или китай или сербия там предохранитель значит вещь современная не советский 100%
На китайских предохранителя тоже нет
судя по розетке это Азия
@@АлкарСкарлет-п4эм Type 54 китайский,у югославского М 57 флажок предохранителя плоский и рукоятка длиннее
Original TT33s don't have a safety. So you bought a new import and buried it in the garden for a week 😂 That's also the wrong way to remove a circlip It just pops off if you push on the split end. You also just completely fucked the firing pin retention by messing with that roll pin for no reason. Im also rather concerned that you just buffed the sharp edges off the locking fingers on the barrel so now you have poor lock up and a weapon with horrendous sloppy head spacing that could genuinely suffer case head seperation and spit brass at you upon firing.
It's a funny compilation. The safety bottom looks like Hungarian Tokagypt 58 made in Hungary for Egypt in a 9mm pair. 11 in an oval means that the top is a licensed version, manufactured in Poland in "Łucznik" in Radom. The PPS submachine gun (one of 4 places) and AK varieties up to Tantal/Beryl and PM Rack and Grot MSBS were produced here.
TT production in this plant lasted until 1956, the oval logo was minted from 1950. The grips are neither Hungarian nor Polish. They are Soviet with a star. It is not known how this little thing was created, it is not even known whether it shoots.
Amazing gun! It rusted evenly inside and out with no pitting or scaling. And not one small part rotted away or was broken. Russians are using some pretty special steel for sure.
I's not soviet/russian and is not 1930. It is Polish postwar production. Probably mid 1950's.
The barrel is ruined. There is no reason to "restore" it.
@@KavkazKislovodskalthough accuracy might have decreased, the barrel grooves are still intact you can catch a glimpse at 12:48
На пистолетах ТТ предохранителя не было это новодел в Европу и Америку, там это обязательно
Это румынский ТТ.
Румыны, как только получили лицензию, сразу доработали, чтобы поставлять на экспорт.
И разумеется, для себя.
Сам не пойму откуда предохранитель сюда по крупной насечки на затворе эта ранняя версия , какой-то может быть колхоз переделывали их
З@@ИгорьНеделичев
Nope yugo m57 dosnt have it in original state
This TT cannot be 1930s vintage as it has a lever safety !
Предохранитель потом поставили
Абсолютно верно!
Это уже современная модификация...
11 в круге это польское послевоенное производство
they were added to the piece in order to make them legal to import.
Correct 💯
another decrapification by Bubba. Love the blued rust pitting and the punch marring of the new finish!
Expect the part ...where he Rusts the gun ...Then makes a "Restoration Video"
Короче, взяли пистолет. Подержали его под ванной несколько дней в мокрой тряпочке. Теперь видео снимают, как они его реставрируют😂👍
Excellent, congratulations.
Bravo, you made that "Tok" new looking! From the pitiful looking condition that Tok was in when you started to the, almost factory new look, when you finished. Great job sir!
Thank you very much!
wah mubarak ho bi mashallah video uplod ki😊
TT. I grew with this gun from age 12 to 17 very solid and powerfull
except when you lose the piece that keeps the slide release and the slide in place, the lil clasp he popped off
Greetings Sir. Excellent for the class. From Brazil. Mechanical technician. Gunsmith Armorer. Military Veteran. Special Forces. And Police. Lawyer with 9 Postgraduate degrees.
14:40 that's it, scratch up the new blueing. that's how the pros do it.
Seriously…I was thinking the same thing.
BEAUTIFUL
Thank you! Cheers!
amazing collection
of how NOT to do
a restoration
It's funny.. I just watched a video previously how to make something rust - faster.
And next video was this.
What is the chance to find a weapon. Or in this case, a third one...
@@mrsaizo0000 they'll ruin a good one to make more money from youtube
I priced a full scale restoration of a gun my dad got from is FIL, a cool old Winchester pump in .22S. Once the cost hit the $2,000 range I decided it would make a cool decor piece. Makes me wonder just how much money is made on UA-cam, although it’s no wonder you don’t see videos like “vintage Python restored”
@@bullgravy6906depends on how pretty you want it compared to just shootable
Хорошая реставрация. Есть ряд решений, который вызывают вопросы - 1) не использовалась химия для снятия ржавчины. 2) механические нагрузки на детали при разборе, что заведомо ведет к рискам деформации и повреждению деталей. 3. применение тяжелых инструментов при разборке и сборке - клещи, металлический шток (комментатор ниже писал об этом).
First, start by dunking it in diesel for a day or two. The disassembly will go so much easier!
It's an excellent job
Yoooo.... you have some really nice videos bruv
Glad you like them!
@@IronManRestoration 🙏🏼
Good lessons here.
In what NOT to do.
Nice tokarev 👍
Nice restoration
Thank you! Cheers!
@@IronManRestoration pleasure
I had this pistol in the Romanian military. Nicely done.
Со времён СССР выпущен был ТТ
Flash rusted gun with clean grips….
And an aftermarket safety fitted by the importer to the US.
😂
The steel is very good.
Shukar a ostad g cheez ty alla E labi ty banai j
This is a recent import surplus tokarev dressed up to look old. The giveaway is the frame safety.
Amazing restoration!
I’m a former 91F of the U.S. Army. I have a couple weapons while not rusted I still like to learn the fundamentals of restoration. That and jog some memories and spark that I once had back then. I like to know what equipment you use on the daily basis.
Now this is known as best steel
I recall that one of the survivors of the McDonald’s massacre saying that almost every gun owner is one bad day from being a mass shooter
It is a pity that at the very end you scratched the frame while assembling the retainer clip. With a small and thin piece of plastic you could have avoided it.
😔
Thank you for letting me know what materials you used to blacken the parts
What is the name of the materials used to change the color of weapons?
Dos hermosos rayones le hizo al terminar de armar. Muy descuidado!
Good job...👍
Thank you! Cheers!
Can you share the formula of the hot bluing solution. It gave a great finish.
NaOH : KNO3 : H2O
1:1:1
Also I have need for that
please can you give me more accurate information about this beautiful coloring of iron, because I want you to color a weapon as well, please tell me more precisely the material you used, how long should I stay in that water Thank you very much for the video and best Respekt !
@@durimibrahimi4742 وانا وانا مثلك محتاج للمعرفه
Разбирает медленно но по варварски. Бьет металлической выколоткой по прицельному приспособлению(можно ведь через деревяшку и по затыльнику затвора было сдвинуть), снимает деталь металлическими щипцами практически на сухую пожалев каплю ВДшки капнуть на ствол, крутя перед этим в отверстии выколоткой на излом. Да много что можно заметить в действиях "на отвали", "Техника любит смазку и ласку".
Тут конечно не настоящая реставрация, а так.....чистка, да и метал в идеальном состоянии, так что боятся нечего, можно и молотком))
В конце, при установке фиксатора затворной задержки, знатно так расцарапал свое свежее воронение))
It takes talent to do something like this. Weapon now looks pristine. Perhaps this will work on my badly rusted sccy cpx 2
I wonder how much talent it to let this sit in Salty water to intentionally Rust the thing , C,mon Really
@@notnowchief.3089 so you are suggesting the author of this vid is in fact one in the same that threw this weapon in the water?
awesome
hard work
E meu sonho de consumo parabéns ficou linda
looks like TT-33 "TOKAREV" Polish made for US markets
Чудак на букву М. Неужели нельзя было взять пластиковый или деревянный шток, когда скобу застегивал, чтобы не царапать воронение. И ещё не стыдно было выложить это в сеть
Very informative and amazing video 👍🎖️🏆
Glad you enjoyed it
Уверен, что после суток в солярке этот пистолет стал бы прекрасно стрелять. Странно называть реставрацией очистку совершенно комплектного и рабочего оружия.
Да они его для видео тупо покрыли ржавым лаком и типа вот лежал заржавел. Если бы он где то гнил там бы раковины были километр глубиной
Совершенно верно
Согласен,я видал достаточно ржавого оружия,это фэйк
Гамнюки !!! ....закройте свои пащи !!!
Oh, thank you. Great video. I really like your video, you did a great job, I'm sure this pistol will shoot perfectly. Amazing, unbelievable, perfect❤❤❤💪 🐨🐑
Amazing
First to View
amazing. you da man!
These gun restorations are fascinating, but I'm curious about the barrels. Does firing the gun _after_ the restoration help clean the rifling of rust?
Good question. I wish someone answered. I have worked on guns my whole life and don't know this. Any time I've seen a barrel with rust it was bad enough that it needed replacing or destruction. Never had the opportunity to restore a rusted bore. I would expect firing the gun to remove the rust, because of the nature of rust and how it flakes off. I'm sure If it's strong rust though, it could cause severe leading of the barrel though. I've seen bores that had a lot of very minor pitting and the leaded up really bad... so I assume rust would do the same... although with pitting, the holes can be filled in by copper and other fowling to make it shoot like a good barrel without leading up. That is why sometimes it is a bad idea to clean an old barrel too well. You can remove the metals that fill in the dents and pits and that can lead to problems.
@@deucedeuce1572 It is dangerous to fire a rusted barrel, trust me.
It takes a particularly old gun to rust out a bore into uselessness. Now if you restore a lot of old guns you may see it quite a bit. Most guns with a chrome bore will outlast the owner and the elements by a considerable amount of time, additionally most bores have less exposure to elements as almost no one is foolish enough to store a gun with the bore down.
Unfortunately, the uniformity of rust on this gun is indicative of artificial rusting so I’m quite certain the bore is not needing much care or restoration.
А что тут реставрировать???😵он только весь покрыт ржавчиной,ничего не сломано.Разобрать,промыть спецсоставом,смазать и снова собрать.Это делают и в оружейке!😏
Этот "деятель" способен сломать алмазный шар!
Amazing restoration. Hope all is well. 👍👍
Мне одному показалось что оружие было намерено брошено в кислотную среду , а после демонстративно очищенно на камеру?
Да это фейк реставрации. Просто как АСМР
Это реставрация для контента...причем искусственно испорченного пистолета...и даже не раритетного, т.к. в СССР не было на ТТ предохранителя
Ване придстовляете какую редкость, вы отрестоврировали, таких осталось очень мало. Респект.
Zasłużyłeś na medal 😊
kya baat a bai ji meri v bandekhani restore kra do😍
tokarov ili duga devetka ili kod nas bolje znano kao tetejac 😁
Amazing work 😮
Glad you think so!
He sold me this gun and helped me with the price
Грубая работа
На неделю в керосин и этот "ТТ" разобрался бы сам😅
100%
I want to know what materials are used in iron blackening
What chemicals do you use to rust most of these items you "restore"
Different chemical
ماهى الماده المستخدمه فى الطلاء نرجو الرد
Bis auf die letzte Aktion mit den Sicherungsblech gutes Video. Das hätte man mit einen Stück Holz und einen kleinen Hammer reindrücken könenn aber nicht so das 2 Kratzer die Folge wären
Very nice ❤
Thanks 🤗
What gave you the inspiration to restore history like this I’m curious ❤
Good question!
That recoil spring is really scary compared to modern ones. Is there a modern replacement?
Wonderfull
Thank you! Cheers!
ساخت المان.کلت برته بهترین و مرقوبترین سلاح هست
Ага! И совершенно новые щёчки на рукоятке!
The 11 with a circle around it, on top of the slide shows that this is a Polish Radom, post WWII.
Искупали его в хлорном железе а потом героически чистили...😂
всё замечательно, и надо же такую царапину захерачить на 14:40 ))) эх
1:48 они там была с самого начала.
ТТ-33 это наш советский пистолет победы !
aku suka 🥰😍🤩💗💗💗
All those "years of rust" no pitting..nothing in the metal.
How long did you really let it soak?
Biggest indicator for me was right at the beginning when the magazine was as rusted as the outside surface. It’s not open to elements so the rust shouldn’t be uniform inside and outside the gun. Plus the grips are both evenly degraded. If the gun was just lying around collecting rust, one side of the grips should demonstrate more extreme degradation due to exposure vs the side lying flat on a surface.
probably artificial rusting
... very poor restoration "skills"
عمل جيد فنان وبدون هراء او ثرثرة
İlk defa 11 numara emniyeti olan takarov gördüm Türkiye de cok kullanılan güçlü kuvvetli bir tabanca ama mermisi Zor bulunur.. keşke kumlama dan sonra boyamasaydin
lasy job!!!
Молодец хорошая работа
Find these videos very relaxing and calming, great to see these remarkable transformations
Thanks
Antes de empezar a golpear la pistola, yo hubira verificado que no estuviera cargada.......Excelente restauracion
Nice
Fantástico, inacreditável, perfeito❤❤❤❤❤❤❤
Thank you cheers
Drugs boys only Philippines 🇵🇭 death ☠ ☠️☠️☠️☠️☠️☠️☠️😈😈😈🇵🇭🇵🇭🇵🇭🇵🇭🧔♂️🧔♂️🧔♂️🧔♂️🧔♂️☠️☠️☠️☠️☠️☠️😈😈😈😈😈😈😈😈😈😈😈😡😡😡😡😡😡😡😡😡😡😡😡😡😡
@@IronManRestorationза лохов нас держите?😂
Две царапины в конце тоже были идеальны!
I can easily opening almost everything ( sometimes with brokering the parts;) ) but mostly im not able to put back those parts.. i have a few parts extra or less when I complete it ;)
Good job Welldone 👍🏻🤩
Best Restore ever made by Mr Professional 👍🏻🤩
太漂亮了，卖给我吧，呵呵🙂
You could have run the sides of the slide on a belt sander to smooth out the rust pits before bluing it. The same goes for the frame.
It seems that the Tokarev followers John Browning’s design pretty closely except for the caliber of the ammunition
Эгэ! Да это же любимый пистолет русских киллеров и бандитов из "святых" девяностых __ ТТ (Тульский Токарев) 1930 года. Вдохновение на него пришло от сэра Джона Мозеса Браунинга. который вдохновил конструкторов -- оружейников в десятках стран на создание клонов.
Were those grips made of shaped lacquer? Or some kind of wood or animal horn?
I have a very hard time believing this is a 90+ y/o pistol. You also screwed up the bottom of the rear slide serration when you used that file. The punch you used on reassembly damaged the top of the slide. And you scratched the crap out of it when you used the punch again at the end.
Muito bom, poderia ter ficado melhor se tivesse deixado no prata
It's a shame you used a file on the barrel grip, a Dremel would have done considerably less damage
Good job lakin hamber mechanism complete nai kholte dakhay
Not a single bit of pitting under the rust. How fortunate.