💎 How To Fix Dstv Error E48-32 | No Signal Problem
Вставка
- Опубліковано 14 лип 2023
- How To Fix Dstv Error E48-32 | No Signal Problem
__
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER :
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#satellite #tv #pbteck #pbteckinfo #lnb #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteckgh #pbtecknology #canalsat #canal+ #free - Наука та технологія
I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...
👍
Thank you very much it really worked and all the channels are showing
You're highly welcome ❤️
Thank you so much, it worked
You're highly welcome
Thank you so much. This just worked for me
You're highly welcome ❤️
this video saved my life.
Much love ❤️
Thank you very I just did mine ❤
You're highly welcome ❤️
Thanks brother.
Much love ❤️
My decoder is connected to a primary decoder and it has been showing this for like 2 weeks now. What could be the issue. Because ive chevked the cabling and everything is right. Please help me
Try Increasing the signal quality from the satellite dish
Very helpful. Thanks for sharing.
You're highly welcome ❤️
❤
❤
Mine was working fine,, until yesterday when i hard a problem with my hard drive,, so i reset my settings to factory default, i never got the signal after that reset,, what could be the problem?
After factory reset, you have to select the right Satellite + LNB in the Installation wizard for you to get the signal to scan.
Carefully watch the video and apply the right settings to get the signal back. Make sure to connect the signal cable well.
My DStv stopped showing,I don't know what I mistakenly pressed on the remote
Cancel this stupid service because dstv is nonsense
Reboot the decoder
If it says no signal on installation wizard?
Connect the cable well and adjust the satellite dish to get a stable signal
How do we increase the signal
Adjust the dish to improve the signal quality
How do u adjust the signal strength
Am stuck also😢😢
By Carefully directing the satellite dish to stabilize the signal
What to do when it says signal lock:locked
Hello some channel are not working
Improve the signal quality. Get some additional percentage.
How to get additional percentage
@@pbteckinfoHow?
Some channels are showing while some aren’t
The signal from the satellite dish is not good enough. You should let someone adjust the satellite dish a bit, to get a stable signal.
Hy how did u fix
Stacked on step 4
Get a stable signal from the satellite dish
@@pbteckinfo how do you do that?
It worked but only for 5 minutes and goes back again. But it's only no signal on some channels coz others are playing
The signal from the satellite dish is not stable. You'll need to adjust it for all the channels to start working
@@pbteckinfo how do I adjust it? Can I do it myself or call a technician?
You can do that yourself. But if care is not taken, you might lose all the signal
@@pbteckinfo thank you
So the srength should be 50 right to get all channels work
It's not working
Adjust the satellite dish for a stable signal