Get MORE POWER From a Chainsaw- EASY Exhaust Modification & Carburetor Adjustment (Start to Finish)

Here's how to get more power from a chainsaw by giving it mild exhaust port (drill out muffler) and adjust the carb mixture for the new setup. Buy this saw cheap on Amazon: amzn.to/3xM3FGZ
Here is my review of the cheapest saw on Amazon: • Cheapest Chainsaw On A...
Part 2 where we fix the problems with the Remington Rebel: • Cheapest Chainsaw on A...
getting a bit more power from a cheap chainsaw is quite easy with an easy exhaust modification and the critical carburetor adjustment. You just need to ensure the carburetor is adjusted correctly and stay a bit to the "rich" side so you do not burn up the engine due to running lean.
Join the Patreon Squad! mkme.org/Patreon
Become a channel member ➢ / @mkmeorg
-----------------------------------------------------
➡️Gear to Buy ⬅️
Buy one of my project kits and support the channel ➢ store.mkme.org...
Gear I use in these videos ➢ mkme.org/Gear
Shop Amazon US ➢ mkme.org/AmazonUS
Shop Amazon CAN ➢mkme.org/AmazonCA
Shop Amazon UK ➢ mkme.org/AmazonUK
Shop eBay ➢ mkme.org/ebay
Shop my MKME.org Store ➢ store.mkme.org
Shop Bangood ➢ mkme.org/banggood
Shop Gearbest ➢ mkme.org/gearbest
Grab a cool Maker T-Shirt ➢ mkme.org/merch
------------------------------------------------------
➡️I have MORE UA-cam Channels you need to subscribe! ⬅️
MKME Media ➢ / @mkmemedia
MKME Outdoors ➢ / @tactechtrail
MKME TV ➢ / @mkmetv
------------------------------------------------------
➡️Learning and News ⬅️
Daily maker/electronics news! ➢ news.mkme.org
Learn to make these projects ➢ learn.mkme.org
Make money from your hobbies ➢ mkmemedia.com
Protect your data with the best VPN ➢ www.privateint...
------------------------------------------------------
➡️Get Social with Me ⬅️
Join the MKME Discord live chat here ➢ / discord
MKME Forum ➢ forum.mkme.org
Twitter ➢ / mkmeorg
Instagram ➢ / mkmeorg
Facebook ➢ / ericwilliam13
-----------------------------------------------------
➡️My Websites and Related ⬅️
Main Site ➢ mkme.org
Blog ➢ blog.mkme.org
MKME Facebook Page ➢ goo.gl/aXg29
Odysee ➢ odysee.com/@mk...
Mail:
MKME Lab
PO Box 493
Goderich Ontario Canada
N7A 4C7
-----------------------------------------------------
Sweet Tunes often from NCS: / nocopyrightsounds
And Audio Library Plus: / @audiolibraryplus
Thanks for Subscribing!

[@TacTechTrail]

Here is my review of the cheapest saw on Amazon: ua-cam.com/video/JwGYZfc2OG8/v-deo.html
Part 2 where we fix the problems with the Remington Rebel: ua-cam.com/video/96Hx3bqoamQ/v-deo.html

[@EcSsAwS]

Used to own this exact same saw. Along with the "outlaw". Both of them were garbage throw Away saws. But I suggest cutting the output deflector basically in half
The exhaust blows directly into the the chain

[@ThirdEyeThrive]

Which screw driver ended up working ? PAC man ?

[@matejkubis]

Good video !

[@TacTechTrail]

Glad you enjoyed it

[@morgan79347]

Like the hat at the end.

[@TELOYSTV]

Nice brother ❤️👍👍

[@jackfrosty79ify]

It's a Craftsman that looks like a Remington .

[@rideon2-997]

It’s almost like you know what you’re doing

[@TacTechTrail]

Once in awhile I get lucky :)

[@jamesbaumfeld6126]

You seem to undersell your skills, however my question is why always blue and never red lock Tite. That red was for the extra heat of exhauste? Not nit picking it's a legitimate question. Thanks........James

[@TacTechTrail]

Blue holds fine on exhaust. Red requires torch level heat to debond it- it doesnt belong on small engines or fasteners in to aluminum etc. If you end up needing red to hold anything from vibrating loose- there is something wrong with the equipment/design. Good for sinking in say a collet or bushing where you dont need to remove without heat and want a good seal/permanent hold. Cheers

[@jamesbaumfeld6126]

@@TacTechTrail thanks for the reply, I learned something new thanks......James

[@Pinyoo81]

It's barely revving up. Not a happy saw...

[@TacTechTrail]

Funny it told me it was quite content

[@Broddi169]

Because of emissions they do not come rich from the factory but dangerously lean. Your saw is just put of tune.

[@TacTechTrail]

Sorry but you are quite mistaken. Lean conditions raise combustion temps and actually increase emissions by increasing oxides of nitrogen output. These contribute to acid rain, smog and ozone depletion. Saws will never ever come "dangerously lean". This would be universally bad for manufacturers as the engine would be destroyed on the first cold dense day- and fail emissions.
Best do some actual reading.

[@FunHobbies225]

thats a little toy not a chainsaw lol need a 450 rancher