2011 Camaro 2SS/RS - Heartbeat Supercharger and Camshaft Install - May 2021
Вставка
- Опубліковано 5 чер 2021
- Went big and installed the following items in 6 days. Thanks to Ruben and Cesar for the extra hands!
ENGINE:
Magnuson Heartbeat Supercharger
Roto-Fab CAI Heartbeat Kit w/Dry Filter
Soler Performance Ported Throttle Body 95mm
Kooks LT Headers 1 7/8” w/ High Flow Cats
ARP Header Bolts (434-1202)
Comp Cam Camshaft (54-000-11)
•13018R/13022R HR 116 + 4
•231/247 Duration @ .050
•.617/.624 Valve Lift
•116 + 4 LSA
Comp Cam Spring Kit (26926TS-KIT)
Comp Cam Pushrods (7956-16)
Comp Cam Trunion Kit (13702TL-KIT)
Katech C5-R Timing Chain (HME-G68V-2)
Melling Oil Pump (MEL-10296)
2012 GM Heater Hoses Re-Location (22962570)
Mighty Mouse Catch Can Camaro 5 Wild (Holley Oil Cap Adapter)
Holley LS Tall Valve Covers - Red (241-404)
GM LS2 Chain Damper (12588670)
GM Cam Gear (12586481)
GM Crank Bolt (12557840)
GM Cam Bolts x3 (12556127)
GM Front Timing Cover Gasket (12633904)
GM Front Crank Seal (12585673)
GM Water Pump (19207665)
GM Balancer Bolt Install (11570163)
FUEL and IGNITION SYSTEM:
ZL1 Fuel Pump (19303293)
ADM FPCM for ZL1 Fuel Pump
LS9 Fuel Injectors
Allstar Performance Fuel Pump Access Panel
ZR1 Spark Plugs (12571165)
MSD 8.5mm Super Conductor Wires
CBM Coil Relocation Kit (CBM-11011-LS-KIT)
Wire Socks - Авто та транспорт
That's an incredible amount of organized work. Those valve covers are sweet.
Thanks! I had a blast mapping it all out before the install and then executing the plan.
Great video Allen. Wow, that's a lot of work but I'm sure it's all worth it in the end.
Thanks! It was definitely worth it. I’m enjoying the setup.
Beatiful song 👍
Would you do anything different if you did it again? How has it held up? What's the gains?
I would probably swap out the lifters and trays for new ones. I didn’t do this because I just didn’t know to at the time. BUT, the engine is still holding strong with lots of pulls! I currently have 650hp on E85 and about 580 ft-lbs torque. I’m getting a new dyno tune in 2 weeks though.
What was the absolute total for the zl1 bumper with the paint and fog lights?
Great question. I did that upgrade back in 2013. But I remember at that time it was around $750 for paint and the whole kit. Not sure what it’s priced at now though.
This looks like it was done in LA? If so let me know if you guys are available to install a similar set up in my 2013 SS
Hi Shawn. I did most of the install but had some help from some buddies. What are you looking to install on your car?
@@allenwoolsey Kooks headers, throttle body, supercharger, cam shaft, and catback exhaust.
@@shawnhubbard7056 that’s going to make for a fun ride! Unfortunately I don’t have a shop and have my driveway full with 3 other project cars of my own. I’m here for advice or questions though.
@Allen Woolsey Appreciate it. I'll definitely be reaching out in the near future. I've never worked on a car, but I looked over the installation manual for the Magnuson, it doesn't seem that difficult, besides drilling the pin holes. I'm sure I'll have questions though.
Allen how much was this set up?
It was a lot of money. I saved up for a while. Just depends on what you want to do, but it can easily creep past $12k
Cool.. brings me back to the days when me and BF worked on ours cars. Just having a great time messing with cars.. more power. Sorry to the GFs that came and gone. Haha.
Yea, more power is always fun. I actually find I have more fun building the car than I do driving it. Weird, I know 😂
What stage is that camshaft, love the setup
It’s not a “Stage” cam, it’s a custom cut from Comp Cams:
Comp Cam Camshaft (54-000-11):
13018R/13022R HR 116 + 4
231/247 Duration @ .050
.617/.624 Valve Lift
116 + 4 LSA
I see, I was looking at the gpi pd2 blower canto. Go with my heartbeat
Is the hood closing with this ?
Yes, the hood closes just fine. The supercharger is actually no higher than the stock intake manifold. No clearance issues at all.
How much would u charge for a installation
Unfortunately I don’t do installs for others at this time. This is more of a hobby for me. But if you have any questions, let me know!
What headers are these ?
These are Kooks LT 1 7/8”. They sound so awesome!
@@allenwoolsey nice. Same as what’s on my car. Are yours ceramic coated ?
@@cali_scruff1697 Yes, mine are ceramic coated to keep the heat down. Went with the silver color.
what size pulley are you running?
I’m currently running a 87mm pulley by Magnuson.
@@allenwoolsey is that what they set u in kit or did you get that separate, did you have to change the belt or nah and also what PSI did that give you cause i heard you lose some psi with like headers and cam that’s why i wanna change pulley to gain it back
@@trent9426 I bought that pulley separately. My psi was at 9psi before and after the pulley change, we set it to 10psi.
@@allenwoolsey what LB injectors are u running cause i think the kit comes with 42LB and that isn’t even close to enough
@@trent9426 I’m using the 1000cc FIC Fuel Injector Clinic Injector Set.
how much did it cost you to supercharged it
It wasn’t cheap, but the Magnuson Hearbeat price is on their site. I believe it was around $9k for that. I did a lot more than just add a supercharger though. Price all depends on what your goals are.
@@allenwoolseyhey man i’m putting this supercharger on my car in a few months, looking for like 600 wheel nothing crazy, im already pushing 500 with just FBO, what mods do i need to make it work?
@@trent9426 you can just bolt it on with what comes in the kit, which would be injectors, pinning the balancer, etc. I chose to go in and replace anything I took apart as well as upgrading any parts to handle more boost when needed. It all just depends on your goals and budget.
@@allenwoolsey do you have the exact link to the kit? i found one but i wanna make sure it’s the right one, how much power can these engines/ trannys hold without problem?
i want to get the red valve cover also, will i need to do a relocation kit or did you just do it for your own want,
Can u put this on a rs
I believe this kit is for an LS3 engine, not sure. Check on Magnuson’s site for applications. But RS is just a trim package, it doesn’t determine your engine type.
@@allenwoolsey ok I was asking for a friend I got the ss Camaro