m 12 Milwaukee angle die grinder bit removal. It's an awesome tool! Please like and subscribe. M12 Die Grinder www.amazon.com... Bristle Disc www.amazon.com...
This is the exact video I needed to see. Mine came like this as well and I had the same confusions of wondering if I bought the wrong sized bits. Staring at the manual figuring I must be doing something wrong. Thanks for making this video!
Two years later and this video just saved me after hours of confusion and going to multiple hardware stores. I was asking the clerks who seemed as confused as me if there was an adapter that dropped the 1/4 inch down to 1/8. Thank you!
Hello, I had the same problem too. Thank you so much for sharing this video. I bought the tool over a year ago and wanted to use it today and realized the grinding wheel attachment would not fit. I was very lucky to find your video. You made my day!! Thanks again.
0:55 is what everyone is here for. Collet needs to be snapped inside the nut and not tightened down on top of the collet as it came from the manufacturer.
I really want to thank you for this video. I've been struggling with this for so long! It was so hard to remove and install different sanding disks or wire wheels. Once I took it apart and installed it like you did in the video its a night and day difference. Thank you!
I've never felt so dumb when I tried to get my 1/4 cutoff bit into my 1/4" grinder....I would have never guessed to try what you showed in your video and the instructions did not help me at all to figure it out...great vid
This spindle/collet system is mocking the ER machine collet system. The nut forces the shoulder of the collet into the taper and makes a connection unlike older collet systems that rely on the nut for security. So the nut on the ER system is tight on the spindle nose but it’s primary purpose is to seat/unseat the collet from the spindle which is an independent connection from the nut.
Cause straight up, all die grinders re like this. Just loosen the nut and tap it with your supplied wrench. It shocks the tapered collect loose. Every air/electric die grinder is the same.
![Why Some People Hate This Milwaukee M12 Die Grinder [COLLET ANGER]](/img/n.gif)
I cant believe this video is still helping people a year later. GEEZ Milwaukee...you would think they would install it correctly. Saved me. Thanks.
Anytime buddy
This is the exact video I needed to see. Mine came like this as well and I had the same confusions of wondering if I bought the wrong sized bits. Staring at the manual figuring I must be doing something wrong. Thanks for making this video!
You're welcome!
Two years later and this video just saved me after hours of confusion and going to multiple hardware stores. I was asking the clerks who seemed as confused as me if there was an adapter that dropped the 1/4 inch down to 1/8. Thank you!
You just saved my life and Home Depot from an ear full of unwanted words lol. Thanks a million!
No problem!
Hello, I had the same problem too. Thank you so much for sharing this video. I bought the tool over a year ago and wanted to use it today and realized the grinding wheel attachment would not fit. I was very lucky to find your video. You made my day!! Thanks again.
Happy to help
This is gold! Thank you for taking the time to share this.
Anytime!
Thanks man was loosing my mind when a freaking 1/4 fitting wouldnt go in a 1/4 die grinder 😂
0:55 is what everyone is here for. Collet needs to be snapped inside the nut and not tightened down on top of the collet as it came from the manufacturer.
I really want to thank you for this video. I've been struggling with this for so long! It was so hard to remove and install different sanding disks or wire wheels. Once I took it apart and installed it like you did in the video its a night and day difference. Thank you!
Anytime!
Mine came the same way. Thanks for the video.
Thanks for this video mines arrived just like yours after 2 months using it I just realized and fixed it thank you !!!
You're welcome!
Thank you for this video. Mine also did not have the collet in correctly and I have been beating my bits out with vice grips and a hammer.
I did that too
Awesome bro. Never would of known.
Thanks for the tip mine came the same way
Thank you for the video. Mine also came with the tip jammed on there.
I've never felt so dumb when I tried to get my 1/4 cutoff bit into my 1/4" grinder....I would have never guessed to try what you showed in your video and the instructions did not help me at all to figure it out...great vid
It took me some time too.
Fixed my problem tonight. Thank you!
My nut is comes off with the collet still in the machine. Not sure how to fix it.
This video was also a help for me to and now I don't have that problem with it works great now thanks for the video 👍🏽
Thank you very much..👍
Same issue, Thank you!
Thanks so much I fixed it
Thanks alot mine just arrived the same way and I was really scratching my head in confusion
It took me HOURS to figure out lol
Ur one solid guy
I do my best
This spindle/collet system is mocking the ER machine collet system. The nut forces the shoulder of the collet into the taper and makes a connection unlike older collet systems that rely on the nut for security. So the nut on the ER system is tight on the spindle nose but it’s primary purpose is to seat/unseat the collet from the spindle which is an independent connection from the nut.
Thanks man
Exactly my problem! Thanks!
You're welcome
same thing happen to me too. thanks for sharing
Hello I have the same issue where it doesn’t fit I would need what part ? To make it fit ?
Cause straight up, all die grinders re like this. Just loosen the nut and tap it with your supplied wrench. It shocks the tapered collect loose. Every air/electric die grinder is the same.
None of my air grinders are like that
Thanks
What size are the little wrenches
I have the nut off and the bit still won’t come out I’m furious any tips?
I had to use good pliers and twist it
I tried for 3 hours and accidentally broke it, now they say they won’t warranty it so I just ripped it in half and now I have to buy a new one
@@richardlarson5886 take pictures and email them to Milwaukee and explain what happened
if you put a grinder bit from another the problem is fixed😂
This video does not need to be 6 minutes
This is one of those things I hate guys that do tool reviews don't go over and act like it's something everyone will figure out right away
Took forever for me to figure out lol
I watched this video to learn how to take that collet thing out and didn't even show me how to take it out. Wtf
It just comes out. If it's stuck, that's another problem
@@brianstechtips5721 figured it out from someone else.
@@PentastarGarage excellent