12v battery level indicator circuit [NEW]
Вставка
- Опубліковано 6 жов 2024
- #HowToMake
#BatteryLevelindicator
#12vbattery
#fullcharge
battery level indicator 12v
simple 12 volt battery level indicator
how to make 12v battery level indicator
12v battery level indicator circuit
battery level indicator
12v battery level indicator circuit diagram
12v battery full charge indicator
12 volt battery full charge indicator
how to make battery level indicator
new electronic projects
In this video i'm showing how to make easy and accurate 12 volt battery level indicator circuit using zener diodes, and if you are familiar with zener diodes they work as voltage barrier when used in reverse polarity, and when voltage in circuit reaches more than rated zener voltage, then it pass that excess voltage to another end.
Same method is used in this circuit when voltage crosses the rated zener voltage then excess voltage passes to other end to which led is connected and then led glows and indicates charge level in battery.
👉Circuit Diagram download link
drive.google.c...
Join Group: / 819126578700997
Follow Page: / creativetechvids
Music Credits
Music: Views
Musician: @iksonmusic
Boa noite
Vou faz um desses incrível projeto para a minha parafusadeira. Já que o indicador de carga queimou
Very useful and interesting info. I like the simplicity of this LED Voltage ladder readout. No logic gates with op-amps. Thanks!
Glad it was helpful!
Creative techno
Nice circuit and I built it but to add it to the charger circuit
Please let me know if this level indicator is safe to have it continuously connected to the battery without the push button switch
I have used 1/4 watt zeners and resistors
Awaiting your reply
use 9v, 10v, and 11.1v zener for best monitoring and use.
Red=900ohms, yellow 750 ohm and Green 680ohms resistor for leds brightness and safety consumption.
Thanks for your suggestion, i will try soon
The idea of using zener diodes is actually pretty smart. good job
Thank-you
ReaDy
Thanks for watching 🙂
Sir,
Very nice explanations & with ckt diagram .
ALL correct & full fledged one !
Thank
Thanks for watching, don't forget to subscribe for more videos
Good work sir watching from Ghana 🇬🇭
Thanks for watching my friend 🙂
Very good and useful, thank you, I will use LEDs of a few millimeters to put everything in a pen or little box... greetings mr.
Nice idea of pen , thanks for watching.
I really appreciate your videos, they're very informative. Do you have any videos for a battery indicator that is 48V? We have electric utility carts at my job and we cannot tell when they need charge. Thank you.
Thanks for appreciating, currently there is no video for 48v battery, but I'll soon try to upload video for 48v.
Thank you for this awesome video, my friend!
Could I ask you what kind of resistors I should is if I were to use a single RGB Led with same zener diode configuration to light each color for each voltage level?
Thank you so much!
Great that you have added a circuit diagram ! .... the 12 Volt battery charge ( float ) voltage is 14 Volts ( and NEVER higher ! ) , maybe an additional BLUE LED could be fitted with suitable voltage Zener to indicate charger is maintaining the battery at 13.8 to 14 Volts ? ? ...... DAVE™ ........
Вольтметр цифровой китайский поможет😉
Thanks for the reply this video I have watched , my question is can we connect to 12 volt 150 Amps batter home inverter .plz answer me
Yes you can
@@CreativeTechos both circuit or the new one ... Plz make a video on that connecting to home inverter with higher Amps like 150 or 200 Amps battery (12 volt ).
You can use zener diode based circuit with higher amps
@@CreativeTechos thank you so much for the clarification , I would be very glad if you made a video on that .
It's a great ideaBattery level meter for 18650 battery Would you please upload the video of?
It is already uploaded please find video on my youtube channel
Very good information and very useful video...Thank u very much
Thank you for the tutorial.
Is the 1/4watt resistors ?
Yes all Resistors used is 1/4w
@@CreativeTechos and the diode zener 1/4 too?
Great video! If I want to test 6V battery, what zener diode should I choose?
For 6v, video is already on my channel, you may check that out.
Please do a lead acid battery equalizer project. It's useful for all who use solar especially.
Wonderful circuit bro !
I hope It'll help me to know the voltage level of my batteries thank you!
Thank-you so much
You can use a voltmeter ...
आपका यह जनकारी बहुत अच्छा लागा धन्यवाद।
Thanks for watching my friend 🙂
Very nice! I want to make this for 8.4 volt (2S lithium ion battery) . Which value should be changed? I mean what will be the values of zener diode and the resistor's. Please help. Thanks in advance😊
Use Zener Diode "8.2 volt & 6.2 volt use resistor upto 1k ohm
Very good circuit.
I want to see large +high Ampiar thank you . Asala mo alaikum.
Cooolest and accurate thanks bro.
Most welcome bro
Sir pls which is best
The first video or the second?
Appears simply & easy sirji.
Thankyou
Its works with smd led ? How if we using same led colour ? All i know every colour of led has a differen voltage. If we replace the colour this still work ?
Top DIY elektronik 👍
Good job 👍👍
Thank-you
can u please list down the item u used in this video thx
Gostei muito obrigado sorocaba são Paulo Brasil
Thanks for watching 🙂
Eu fiz ficou muito bom demais ok
Sorocaba são Paulo Brasil
Why are the diodes used here instead of connecting the LEDs in series as in your earlier design??
I can use 3 mm led ?
& Resistance use.
Thank you Sir!
My pleasure, Thanks for watching my friend 🙂
Sir I want only one to indicate I.e if it is fully charged- only green glow or if half charged -yellow glows if Discharged -red
Can it be possible
Use RGB led with common cathode or anode
just what I needed :)
Thangk you...
My pleasure, Thanks for watching my friend 🙂
Kya ye bulb diffuse hai yes or no?
It is not important to use diffused or clear led . You can use any in both
good job but... is better to test battery under load.. just place a resistor (of correct power) in parallel with your circuit to have a real test.
Thanks.good job
You're most welcome
Very good 👍
Thank you! Cheers!
Can you make one without zener diodes? Thanks
I love the innovation 💡
Being kind of new to all this is there a 'parts list' that I can go by? That would be truly awesome!! I want to add a couple of these to my tractor and backup generator!!
Sorry for that I'll update part list with links in description.
Give couple of days
@@CreativeTechos Thank you so much!
Thank you sir ☺️
My pleasure Thanks for watching 😀
@@CreativeTechos sir your Instagram ID
Actually I'm not using much, using fb
fica melhor adicionar um Blinking LED + 12v zener, pra indicar 15v em carregamento, trocaria o led de 9v por 8v e o de 8v por 7,5v "ou 6v".
Thanks for watching, thanks for your suggestions👍
680 ohm resistor kitne watt ke hai
All resistors 1/4w
Thanks for you
My pleasure, Thanks for watching 🙂
Pode ser feito para 3,6,9 volts?
Yes just, need to be adjusted with zener diodes.
Good information video 👌👌👌👌♥❤
Thank-you
Do you have a video with this but for a 1.5 volt battery
Great work
Thanks for watching 🙂
Is this circuit work on a 12 v car battery
Yes
Bro please send the buy link of all these products seperate.
Nice video, thanks :)
Thanks for watching my friend 🙂
9v battery must use zener diode what series bro??
Make it 7.5V, 5V and 3.3V for the zeners.
So, how come you didn’t include the button in the initial wiring presentation? 😢
as far as I know all buttons are attached at the beginning of the positive wire
Instead of zener diode what we can you ?
Zener diodes is main component in this circuit.
Is this work on home inverter battery?
Yes
Can you do a video on a battery meter circuit for 3 - 3.7V lithium ion batteries in series for a 12.6V battery. Most videos I have seen are for lead acid batteries in 12V I wish to see this for lithium ion 12V battery. Thank you.
I'll soon upload for 3s 3.7/ 12v lithium battery.
Bro please send the buy link of these products
Coba buat indikator baterai 18 volt mr.
Check out New battery level indicator circuit uploaded on my channel.
Nice ur lacture.pls make a ragulater suply circut on 1.5 volt to 24 volts on 10 amps or 1.5 t0 19 volts on 15 amp pls help .
Check out on my channel already uploaded yesterday 1-30v 10A adjustable power supply circuit
ua-cam.com/video/J8KifBptLYw/v-deo.html
Can use this to motorcycle fuel gauge
Super 👍👍👍
Thanks for watching 🙂
Last me jo circuit pcb board par banaya hai use sikhao
You can make this on pref board by following circuit diagram
Good video Sir
Thanks
Sir 3.7 volt battery level circuit video
ua-cam.com/video/ABKq4kbZF4U/v-deo.html
Hi what the LED volt rating on each one
Red 2.2v, yellow 2.2v & Green 3.2v
@@CreativeTechos thank you very much. That will help very much
For 18650 batteries do not have?
Already uploaded on my channel, you may check out
very good!!!
Thanks
Can I ask please, what is a battery meter actually measuring?
I ask because I asked a company I’ve just bought one from whether it was a simple to read voltmeter/ammeter but with a % indicator. But they said it wasn’t.
But your demonstration suggests it is a voltmeter! Or is it to do with ohms?
It has to do with the voltage drop across each LED. LEDs have a posted voltage drop usually around 2 V for red LED, and the other colours can have 3 or 3.5 volt drop. When your battery has too low of a voltage you do not have enough Voltage to light all LEDs. Therefore the LED with the highest Voltage Drop will go out first and then the next one with the highest voltage drop. So you are monitoring voltage. Check your LED voltage drop with your multi meter. Just take your LED (with no power - before you add it to the circuit) and set your meter to the DIODE reading and connect the meter leads across the diode and you will get a reading in volts. This will be the voltage drop for each colour of your LEDs. Remember LED stands for Light Emitting Diode (so it is just a diode). He is using ZENER diodes to accomplish the same thing. You could just use a regular diode to protect the circuit rather than using the zeners to shut the LEDS off.
Very good👍
Thank-you
Bhai 3.2v battery ka bano👍👍
Is we use 1k resisters
Bro components online purchase kaha se kare
You can purchase components in india on this site, or download their app form playstore
www.electronicscomp.com/electronic-components
How or where can i add a pot or a resistor and the led cause i dont want to to be bright and noticable at night..thief like shiny thing
Plz make led running controler for home
Didn't got you, please mention fully.
@@CreativeTechos led strip light speed controller RGB plz make circuit
Got it, RGB leds strip with Speed control in colour shifting, I'll try to upload ASAP
Bro please send the buy link of all these products separate
Bro make this same circuit but its range increase at 14.4v
You mean green led should glow at 14.4v?
@@CreativeTechos yes bro
I'll try to make in new version, Thanks for suggestions 🙂
Fuel level indicator banao bro
Удобный девайс, но для автомобильного акккумулятора хватило бы и двух светодиодов, потому что на 11.5 вольт он уже не заводит автомобиль
ব্যাটারিতে লাগানো অবস্থায় যদি চার্জার কানেক্ট করা হয় তাহলে তো সব গুলো বাতিই জলে থাকবে , তাহলে লাভ কি হলো ?
Can I charge 4 18650 batteries with this 12v mount?
Check out this video to charge 18650 based 12v battery with adjustable autocut off on full charge
ua-cam.com/video/nvlOeDHkwK0/v-deo.html
Good
Thanks for watching 😀
Does it work for 3.7V and 6V?
No, for 3.7v & 6v check out my youtube channel its already uploaded
Good 👍👍👍
Thanks
Super
Thanks
it's work on 12volt 180AH big inverter battery????
yes
Thanks for reply
Sorry for replying now i missed your comment, yes you can use.
Trog toanhoc :chi co gia tri tuongdoi (T D 10 :3 va 20 : 6 )
2-1 =1 ladi nhien (con trog "Tinh yeu thi muon ve)
Lay chu Tam L A M diemchin...?
English please
Bro please tell zener diode kitne watt ke hai correct value
You xan use minimum 350mw
Aur maximum
Bro es circuit me tumne kitne watt ke zener diode estemal kiye hai
350mw use kiya hai
Сопротивления надо менять. Слишком сильно горит красный и слишком слабо зелёный.
Good.
Thanks
Bro in this circuit, how many watts of zener diode which has used in this circuit
350mw zener diodes can be used
Bro thanks but a problem arise that 350mw is not available please tell me website where I purchase it
You can use also greater wattage then this, also components can be easily sourced from ut source
Ye resistor konsi film ke hai
a.metal
b.carbon
Nice
Thanx
All zener diode kitne --mw ke hai
350-500mw
24v k liye b dalo
Ok I'll upload soon, subscribe and stay updated
Please 72 volt circuit diagram
It needs to be experiment, to find out the exact values of components.
Sir , your video is very useful for me and you are teaching very good habbit. and you are shown in video product name and negative , positive symbols are very very good . But sir , why are you talking in English language this is not good because every people are not educated so they are not understanding your language. so sir please talk in hindi language . If you not know hindi language then edit your video and convert your voice in hindi language . Ok sir please do this work.
I'm thinking to make new channel in only hindi 🤔
@@CreativeTechos dont please just use english that's international language there are some foreign people watching you
Yes, That why i like to make videos in English, Thanks for watching 🙂
If you need private classes, you can ask the creator of the channel, the more views he has, he can receive money in return, if it is in Indian or Chinese, he would have less than half of the views
Sir, you have not mentioned the watts
They look like 1W zeners to me and standard 1/4W resistors.
Pls I'd like to know why the lowest is 10volts and not 0 volts
There the lowest will be 11v where the battery is actually empty, and overdraining it will cause battery to get dead, so it should be maintained as 11v empty & 13v full.
Or if you want level indicator to show level below 11v please check out another video on my youtube channel.
Okay thanks
My pleasure 😊
8v and 9v zener diode is not availabe but 8.2v and 9.1v zener diode is available in market it can work accurate
Please check check diagram, download link is in video description,
Zener diodes used is
8v or 8.1 (8v1)
9v or 9.1 (9v1)
10v or 10.1 (10v1)
Thank you very much
But 8v and 9v zener diode is not available but 8.2v and 9.1v zener diode is available
Yes, they will work, check out this chart
www.onsemi.com/pdf/datasheet/1n4736at-d.pdf
@@CreativeTechos bro please tell me all zener diode kitne watt ke hai
Bro zener diode full details briefly
Please check check diagram, download link is in video description,
Zener diodes used is
8v or 8.1 (8v1)
9v or 9.1 (9v1)
10v or 10.1 (10v1)
Thanks
48v 13s6p?
Copper wire is necessary
You can use any Wire, It is recommended to assemble it on zero pcb / pref bord.
Thanks